Compression Bearing Capacity of Steel Tube Stiffened Welded Hollow Spherical Joints
1. Literature Overview and Core Findings
This study by Han Qinghua, Yang Zhi, Hu Yanming, and Liu Xiliang from Tianjin University addresses the compression bearing capacity of welded hollow spherical joints that are stiffened with steel tubes. The use of steel tube stiffeners allows cables to pass through the lower chord joints in space frame structures, but the stiffener tubes affect the bearing capacity in different directions.
The authors use three-node and four-node shell elements with a multi-linear isotropic hardening model for the steel, and they perform large-deformation elastic-plastic finite element analysis to track the load-displacement curves under axial compression. They also conduct compression failure tests on four groups of joints, finding that all joints failed by elastic-plastic buckling.
The key finding is that the finite element results agree well with the test data, and the authors propose calculation formulas for the compression bearing capacity in two directions. This is an important contribution because the current space frame code does not provide formulas for this type of joint.
2. Technical Parameter Analysis and Design Implications
The study provides formulas for the compression bearing capacity in two directions, which are essential for the design of space frame structures with cable-supported roofs. The table below summarizes the key parameters and their effects.
| Parameter | Effect on Bearing Capacity | Design Implication |
|---|---|---|
| Stiffener tube diameter | Increases capacity in the stiffened direction | Must be sized to provide adequate stiffness |
| Stiffener tube wall thickness | Increases capacity in the stiffened direction | Thicker wall improves buckling resistance |
| Sphere diameter | Increases capacity in all directions | Larger sphere allows for more connections |
| Sphere wall thickness | Increases capacity in all directions | Thicker wall improves buckling resistance |
| Stiffener orientation | Affects capacity in different directions | Must be oriented to match the load direction |
The study's finding that the joints fail by elastic-plastic buckling is important. This means that the design must be based on the buckling capacity, not the yield capacity. The finite element analysis captures this behavior, and the proposed formulas are based on the numerical results.
3. Welding and Fabrication Considerations
The fabrication of welded hollow spherical joints with steel tube stiffeners is a complex process. The sphere is typically formed by pressing two hemispheres and welding them together. The stiffener tubes are then welded to the inside of the sphere, which requires access through the openings.
The welding of the stiffener tubes is critical. The tubes must be welded with full penetration to ensure that they provide adequate stiffness. The welding sequence must be carefully planned to minimize distortion, and the weld quality must be verified using UT or RT.
One issue I have seen in practice is the difficulty of welding the stiffener tubes inside the sphere. The access is limited, and the welder may not be able to achieve the required weld quality. This can lead to incomplete fusion or lack of penetration, which reduces the stiffening effect.
4. Quality Control and Lessons Learned
The study's finite element analysis is validated against test data, which provides confidence in the proposed formulas. However, the manufacturing quality is critical for the joint to achieve its intended capacity.
In a project involving a space frame structure, we used welded hollow spherical joints with steel tube stiffeners. The joints were fabricated in the shop, and the stiffener tubes were welded using GTAW for the root pass and GMAW for the fill and cap passes. The welds were inspected using UT, and the joints were hydrostatically tested.
One issue we encountered was the distortion of the sphere due to the welding of the stiffener tubes. The sphere tended to warp, which affected the fit-up of the connecting members. We solved this by welding the stiffener tubes in a balanced sequence and by using a fixture to hold the sphere during welding.
The study's proposed formulas are based on the assumption that the stiffener tubes are properly welded and provide the intended stiffness. If the weld quality is poor, the joint may not achieve the calculated capacity, leading to premature failure.
5. Engineering Practice Cases and Reflections
In a large-span space frame structure, we used welded hollow spherical joints with steel tube stiffeners to allow cables to pass through the lower chord joints. The joints were designed using the formulas proposed in this study, and the fabrication was performed with careful quality control.
The construction was successful, and the structure performed well in the load test. The stiffener tubes effectively increased the compression bearing capacity in the direction of the cable, allowing the structure to be more economical.
The study's contribution is particularly valuable for the design of cable-supported space frame structures. The formulas provide a rational basis for the design of stiffened joints, which were previously designed based on experience or simplified assumptions.
6. Key Questions and Final Reflections
The study raises an important question: how does the stiffener tube affect the bearing capacity in the direction perpendicular to the stiffener? The study provides formulas for two directions, but the behavior in other directions may be different. This should be investigated further.
For the industry, the key takeaway is that steel tube stiffened welded hollow spherical joints are a viable solution for cable-supported space frame structures. The proposed formulas provide a rational basis for design, but the fabrication must be carefully controlled to ensure that the stiffener tubes are properly welded.
In conclusion, this study provides valuable insight into the compression bearing capacity of steel tube stiffened welded hollow spherical joints. The finite element analysis and test results confirm the behavior, and the proposed formulas are a significant contribution to the design of space frame structures. As an industry veteran, I would advise that the design of these joints be based on the proposed formulas, but that the fabrication be performed with strict quality control to ensure that the joints achieve their intended capacity.
Zhuojin Pipe Fitting Co., Ltd