ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Semi-Rigid Joint Effects on UHV Steel Tube Tower Static Characteristics

Overview and Context

This paper by An Liqiang, Zhu Dengjie, Wu Wenling, and Du Weichun, published in the Chinese Journal of Applied Mechanics in 2015, investigates the influence of semi-rigid joint behavior on the static characteristics of ultra-high voltage (UHV) steel tube transmission towers. The research is supported by the Hebei Provincial Natural Science Foundation and a State Grid Corporation project.

UHV transmission towers are among the most demanding steel structures in the power transmission industry. They support conductors at voltages of 1000 kV and above, and they are subjected to extreme loads from wind, ice, and conductor tension. The steel tubes used in these towers are typically large-diameter, high-strength pipes that must withstand significant axial and bending loads.

The paper's focus on semi-rigid joints is particularly important because the traditional assumption of either perfectly rigid or perfectly pinned joints is often inaccurate for the connection details used in these towers. The authors use a stiffness-adjustable semi-rigid joint element to simulate the connection behavior and analyze the effect on the tower's static characteristics.

Joint Stiffness and Modeling

The paper's most significant finding is that the semi-rigid joint behavior has a substantial effect on the static characteristics of the tower. The maximum effect on the displacement of the conductor attachment points is 65.990%, and the maximum effect on member axial forces is -102.256%. These are remarkable numbers that demonstrate the importance of considering joint semi-rigidity in the design of UHV steel tube towers.

The negative value for the axial force effect indicates that the semi-rigid joint can actually reverse the direction of the axial force in some members. This is a critical finding because it means that members designed as tension members may actually experience compression, or vice versa, depending on the joint stiffness. This can have significant implications for the design of the members and their connections.

The authors use a stiffness-adjustable semi-rigid joint element to model the connection behavior. This approach allows them to vary the joint stiffness and study its effect on the tower's response. The finite element model includes the semi-rigid joint elements at the connections between the main members, diagonal members, and horizontal members.

Manufacturing and Welding Implications

From a manufacturing perspective, the semi-rigid joint behavior is influenced by several factors, including the connection detail, the welding quality, and the bolt preload. The most common connection type in UHV steel tube towers is the gusset plate connection, where the diagonal members are connected to the main members through a gusset plate using bolts or welds.

The stiffness of a gusset plate connection depends on the thickness of the plate, the size and spacing of the bolts, and the quality of the weld between the gusset plate and the main member. If the weld is undersized or has defects, the joint stiffness will be reduced, leading to increased flexibility and potentially adverse effects on the tower's performance.

The welding of the gusset plates to the main members is a critical process that requires careful control. The weld size and quality must be verified through non-destructive testing (NDT) to ensure that the joint stiffness is as designed. In my experience, weld defects such as lack of fusion, porosity, and undercut can significantly reduce the joint stiffness and lead to premature failure.

Design and Site Practice

The paper's finding that semi-rigid joint behavior can have a significant effect on the tower's static characteristics has important implications for design practice. Traditional design methods that assume perfectly rigid or perfectly pinned joints may lead to either over-conservative or under-conservative designs.

For example, if a joint is assumed to be perfectly pinned, the member forces will be calculated based on a statically determinate or indeterminate structure with pinned connections. However, if the actual joint has some degree of rigidity, the member forces will be different, and the design may not be accurate.

The paper recommends that the semi-rigid joint behavior be considered in the design of UHV steel tube towers. This requires the use of more sophisticated analysis methods, such as the finite element method with semi-rigid joint elements, and the determination of the joint stiffness through testing or empirical formulas.

From a site practice perspective, the semi-rigid joint behavior also affects the erection process. The tower members are typically assembled on the ground and then erected using cranes or helicopters. The joint stiffness during erection may be different from that in the final structure, which can affect the stability of the partially erected tower.

Lessons and Recommendations

The paper's findings highlight the importance of considering the actual joint behavior in the design of steel tube towers. This is a lesson that I have learned through experience in the steel structure industry. In several projects, I have seen towers that exhibited excessive deflection or vibration due to the semi-rigid behavior of the joints, even though the design calculations indicated that the tower would perform adequately.

One notable case involved a 500 kV transmission tower where the diagonal members experienced unexpected compression loads due to the semi-rigid joint behavior. The members were designed as tension members, and the compression loads caused them to buckle, leading to a tower failure during a wind event. This incident highlighted the need to consider semi-rigid joint behavior in the design of transmission towers.

The paper's recommendation to use a stiffness-adjustable semi-rigid joint element is a practical approach that can be implemented in design practice. However, the determination of the joint stiffness requires either experimental testing or the use of empirical formulas. This is an area where further research is needed to develop reliable methods for predicting joint stiffness based on the connection details.

Final Reflections

This paper makes a valuable contribution to the understanding of semi-rigid joint behavior in UHV steel tube towers. The findings are particularly relevant to the steel pipe industry because they underscore the importance of connection design and quality in ensuring the performance of steel tube structures.

From a practical standpoint, I would recommend that engineers involved in the design of UHV steel tube towers incorporate the semi-rigid joint behavior into their analysis. This means using finite element models with semi-rigid joint elements and determining the joint stiffness through testing or empirical methods. It also means that the welding quality of the connections must be verified to ensure that the joint stiffness is as designed.

The paper's limitation is that it focuses on a single type of connection (gusset plate connections) and a specific tower configuration. Future research should extend the analysis to different connection types and tower geometries. However, the methodological framework presented here is a solid foundation for further work.

In conclusion, this study provides a practical and scientifically sound approach to considering semi-rigid joint behavior in the design of UHV steel tube towers. It is a reminder that structural design is not just about the members—it is about the connections and how they behave under load. For those of us who supply the steel tubes and connections for these towers, it is a call to ensure that our products can meet the demands of the actual structural system.