ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Mechanical Properties of Stainless Steel Lined Composite Pipes Prepared by SHS-Centrifugal Method

Literature Overview and Core Significance

The paper by Xi Wenjun and colleagues from the University of Science and Technology Beijing investigates the mechanical properties and thermal expansion behaviour of stainless steel lined composite pipes produced by the self-propagating high-temperature synthesis (SHS) centrifugal method. This is a fascinating and industrially relevant topic because it addresses a persistent problem in the process industries: how to combine the corrosion resistance of stainless steel with the strength and economy of carbon steel in a single pipe. The SHS-centrifugal method is a relatively novel approach that uses the exothermic reaction between metal powders to generate the stainless steel liner in situ, while the centrifugal force from the rotating pipe ensures the liner is deposited uniformly on the inner surface. The authors characterise the microstructure of the liner, identify the phases present, and relate them to the mechanical properties and thermal expansion behaviour. The results are important for understanding the service performance of these composite pipes, particularly in applications involving thermal cycling or mechanical loading.

Technical Points and Microstructural Analysis

The study focuses on a stainless steel liner with a composition of Cr13-14% and Ni14-16%, which is deposited onto a carbon steel substrate. The authors used scanning electron microscopy to examine the fracture surfaces of tensile specimens and transmission electron microscopy to characterise the microstructure of the stainless steel layer. The key finding is that the liner consists predominantly of columnar austenite grains, with thin layers of ferrite between the columnar grains. The ferrite regions contain AlNi intermetallic compound precipitates, and there is evidence of sigma phase precipitation at the austenite-ferrite phase boundaries.

Microstructural Feature Observed Characteristics Practical Implications
Columnar austenite grains Elongated grains perpendicular to the pipe surface Provides good strength in the hoop direction
Thin ferrite layers Between columnar austenite grains Improves weldability and reduces hot cracking
AlNi intermetallic precipitates In ferrite regions Increases hardness but may reduce ductility
Sigma phase At austenite-ferrite boundaries Embrittlement risk, especially at elevated temperatures

The presence of sigma phase is a particular concern. Sigma phase is a hard, brittle intermetallic compound that forms in stainless steels when they are exposed to temperatures in the range of 600-900°C for extended periods. In the SHS-centrifugal process, the liner is formed at very high temperatures, and the cooling rate determines whether sigma phase precipitates. The authors found evidence of sigma phase at the phase boundaries, which suggests that the cooling conditions during the SHS process may have been conducive to its formation. This has significant implications for the mechanical properties, particularly ductility and impact toughness, as sigma phase acts as a crack initiation site and reduces the material's ability to deform plastically.

Engineering Practice and Lessons Learned

The SHS-centrifugal method is an attractive manufacturing route for composite pipes because it produces a metallurgical bond between the liner and the substrate, which eliminates the risk of debonding that plagues mechanically lined pipes. However, the process also introduces specific challenges. The high temperatures involved can cause grain growth, phase transformations, and the formation of undesirable intermetallic phases. The thermal expansion mismatch between the stainless steel liner and the carbon steel substrate is another concern, as the authors note. Stainless steel has a higher coefficient of thermal expansion than carbon steel, which means that during thermal cycling, the liner will expand more than the substrate, potentially causing compressive stresses in the liner and tensile stresses at the interface. Over time, this can lead to fatigue cracking or debonding.

From a manufacturing perspective, the SHS-centrifugal process offers several advantages. It is relatively simple, requires no external heat source, and can produce pipes with a uniform liner thickness. The centrifugal force ensures that the liner is deposited evenly on the inner surface, and the reaction is self-sustaining, which makes the process energy-efficient. However, the process also requires careful control of the powder composition, particle size distribution, and centrifugal speed to achieve the desired liner properties. The authors' findings on the microstructure provide valuable guidance for optimising these parameters.

Study Insights and Practical Recommendations

The key insight from this paper is that the mechanical properties of the stainless steel liner are not determined solely by its composition but are strongly influenced by the microstructure, which in turn depends on the processing conditions. The columnar grain structure provides good strength in the hoop direction, which is beneficial for resisting internal pressure. However, the presence of ferrite layers and sigma phase precipitates can reduce ductility and impact toughness. For applications where the pipe will be subjected to dynamic loading or low temperatures, these microstructural features could be a concern.

For practical application, I would recommend the following. First, ensure that the liner composition is carefully controlled to achieve the desired balance of austenite and ferrite. A duplex microstructure with approximately 5-10% ferrite is often optimal for corrosion resistance and weldability. Second, control the cooling rate after the SHS reaction to minimise sigma phase precipitation. This may require post-weld heat treatment or a controlled cooling schedule. Third, characterise the mechanical properties of the liner using both tensile and impact testing, and verify the bond strength between the liner and the substrate. Finally, consider the thermal expansion mismatch when designing the pipe for service conditions. If the pipe will be subjected to significant thermal cycling, the liner thickness and the interface design must be carefully considered to avoid fatigue failure.

Conclusion and Outlook

The SHS-centrifugal method is a promising technology for producing stainless steel lined composite pipes, offering a metallurgical bond and a uniform liner thickness. However, the mechanical properties of the liner are sensitive to the microstructure, which is determined by the processing conditions. The presence of columnar austenite grains, thin ferrite layers, and sigma phase precipitates all influence the strength, ductility, and toughness of the liner. For successful application, the manufacturing process must be carefully controlled to achieve the desired microstructure and to minimise the formation of brittle intermetallic phases. Future research should focus on optimising the cooling schedule and exploring the use of post-treatment to improve the mechanical properties of the liner. This paper provides a solid foundation for that work and offers valuable insights for engineers involved in the production and application of composite pipes.