ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Axial Compression Behaviour of CFST Columns with Recycled Brick Aggregate Concrete

1. Introduction to Recycled Aggregate in CFST

This paper by Huang Liang et al. from Hunan University addresses a topic that is becoming increasingly important: the use of recycled materials in structural concrete. The specific material is recycled coarse aggregate derived from crushed clay bricks, which is a common waste product from demolition and construction. The idea of using this material in concrete-filled steel tubes (CFST) is attractive for two reasons. First, it is a sustainable use of waste material. Second, the steel tube provides confinement, which can mitigate the lower strength and higher variability of recycled aggregate concrete. This is a practical solution for a real-world problem, and I appreciate the authors' focus on the engineering implications.

2. Test Program and Key Results

The authors conducted axial compression tests on 20 CFST column specimens. The key variables were the recycled aggregate replacement rate and the confinement factor. The results are summarized below.

Parameter Range Studied Observed Effect
Recycled aggregate replacement rate 0% to 100% Bearing capacity decreases as the replacement rate increases.
Confinement factor Varied Higher confinement improves both capacity and ductility.
Failure mode All specimens Similar to conventional CFST: local buckling of the steel tube and crushing of the concrete core.

The failure mode being similar to conventional CFST is a very important finding. It means that the existing design methods for CFST can be adapted, with modifications, for recycled aggregate concrete. The decrease in bearing capacity with increasing replacement rate is expected, as the brick aggregate is weaker and more porous than natural aggregate. However, the steel tube provides confinement, which helps to compensate for this weakness. The effect of the confinement factor is also as expected: a higher confinement factor (thicker steel tube or higher steel strength) improves the performance.

3. Design Formula Comparison and Correction Factor

The authors compared the experimental results with predictions from 12 different formulas based on three theoretical approaches: confined concrete theory, unified strength theory, and superposition theory.

Theoretical Approach Accuracy Safety
Confined concrete theory Closest to test values. Reasonable.
Unified strength theory Conservative. Safe.
Superposition theory Most conservative. Largest safety reserve.

The fact that the confined concrete theory is the most accurate is not surprising, as it explicitly accounts for the confinement provided by the steel tube. The unified strength theory is more conservative, which is safe but may lead to uneconomical designs. The superposition theory has the largest safety reserve, which is the most conservative but also the most wasteful. The authors then took the formula from the Chinese code GB 50936-2014, which is based on the confined concrete theory, and proposed a correction factor θ to account for the effect of the recycled aggregate replacement rate. This is a practical and valuable contribution. It allows engineers to use the existing code formula with a simple modification, rather than having to develop a completely new design method.

4. Practical Considerations for Production and Use

From a production perspective, the use of recycled brick aggregate in CFST columns has several implications. The quality of the recycled aggregate is critical. It must be properly crushed, screened, and free from contaminants. The moisture content of the recycled aggregate is typically higher than natural aggregate, which can affect the water-cement ratio and the workability of the concrete. This is a quality control issue that must be managed carefully. The mixing process may need to be adjusted to account for the higher absorption of the recycled aggregate. In my experience, the use of recycled aggregate in structural concrete is not without its challenges, but it is a viable option if the material is properly processed and tested. The correction factor proposed in this paper is a useful tool, but it should be validated with more experimental data before it is adopted in design codes.

5. Conclusion

This study provides valuable experimental data on the axial compression behaviour of CFST columns with recycled brick aggregate concrete. The findings confirm that the failure mode is similar to conventional CFST, and that the bearing capacity decreases with increasing recycled aggregate replacement rate. The comparison of design formulas shows that the confined concrete theory is the most accurate, and the authors propose a correction factor for the GB 50936-2014 formula. For the practicing engineer, this paper offers a practical method for designing CFST columns with recycled aggregate concrete, which is a sustainable and increasingly important construction material. I recommend this paper to anyone involved in the design or production of CFST columns, particularly those working on projects where recycled materials are being considered. The steel pipe industry has a role to play in this, as the quality of the steel tube is essential for the confinement that makes recycled aggregate concrete a viable structural material.