ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Axial Bearing Capacity of Circular Steel Tube Confined Steel-Reinforced Recycled Concrete Short Columns Based on Unified Strength Theory: Study Notes

1. Literature Overview and Core Findings

This paper by Ma Hui, Hu Guangbin, Li Zhe and Guo Tingting, published in Chinese Journal of Applied Mechanics (2017, Vol. 34, No. 6), presents axial compression tests on nine circular steel tube confined steel-reinforced recycled concrete (STSRC) short columns. The main variables were recycled coarse aggregate replacement ratio, diameter-to-thickness ratio, and steel reinforcement ratio. The authors then applied the unified strength theory to derive a theoretical formula for the axial ultimate bearing capacity. The test results show that the bearing capacity decreases as the recycled aggregate replacement ratio increases, and increases as the diameter-to-thickness ratio decreases and the steel reinforcement ratio increases. The columns exhibited high bearing capacity and good ductility. The theoretical calculation gave a mean ratio of calculated to experimental value of 0.99 with a variance of 0.001, which is excellent agreement.

2. Technical Interpretation and Unified Strength Theory Application

The unified strength theory is a powerful tool because it accounts for the difference between tensile and compressive strengths of the material through the parameter α, and for the intermediate principal stress effect through the parameter b. In this paper, the thick-walled cylinder unified strength theory was used to calculate the confining stress exerted by the steel tube on the core recycled concrete. The authors then derived the axial bearing capacity formula. From a pipe engineering standpoint, the thick-walled cylinder model is exactly what we use when we calculate the burst pressure of a pipe under internal pressure, but here it is applied in reverse — the external steel tube confines the concrete core. The key insight is that the confining stress is not uniform; it depends on the diameter-to-thickness ratio and the yield strength of the steel. The paper also found that for a given α, the bearing capacity increases with b; and for a given b with α ≠ 1, the capacity increases with α. This means that if the concrete has a lower tensile strength relative to its compressive strength, the confinement is less effective, which is a crucial point for recycled concrete because its tensile strength is often lower than that of normal concrete.

Parameter Range / Effect on Bearing Capacity
Recycled aggregate replacement ratio Increases → capacity decreases
Diameter-to-thickness ratio Decreases → capacity increases
Steel reinforcement ratio Increases → capacity increases
Material strength parameter b (0 ≤ b ≤ 1) Increases → capacity increases
Tensile-compressive ratio α (α ≠ 1) Increases → capacity increases
Recycled concrete strength Increases → capacity enhancement coefficient decreases

3. Engineering Practice and Production Considerations

In the steel pipe industry, we supply the circular tubes that form the outer shell of these composite columns. The diameter-to-thickness ratio is a direct function of the wall thickness we roll. A thinner wall gives a higher D/t ratio, which reduces the confinement efficiency and lowers the bearing capacity. This is a straightforward economic trade-off: a thicker wall costs more, but it improves the structural performance. The paper's finding that the capacity enhancement coefficient decreases with increasing recycled concrete strength is interesting — it means that for high-strength recycled concrete, the steel tube contributes relatively less, so the benefit of the composite action diminishes. This is a warning for designers who might assume that a high-strength concrete core always works well with a steel tube. From a manufacturing perspective, the surface condition of the tube interior matters for bond. If the tube is delivered with mill scale or oil, the bond between steel and concrete will be poor. I have seen cases where tubes were specified with a smooth interior and no surface preparation, and the composite action was compromised. For recycled concrete, the aggregate shape and texture also affect the interface, so the bond may be even more variable.

4. Critical Assessment and Future Direction

The theoretical formula based on unified strength theory is elegant and matches the test data well, but the test matrix is limited to nine specimens. The authors did not vary the steel grade, the concrete strength, or the length-to-diameter ratio, which are all important parameters. The diameter-to-thickness ratio range was also narrow. Before this formula can be used in design codes, it needs to be validated against a much larger database, including tests from other researchers. I would also note that the paper does not discuss the effect of welding on the tube. If the tube is welded longitudinally, the weld seam has different mechanical properties, and the confinement may be non-uniform around the circumference. This is a practical concern that the theoretical model does not capture. For engineers, I would recommend using the formula with a conservative safety factor, and always checking that the tube wall thickness is sufficient to avoid local buckling before the concrete reaches its peak stress. The paper is a valuable contribution to the understanding of recycled concrete composite columns, but it is a starting point, not a final design guide.