ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Sunlight Temperature Field Analysis of Steel Tube-Expanded Concrete Pier Columns

Literature Overview and Core Findings

This paper by Ren Zhigang, Hu Shuguang, Ding Qingjun and Lü Linnü, published in the Journal of Wuhan University of Technology in 2008, addresses a problem that I have seen cause real headaches on site: the nonlinear temperature gradient that develops in a steel tube concrete pier column under sunlight. The authors used heat transfer theory combined with finite element analysis to calculate the temperature field in the cross-section of an ultra-high pier column under the combined action of solar radiation, convection and thermal radiation. They then carried out a parameter sensitivity analysis on the influence of meteorological parameters and the thermal parameters of the core concrete on the cross-section temperature distribution.

The key result is that under clear, cloudless weather conditions, a significant nonlinear temperature difference exists across the pier column cross-section, with the maximum positive temperature difference exceeding 17°C. More importantly, the solar radiation absorptivity of the pier column surface has the greatest influence on the cross-section temperature difference. For a steel tube concrete column, this matters enormously because the steel tube has a high thermal conductivity and a relatively low heat capacity, so it responds quickly to solar loading, while the concrete core lags behind.

Interpretation of Technical Points

The Three Heat Transfer Mechanisms

The paper correctly identifies the three modes of heat transfer that govern the temperature field in a steel tube concrete pier column under sunlight:

Heat Transfer Mode Physical Mechanism Relevance to Steel Tube Concrete
Solar radiation Direct and diffuse shortwave radiation absorbed by the surface Dominant during daytime; absorptivity of the steel surface is critical
Convection Heat exchange between the surface and ambient air Depends on wind speed, surface roughness and temperature difference
Thermal radiation Longwave radiation exchange between the surface and the sky/ground Important at night and during periods of low solar intensity

The Nonlinear Temperature Gradient

The finding of a maximum positive temperature difference exceeding 17°C is significant. In my experience with large-diameter steel pipe columns and concrete-filled steel tube structures, a temperature difference of this magnitude can induce thermal stresses that are not negligible in the design. For a pier column of, say, 1.5 m to 2.0 m diameter, a 17°C differential across the section can produce stresses on the order of several megapascals in the steel tube, and more importantly, it can cause differential expansion between the steel and the concrete, potentially leading to local debonding or microcracking at the interface if the bond is not adequate.

Parameter Sensitivity

The paper's conclusion that the solar radiation absorptivity of the surface has the greatest influence on the cross-section temperature difference is a practical insight. In the field, this means that the surface finish of the steel tube matters. A polished or light-coloured surface will have a lower absorptivity and thus a lower temperature gradient, while a dark, rough surface — such as one that has been exposed to weathering or has a dark paint coating — will absorb more solar radiation and develop a larger gradient.

Integration with Engineering Practice

Construction Quality Control

From a construction perspective, the temperature field analysis has direct implications for the timing of concrete placement and the curing regime. If the steel tube is exposed to direct sunlight during concrete placement, the steel surface can be significantly hotter than the ambient air, which can cause the concrete to set prematurely at the interface, leading to a weak bond or even voids. In practice, I have seen recommendations to either place concrete in the early morning or late afternoon when the steel surface temperature is closer to ambient, or to shade the steel tube during placement.

Thermal Cracking and Interface Behaviour

The nonlinear temperature gradient also matters for the long-term behaviour of the pier column. Repeated daily thermal cycling can lead to fatigue-like effects at the steel-concrete interface, particularly if there are any initial defects such as voids or poor bond. The paper's finding that the maximum temperature difference can exceed 17°C suggests that the thermal stress range in the steel tube could be on the order of 20 to 30 MPa, which is not negligible compared to the yield strength of typical structural steel.

Design Considerations

For the designer, the paper highlights the need to consider thermal loads in the design of steel tube concrete pier columns, particularly for those in regions with high solar radiation and large diurnal temperature swings. The current design codes often treat the temperature gradient in a simplified manner, but for ultra-high piers, the nonlinearity can be significant and should be accounted for in the detailed design.

Key Questions and Reflections

  1. The paper focuses on a specific pier column geometry and meteorological conditions. How would the results change for different diameters, wall thicknesses and concrete properties?
  2. The absorptivity of the steel surface is identified as the most influential parameter. What is the typical range of absorptivity for common steel surface finishes, and how does this vary with weathering and coating?
  3. The paper does not explicitly address the effect of the concrete's thermal properties on the temperature field. In practice, the moisture content of the concrete can significantly affect its thermal conductivity and specific heat. How should this be accounted for?

Study Insights and Implications

This paper provides a useful framework for understanding the thermal behaviour of steel tube concrete pier columns under sunlight. The key takeaway for the practising engineer is that the temperature gradient is not a minor consideration — it can exceed 17°C, which is significant enough to affect the design and construction of these structures. The practical implications for construction scheduling, surface treatment and curing are clear. I would recommend that any engineer involved in the design or construction of steel tube concrete pier columns in sunny climates review this paper and consider the thermal effects in their own work.

The paper also reminds me of a lesson from the field: we often focus on the structural loads — dead, live, wind, seismic — but we sometimes overlook the thermal loads that can be just as important for composite structures where two materials with different thermal properties are bonded together. The steel tube and the concrete core will always want to behave differently under temperature changes, and if we do not account for this, we risk creating problems that are expensive to fix later.