ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Progressive Collapse Analysis of Concrete-Filled Steel Tube Planar Frame Substructure

Literature Overview and Core Viewpoint

This paper by Wang Jingxuan, Wang Wenda, and Li Huawei from Lanzhou University of Technology addresses a critical safety concern: the progressive collapse resistance of concrete-filled steel tube (CFST) planar frame structures. The study focuses on a two-span, three-column substructure, which represents the typical configuration where a vertical key column fails and the structure must redistribute loads through alternative load paths.

The research employs refined finite element analysis to examine the full collapse process under vertical load, identifying four distinct stages in the load-displacement curve: beam mechanism stage, transition mechanism stage, catenary mechanism stage, and failure stage. The parametric analysis reveals that the steel beam flange thickness and the steel tube steel ratio have the most significant influence on the structure's progressive collapse resistance.

Technical Points and Process Interpretation

The Four-Stage Collapse Mechanism

The four stages identified in the load-displacement curve are essential for understanding how CFST frames respond to column loss. In the beam mechanism stage, the structure resists collapse through flexural action of the beams. As the displacement increases, the transition mechanism stage occurs, where the flexural capacity is exhausted and the structure begins to rely on alternative load paths. The catenary mechanism stage represents the development of tensile membrane action in the beams, which provides significant additional resistance. Finally, the failure stage occurs when the catenary capacity is exceeded and the structure cannot sustain further deformation.

Parametric Sensitivity Analysis

The study identifies the steel beam flange thickness and the steel tube steel ratio as the most influential parameters on progressive collapse resistance. This is a crucial finding for design practice. The steel beam flange thickness directly affects the beam's flexural and catenary capacity, while the steel tube steel ratio determines the column's axial capacity and its ability to resist the additional forces imposed by the redistribution of loads.

The Role of the Steel Tube

The CFST column plays a dual role in progressive collapse resistance. First, it must maintain its axial capacity after the adjacent column fails, as the loads from the failed column are redistributed to the remaining columns. Second, the steel tube provides confinement to the concrete core, enhancing the column's ductility and allowing it to sustain large deformations without sudden failure. This ductility is critical in progressive collapse scenarios, where the structure must absorb significant energy through deformation.

Engineering Practice and Delivery Considerations

From a steel pipe manufacturing perspective, the steel tube used in CFST columns for progressive collapse resistance must have excellent ductility and toughness. The steel grade, wall thickness, and diameter-to-thickness ratio all affect the column's ability to deform without fracturing. In high-risk structures, such as those in seismic zones or with critical occupancy, the steel tube may need to meet additional toughness requirements, such as Charpy impact testing at specified temperatures.

The weld quality of the steel tube is also critical. In a progressive collapse scenario, the column is subjected to high axial loads and significant bending moments as the structure deforms. The welds in the steel tube must be able to sustain these loads without fracture. This is particularly important for welded steel tubes, where the weld seam is a potential weak point.

The connection between the steel beam and the CFST column is another critical element. The study focuses on the substructure behavior, but the connection design determines how effectively the beam can transfer loads to the column. In practice, we have seen connection failures in progressive collapse events, highlighting the importance of proper connection design and fabrication.

Key Questions and Reflections

The study uses a two-span, three-column substructure, which is a simplification of a real frame structure. How does the behavior change when the structure has more spans or when the failed column is at an edge or corner? The load redistribution path becomes more complex, and the catenary mechanism may not develop fully if the adjacent spans are not sufficiently long.

The parametric analysis considers geometric and physical parameters, but it does not address the effect of dynamic loading. In a real progressive collapse event, the column failure is sudden, and the structure is subjected to dynamic effects that can significantly amplify the response. The static analysis in this paper provides a conservative estimate, but the dynamic amplification factor should be considered in design.

The steel tube steel ratio is identified as a significant parameter, but the study does not explore the effect of different steel grades or concrete strengths. In practice, the choice of steel grade and concrete strength affects both the capacity and the ductility of the CFST column, which are both critical for progressive collapse resistance.

Study Insights and Implications

This paper provides valuable insights for the design of CFST frames against progressive collapse. The four-stage collapse mechanism provides a clear framework for understanding how the structure resists collapse, and the parametric analysis identifies the key design parameters. The finding that the steel beam flange thickness and the steel tube steel ratio are the most influential parameters suggests that designers should focus on these elements when assessing progressive collapse resistance.

For the steel pipe industry, this research reinforces the importance of supplying steel tubes with consistent, reliable properties. The steel tube's contribution to progressive collapse resistance depends on its ability to provide confinement to the concrete core and to sustain large deformations without fracture. This means that the steel tube must have excellent ductility, toughness, and weld quality.

The study also highlights the importance of the connection between the steel beam and the CFST column. While the paper focuses on the substructure behavior, the connection design is critical for ensuring that the load transfer mechanism works as intended. In practice, we have seen connection failures in progressive collapse events, and the design and fabrication of these connections require careful attention.

Conclusion

The progressive collapse analysis of CFST planar frame substructures provides critical insights into how these structures resist column loss. The four-stage collapse mechanism—beam mechanism, transition mechanism, catenary mechanism, and failure—offers a clear framework for understanding the structural response. The parametric analysis identifies the steel beam flange thickness and the steel tube steel ratio as the most influential design parameters, providing guidance for engineers designing progressive collapse-resistant structures. For the steel pipe industry, this research emphasizes the importance of supplying high-quality steel tubes with excellent ductility, toughness, and weld quality, as these properties directly influence the structure's ability to resist catastrophic collapse. The findings also underscore the need for careful connection design and fabrication, as the connections are critical to the load redistribution mechanism.