CFST Frame Composite Shear Walls under Different Axial Compression Ratios: Seismic Performance and Design Implications
1. Literature Overview and Research Context
The paper by Wang Min et al. (2008) from Beijing University of Technology presents an experimental study on the seismic performance of concrete-filled steel tube (CFST) frame composite shear walls under different axial compression ratios. The research addresses a critical issue in the design of high-rise buildings: the effect of axial compression ratio on the seismic behavior of composite shear walls.
The study involves two 1/4-scale models of CFST frame composite mid-high shear walls with a shear span ratio of 1.5. Model 1 had an axial compression ratio of 0.35, while Model 2 had an axial compression ratio of 0.65. The specimens were subjected to low-cycle reversed loading to investigate the effect of axial compression ratio on load capacity, ductility, hysteresis behavior, and energy dissipation.
2. Test Program and Key Findings
2.1 Specimen Configuration
The CFST frame composite shear wall consists of a reinforced concrete shear wall with CFST columns at the boundaries. This configuration combines the advantages of CFST columns (high axial load capacity, good ductility) with the lateral stiffness and strength of reinforced concrete shear walls.
| Parameter | Model 1 | Model 2 |
|---|---|---|
| Axial Compression Ratio | 0.35 | 0.65 |
| Shear Span Ratio | 1.5 | 1.5 |
| Scale | 1/4 | 1/4 |
| Boundary Elements | CFST Columns | CFST Columns |
| Wall Type | Reinforced Concrete | Reinforced Concrete |
2.2 Observed Behavior and Failure Modes
The test results revealed that both models exhibited good seismic performance, with stable hysteresis behavior and adequate energy dissipation capacity. However, the axial compression ratio significantly affected the behavior:
- Model 1 (n=0.35): Exhibited higher ductility and more stable hysteresis behavior, with a more gradual strength degradation after peak load.
- Model 2 (n=0.65): Exhibited higher load capacity but lower ductility, with a more rapid strength degradation after peak load.
The study also established a load capacity calculation model for CFST frame composite shear walls, which showed good agreement with the test results.
3. Technical Interpretation: The Effect of Axial Compression Ratio
3.1 Mechanism of Axial Compression Ratio Effects
The axial compression ratio is a critical parameter in the design of shear walls and columns. It represents the ratio of the applied axial load to the axial load capacity of the section. Higher axial compression ratios typically result in:
- Higher load capacity (up to a certain limit)
- Lower ductility
- More rapid strength degradation after peak load
- Reduced energy dissipation capacity
In CFST frame composite shear walls, the axial compression ratio affects both the CFST boundary columns and the reinforced concrete wall. The CFST columns provide confinement to the concrete core, which enhances the axial load capacity but also affects the ductility.
3.2 Interaction between CFST Columns and RC Wall
The composite action between the CFST boundary columns and the reinforced concrete wall is critical for the overall performance. The CFST columns provide:
- High axial load capacity
- Confinement to the concrete core
- Enhanced ductility
The reinforced concrete wall provides:
- Lateral stiffness
- In-plane shear strength
- Energy dissipation through concrete cracking
The axial compression ratio affects the relative contribution of these two components. At higher axial compression ratios, the CFST columns carry a larger proportion of the axial load, which may reduce the ductility of the overall system.
3.3 Hysteretic Behavior and Energy Dissipation
The hysteresis curves of both models were stable and exhibited a spindle shape, indicating good energy dissipation capacity. However, the higher axial compression ratio (Model 2) resulted in:
- Narrower hysteresis loops
- More rapid strength degradation
- Reduced cumulative energy dissipation
This is consistent with the general behavior of reinforced concrete and composite structures under high axial compression.
Zhuojin Pipe Fitting Co., Ltd