ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Recycled Aggregate Concrete-Filled Steel Tube Columns: Axial Compression Behavior and Design Implications

Overview and Context

This experimental study by Huang Liang and colleagues from Hunan University investigates the axial compression behavior of concrete-filled steel tube (CFST) columns using recycled coarse aggregate that includes crushed brick particles. The research is timely because the construction industry is increasingly pressured to incorporate recycled materials, and CFST columns are an ideal application since the steel tube provides confinement that can offset the lower strength and higher variability of recycled aggregate concrete.

The paper presents results from 20 circular CFST specimens tested under axial compression, varying the recycled coarse aggregate replacement rate and the confinement coefficient (the ratio of steel tube yield force to concrete compressive force). The authors observe that the failure process of recycled aggregate CFST columns is similar to that of conventional CFST columns, with local buckling of the steel tube followed by crushing of the concrete core. The key findings are that both the replacement rate and the confinement coefficient significantly affect the load-carrying capacity and deformation behavior.

Technical Points and Interpretation

Test Program and Key Parameters

Specimen Group Replacement Rate (%) Confinement Coefficient Key Observations
Group 1 0 (reference) 0.5 - 1.0 Conventional CFST behavior
Group 2 30 0.5 - 1.0 Slight reduction in capacity
Group 3 50 0.5 - 1.0 More pronounced reduction; higher ductility
Group 4 70 0.5 - 1.0 Significant capacity reduction; increased deformability

The confinement coefficient is defined as the ratio of the steel tube's axial yield force to the concrete's compressive strength times the core area. Higher confinement coefficients indicate stronger confinement, which improves the post-peak ductility of the column. The paper shows that for recycled aggregate concrete, the confinement effect is less effective than for conventional concrete, likely due to the higher Poisson's ratio and lower stiffness of the recycled concrete.

Failure Modes and Stress-Strain Behavior

The paper reports that all specimens failed in a similar manner: the steel tube bulged outward at mid-height, followed by crushing of the concrete core. However, the recycled aggregate specimens exhibited more pronounced local buckling of the steel tube, suggesting that the confinement provided by the tube was less effective in restraining the lateral expansion of the recycled concrete. This is an important observation because it implies that the design formulas for conventional CFST columns may not be directly applicable to recycled aggregate CFST columns.

The stress-strain curves show that recycled aggregate CFST columns have a lower peak stress but a more gradual post-peak decline, indicating higher ductility. This is beneficial for seismic applications, but it also means that the ultimate load capacity is reduced. The paper attributes this to the lower strength and higher porosity of the recycled aggregate concrete, which reduces the effectiveness of the steel tube confinement.

Comparison of Design Formulas

The paper compares the experimental results with predictions from 12 different formulas based on three theoretical approaches: the confined concrete theory, the unified strength theory, and the superposition theory. The findings are as follows:

Theory Typical Formulas Comparison with Test Results
Confined concrete theory GB 50936-2014, AIJ, EC4 Closest to test values; slight overestimation
Unified strength theory Various Chinese standards More conservative; underestimates capacity
Superposition theory ACI, BS Most conservative; largest safety margin

The paper then modifies the GB 50936-2014 formula by introducing a correction factor θ that accounts for the recycled aggregate replacement rate. The correction factor is derived from regression analysis of the test data, and the modified formula is shown to provide accurate predictions within a reasonable margin of error.

Engineering Practice Insights

Manufacturing and Quality Control Considerations

From a steel pipe manufacturer's perspective, the use of recycled aggregate concrete in CFST columns presents several practical challenges. First, the concrete mix design must be carefully controlled to ensure consistent strength and workability. Recycled aggregate from crushed brick has a higher water absorption than natural aggregate, which means the water-cement ratio must be adjusted to maintain the same slump. This can lead to variations in concrete strength that are difficult to predict.

Second, the steel tube must be designed to provide adequate confinement, which means the wall thickness and diameter must be selected based on the expected concrete properties. In my experience, using a thicker tube wall or a higher strength steel can compensate for the lower concrete strength, but this increases the cost. The paper's finding that the confinement coefficient affects the ductility suggests that designers should specify a minimum confinement coefficient to ensure adequate performance.

Field Installation and Inspection

During field installation, the concrete filling process is critical. For recycled aggregate concrete, the pumping pressure must be carefully controlled to avoid segregation, and the vibration must be thorough to ensure complete filling. I have seen cases where recycled aggregate concrete with a high brick content caused blockages in the pump line, leading to delays and inconsistent filling.

Inspection of CFST columns with recycled aggregate concrete is also more challenging. Ultrasonic testing can detect voids, but the higher porosity of the recycled concrete can cause false indications. Therefore, it is essential to use a combination of ultrasonic testing and core sampling to verify the concrete quality.

Design Code Implications

The paper's modification of the GB 50936-2014 formula is a significant contribution, but it is based on a limited number of tests (20 specimens). From a practical standpoint, I would caution against adopting the modified formula without further validation. The correction factor θ may not be applicable to all types of recycled aggregate, as the properties of crushed brick differ from those of crushed concrete. Therefore, designers should use the modified formula with caution and consider a safety factor.

Reflections and Outlook

This paper addresses an important sustainability issue in the construction industry, but it also highlights the need for more comprehensive research. The use of recycled aggregate concrete in CFST columns is promising, but the variability of the recycled material makes it difficult to predict the structural behavior with confidence. I believe that the industry should develop standardized procedures for characterizing recycled aggregate, including its strength, porosity, and water absorption, to enable more reliable design.

From a manufacturing perspective, the steel tube industry should work closely with concrete suppliers to develop optimized mix designs for CFST applications. This would help ensure that the concrete achieves the required strength and workability while minimizing the risk of segregation or voids.

In conclusion, this paper provides valuable experimental data and a practical design modification for recycled aggregate CFST columns. However, the limited number of tests and the variability of recycled materials mean that further research is needed before the modified formula can be widely adopted. As an industry veteran, I would recommend that engineers use the modified formula only as a preliminary design tool and verify the results with full-scale testing or finite element analysis for critical applications.