Constitutive Relationship and Fracture Criteria for X90 Ultra-High Strength Gas Transmission Steel Pipe
Overview of the Study
This paper by Yang Fengping and colleagues from the China Petroleum Pipeline Research Institute presents a comprehensive study on the constitutive relationship and fracture criteria for X90 ultra-high strength gas transmission steel pipe. The work is particularly important because X90 is a relatively new grade, and there is limited data available on its mechanical behaviour under various loading conditions.
The study involved three main components. First, the authors conducted quasi-static tensile tests on five different notched round bar specimens to determine the effect of stress triaxiality on fracture strain. Second, they conducted tensile tests at different strain rates using both a conventional tensile testing machine and a Hopkinson bar apparatus to determine the strain rate sensitivity of the material. Third, they developed constitutive and failure models based on the Johnson-Cook approach and damage mechanics theory.
Key Technical Findings
The experimental results are presented in a clear and systematic manner. The key findings are summarised below.
| Test Condition | Key Observation | Engineering Significance |
|---|---|---|
| Notched round bar specimens | The stress triaxiality increased by 2.43 times due to the presence of the notch | The notch effect significantly increases the stress triaxiality, which reduces the fracture strain |
| Fracture strain | The fracture strain decreased by 29% due to the notch effect | Higher stress triaxiality leads to earlier fracture, which is a critical consideration for flaw assessment |
| Damage strain energy | The damage strain energy decreased by 71% due to the notch effect | The energy required to cause fracture is significantly reduced at high stress triaxiality |
| Strain rate effect | The strain rate had a relatively small effect on fracture strain, with a maximum difference of about 10% between quasi-static and high-speed conditions | The material is not highly strain rate sensitive, which simplifies the constitutive modelling |
| Constitutive model | A Johnson-Cook constitutive model was developed considering the strain rate effect | The model can be used to predict the material behaviour under various loading conditions |
| Failure model | A failure model was developed considering both strain rate and stress triaxiality | The model can be used to predict the onset of fracture in the material |
Practical Implications for the Shop Floor and Delivery Site
Now, let me speak as someone who has spent decades in the pipe industry and has seen the evolution from X70 to X80 and now to X90.
First, the X90 grade represents a significant step forward in pipeline technology. The higher strength allows for thinner wall pipes, which reduces the steel tonnage and the cost of the pipeline. However, the higher strength also brings challenges. The material is more susceptible to brittle fracture, and the weldability is more difficult. The heat-affected zone (HAZ) of the weld is a particular concern, as the high strength can lead to a hard and brittle HAZ that is susceptible to hydrogen-induced cracking.
Second, the fracture criteria developed in this paper are essential for the design of pipelines against fracture. In a high-pressure gas pipeline, a crack can propagate at high speed, and the material must have sufficient toughness to arrest the crack. The fracture strain and damage strain energy are key parameters in the assessment of crack initiation and propagation. The finding that the stress triaxiality has a significant effect on fracture strain is particularly important, as it means that the design must consider the local stress state at any potential flaw.
Third, the strain rate effect is relatively small, which is good news for the industry. It means that the material behaviour under quasi-static conditions can be used as a conservative approximation for dynamic conditions, which simplifies the design process. However, the 10% difference is not negligible, and for critical applications, the strain rate effect should be considered.
Critical Review and Study Insights
The authors have done a thorough job in characterising the material behaviour of X90 steel. The use of notched round bar specimens to vary the stress triaxiality is a well-established technique, and the results are consistent with what would be expected from the literature.
However, there are some limitations. The study is based on a single heat of X90 steel, and the results may not be representative of the full range of X90 products available on the market. The manufacturing process, including the rolling schedule and the heat treatment, can have a significant effect on the mechanical properties. In my experience, the properties of X90 steel can vary considerably between different mills, and even between different heats from the same mill.
Another point is that the study does not address the effect of hydrogen on the fracture behaviour. In a gas transmission pipeline, the gas may contain hydrogen, which can cause hydrogen embrittlement and reduce the fracture toughness. This is a critical issue for X90 steel, as the higher strength makes it more susceptible to hydrogen-induced cracking.
From a practical standpoint, the most important finding is the development of a fracture criterion based on the damage strain energy density. This is a more fundamental approach than the traditional Charpy impact energy, and it can be used to assess the fracture behaviour of the material under various loading conditions. The relationship between the fracture characteristic length and the stress triaxiality and specimen diameter is also valuable, as it provides a way to scale the fracture behaviour from laboratory specimens to full-scale pipe.
Conclusions and Outlook
This study provides a comprehensive characterisation of the constitutive relationship and fracture criteria for X90 ultra-high strength gas transmission steel pipe. The key findings are that the stress triaxiality has a significant effect on fracture strain and damage strain energy, while the strain rate has a relatively small effect. The developed constitutive and failure models can be used for the design of pipelines against fracture.
For the industry, the practical implications are clear. When designing a pipeline with X90 steel, the fracture criteria must be carefully considered, and the design must account for the local stress state at any potential flaw. The weldability of X90 steel is a critical concern, and the HAZ must be carefully controlled to avoid brittle fracture.
I would recommend that the industry move towards a more comprehensive characterisation of X90 steel, including the effect of hydrogen on fracture behaviour and the variability of properties between different heats and mills. The development of a standard test method for the fracture criteria of X90 steel would also be valuable, as it would allow for a more consistent assessment of the material across the industry.
Zhuojin Pipe Fitting Co., Ltd