ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Eccentric Compression Performance of Square Steel Tube Basalt Fiber Recycled Concrete Short Columns

Overview of the Study

This paper by Zhang Xianggang, Yang Junna, Ding Yahong, Xue Jianyang, and Wang Xingguo investigates the eccentric compression behavior of square steel tube columns filled with basalt fiber reinforced recycled concrete. The study considers four variable parameters: recycled coarse aggregate replacement rate, basalt fiber content, recycled concrete strength grade, and eccentricity. Eight short column specimens were tested under static eccentric loading, with observations of failure processes, load-displacement curves, and load-strain curves. The study also establishes a finite element model and proposes a design calculation method for eccentric compression capacity.

Test Parameters and Key Results

Parameter Range / Values Effect on Peak Capacity
Recycled aggregate replacement rate Varied (0%, 50%, 100%) Decreases with increasing replacement rate
Basalt fiber content Varied (0%, 0.1%, 0.2%) Modest improvement in ductility
Concrete strength grade Varied (C30, C40, C50) Increases with higher strength grade
Eccentricity Varied (small to large) Decreases with increasing eccentricity

The test results show that all specimens exhibit elastic, elasto-plastic, and plastic-degradation stages. The load versus mid-height lateral deflection curves are similar in shape, with rapid increase in lateral deflection after peak load. The peak bearing capacity decreases with increasing replacement rate or eccentricity, and increases with higher core recycled concrete strength grade. The finite element model accurately simulates the full-range eccentric compression behavior.

Technical Interpretation and Material Considerations

The use of recycled concrete in steel tube columns is an environmentally sustainable approach, but the reduction in bearing capacity with increasing replacement rate must be accounted for in design. The recycled aggregate has lower strength and higher porosity compared to natural aggregate, which reduces the concrete's compressive strength and elastic modulus. The steel tube provides confinement that mitigates some of this reduction, but the overall capacity is still lower. Basalt fiber addition improves the ductility of the concrete core, which enhances the post-peak behavior of the column. The fibers bridge micro-cracks and prevent their propagation, leading to a more gradual strength degradation. However, the fibers have limited effect on the peak capacity, as the primary load-carrying mechanism is the combination of the steel tube and the concrete core. The concrete strength grade is a significant factor, with higher strength concrete providing greater peak capacity. The eccentricity reduces the capacity by inducing a bending moment that causes non-uniform stress distribution across the section.

Integration with Manufacturing and Quality Control

From a manufacturing perspective, the use of recycled concrete in steel tube columns introduces several challenges. The recycled aggregate must be properly processed to remove impurities and control the particle size distribution. The concrete mix design must be adjusted to account for the higher water absorption of the recycled aggregate, which can affect workability and strength. The basalt fibers must be uniformly dispersed in the concrete mix to avoid clumping and ensure consistent properties. In practice, we have seen cases where poor fiber dispersion leads to localized weakness and premature failure. The steel tube fabrication must follow the same quality standards as for conventional concrete-filled tubes, with strict control of dimensions, weld quality, and surface preparation. The inner surface of the tube should be clean and free of rust or oil to ensure adequate bond with the concrete. The concrete filling process must ensure complete filling and compaction, particularly in the corners of the square tube where air pockets can form. The use of self-compacting concrete can facilitate this, but the mix design must be optimized for the specific aggregate and fiber types.

Critical Reflection and Lessons Learned

The study highlights the potential of using recycled concrete in structural applications, but the reduction in capacity must be compensated by increased steel ratio or larger cross-sections. This increases the material cost, which may offset the environmental benefits. The basalt fiber addition is a promising approach to improve ductility, but the optimal fiber content must be determined based on the specific concrete mix and loading conditions. The finite element model provides a reliable tool for predicting the behavior, but it requires accurate input parameters, including the stress-strain relationship of the recycled concrete and the bond-slip behavior at the steel-concrete interface. In practice, we should calibrate the model with test data from the specific materials and geometry to ensure accuracy. The proposed design calculation method should be validated with additional test data and incorporated into design codes. The use of recycled concrete in steel tube columns is still relatively new, and the long-term behavior, including creep and shrinkage, needs to be investigated. The durability of the recycled concrete in the confined environment of the steel tube should also be studied, as the steel tube provides protection from external agents but may create a humid environment that affects the concrete.

Study Insights and Future Directions

This research contributes to the understanding of eccentric compression behavior of square steel tube basalt fiber recycled concrete short columns. The experimental data and finite element model provide a basis for design. The study also highlights the potential for sustainable construction using recycled materials. Future work should extend the experimental program to include larger specimens, different loading conditions, and long-term effects. The interaction between the basalt fibers and the recycled aggregate should be studied more thoroughly, including the effects of fiber length and content on the bond and cracking behavior. The use of other fiber types, such as steel fibers or polypropylene fibers, should also be investigated. From a practical standpoint, the industry would benefit from standardized test methods and design guidelines for recycled concrete filled steel tube columns. This would facilitate the wider adoption of this sustainable construction technology.