ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Statistical Analysis of 327 Concrete-Filled Steel Tube Arch Bridges

1. What This Paper Is Really About

This is a Fuzhou University study that compiles and analyses data on 327 concrete-filled steel tube (CFST) arch bridges with spans of 50 m or more, built up to June 2010. The paper provides a comprehensive statistical overview of the development trends, application fields, regional distribution, span ranges, construction methods, and structural parameters — including rise-to-span ratio, arch axis shape, arch rib cross-section, and transverse bracing.

This is not a technical analysis of a specific structural behaviour; it is a survey paper that gives the engineering community a snapshot of where CFST arch bridge technology stands. For someone in the steel pipe industry, this is a valuable reference because it tells you what kind of steel pipe products are being used, in what quantities, and with what specifications.

2. Key Findings and Their Engineering Significance

2.1 Development Trends and Application

The paper shows that CFST arch bridges have been increasingly used in China since the 1990s, with a peak in the 2000s. The main applications are highway bridges and urban bridges, with a smaller number of railway bridges. The regional distribution shows that the technology is most popular in the south and southwest of China — provinces like Sichuan, Guizhou, Yunnan, and Guangxi — where the terrain is mountainous and arch bridges are a natural choice.

2.2 Span Range and Construction Methods

The span range of the 327 bridges is analysed, showing that the majority have spans between 50 m and 200 m, with a smaller number in the 200-400 m range, and a few exceeding 400 m. The construction methods include:

2.3 Structural Parameters

The structural parameters are the most interesting part for a steel pipe manufacturer:

3. Practical Implications for Manufacturing and Construction

3.1 Steel Pipe Specifications

For a steel pipe manufacturer, the statistical analysis tells you what sizes and grades of pipe are in demand. The arch ribs are typically made from seamless or welded steel pipe with diameters ranging from 400 mm to 1,000 mm, and wall thicknesses from 10 mm to 30 mm. The steel grades are typically Q345, Q390, or Q420, with some bridges using higher strength steel for large spans.

The concrete filling is typically C40 or C50, and the concrete is pumped into the pipe after the arch is erected. The pumping process is critical — the concrete must be self-consolidating to ensure it fills the pipe completely without voids.

3.2 Fabrication of Arch Ribs

The fabrication of arch ribs is a major undertaking. The ribs are typically fabricated in segments, each segment being a straight or slightly curved pipe section, and then assembled on site. The welding of the segments is critical — the joints must be full penetration and NDT inspected. The curvature of the rib is achieved by either bending the pipe (for small radii) or by fabricating the rib from straight segments with angled joints (for large radii).

The dumbbell and truss forms are more complex to fabricate. A dumbbell rib consists of two parallel pipes connected by a web plate, which is welded to the pipes. A truss rib consists of multiple pipes connected by lattice members (diagonals and verticals). The welding of the lattice members to the main pipes is a high-volume, repetitive operation that requires careful control of weld quality and distortion.

3.3 Construction Methods and Steel Pipe Handling

The construction method has a significant impact on the steel pipe requirements. For swing (rotation) construction, the arch ribs are fabricated on temporary supports and then rotated into position. This requires the ribs to be strong enough to withstand the stresses during rotation, which means the steel pipe wall thickness may be increased for the temporary condition. For cable-stayed cantilever construction, the ribs are erected in segments and supported by temporary cables, which also imposes additional stresses.

4. Lessons Learned and Recommendations

4.1 For Designers

The statistical analysis provides a useful reference for preliminary design. The typical rise-to-span ratio of 1/5, the catenary or parabola axis shape, and the dumbbell or truss rib cross-sections are all well-established choices. For spans exceeding 200 m, the truss form is more common, and for spans exceeding 400 m, the truss form with a larger number of tubes is typically used.

4.2 For Fabricators

The fabrication of arch ribs requires a high level of precision. The curvature must be accurate, the weld quality must be high, and the distortion must be controlled. Use appropriate welding sequences and jigs to control distortion. For the dumbbell and truss forms, the welding of the web plates and lattice members to the main pipes requires careful fit-up and weld control.

4.3 For Site Engineers

The concrete filling is the most critical site operation. Use self-consolidating concrete, plan the pumping sequence to avoid voids, and verify the fill level using ultrasonic or other methods. The construction method — whether scaffolding, cantilever, swing, or cable-stayed — has a significant impact on the temporary stresses in the arch ribs, and these should be checked during construction.

5. Closing Thoughts

This is a valuable reference paper for anyone involved in the design, fabrication, or construction of CFST arch bridges. The statistical analysis provides a clear picture of the state of the art in China, and the structural parameters give practical guidance for preliminary design. For a steel pipe manufacturer, this paper is a reminder that the bridge market is a significant consumer of steel pipe, and that the specifications — diameter, wall thickness, steel grade — are driven by the bridge span and the structural form. The key takeaway is that CFST arch bridges are a mature technology with well-established design and construction practices, and the steel pipe industry should be prepared to meet the specific requirements of this application.