ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Application Prospects of Stainless Steel Tubes in Condensers in China

Literature Overview

This paper by Liang Lei, Zhou Guoding, Xie Qun, Yao Xiuping and Wu Yiping from Shanghai Institute of Electric Power, published in China Electric Power in 1998, provides a comprehensive analysis of the mechanical properties, corrosion resistance, heat transfer performance and economic performance of stainless steel tubes for use in power plant condensers. The paper also reviews the application status of stainless steel tubes in condensers both domestically and internationally. The authors conclude that stainless steel tubes have good technical and economic performance, and that their application prospects in Chinese condensers are very promising.

Key Technical Points

The paper's analysis of stainless steel tubes for condenser applications can be summarised in the following table, which I have compiled from the paper's data and my own knowledge of the industry.

Property Stainless Steel Tube Copper Alloy Tube (Traditional) Practical Observation
Mechanical strength Higher than copper alloys Lower Stainless steel tubes can be thinner for the same pressure rating
Corrosion resistance Excellent, especially in chloride-containing water Good, but susceptible to ammonia and sulfide attack Stainless steel is more resistant to pitting and crevice corrosion
Heat transfer performance Lower thermal conductivity than copper, but thinner walls compensate Higher thermal conductivity The overall heat transfer coefficient can be similar or better
Erosion resistance Excellent Good, but susceptible to erosion at high water velocities Stainless steel can operate at higher water velocities
Cost Higher initial cost Lower initial cost The life-cycle cost is often lower for stainless steel
Service life Longer (20-30 years or more) Shorter (10-15 years) Stainless steel reduces replacement and maintenance costs

The paper also discusses the application status of stainless steel tubes in condensers in the United States, Japan and Europe, where they have been used successfully for many years. The authors argue that the technical and economic performance of stainless steel tubes is superior to traditional copper alloy tubes, and that China should accelerate the adoption of this technology.

Integration with Engineering Practice

This paper, although published in 1998, is remarkably prescient. The application of stainless steel tubes in condensers has become increasingly common in China and around the world. From my experience in the industry, I have seen the following practical considerations arise:

  1. Material selection: The choice of stainless steel grade is critical. The paper discusses the use of austenitic stainless steels, such as 304 and 316, which are suitable for most condenser applications. However, for more aggressive cooling water, higher-grade materials such as duplex stainless steel or super austenitic stainless steel may be required.
  2. Tube manufacturing: Stainless steel tubes for condensers are typically manufactured using the welded process (ERW or HFW) or the seamless process. The welded process is more economical, but the weld quality must be carefully controlled to ensure corrosion resistance. The tube must be annealed and pickled to restore the corrosion resistance of the weld zone.
  3. Tube installation: The installation of stainless steel tubes in a condenser requires careful handling to avoid damage to the tube surface. The tubes must be expanded into the tube sheet using a controlled process to ensure a tight joint without over-expansion.
  4. Water chemistry: The performance of stainless steel tubes is highly dependent on the water chemistry. Chloride content, pH and dissolved oxygen levels must be carefully monitored to prevent pitting and crevice corrosion.
  5. Economic analysis: The paper's economic analysis is based on the life-cycle cost, which includes the initial cost, maintenance cost and replacement cost. The longer service life of stainless steel tubes often results in a lower life-cycle cost, despite the higher initial cost.

Study Insights and Reflections

This paper is a valuable reference for engineers involved in the design and operation of power plant condensers. The analysis of the technical and economic performance of stainless steel tubes is thorough and well-supported by data. The authors correctly identify that the application prospects for stainless steel tubes in Chinese condensers are very promising.

From my perspective as a veteran in the steel pipe industry, I can confirm that the use of stainless steel tubes in condensers has grown significantly since this paper was published. The technology has matured, and the manufacturing processes have improved. However, the fundamental principles discussed in the paper remain valid.

The key takeaway from this paper is that the selection of condenser tube material should be based on a life-cycle cost analysis, not just the initial cost. Stainless steel tubes offer superior corrosion resistance and a longer service life, which can result in significant cost savings over the life of the power plant. The paper provides a solid framework for this analysis.

In summary, this is a well-written and informative paper that provides a comprehensive overview of the application of stainless steel tubes in condensers. The technical and economic analysis is sound, and the conclusions are supported by the international experience. The paper is a valuable reference for engineers involved in the design, operation and maintenance of power plant condensers. The application prospects for stainless steel tubes in China are indeed very promising, and the industry should continue to accelerate the adoption of this technology.