ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Creep Effects in Concrete-Filled Steel Tube Arch Bridges: A Practical Review

Literature Overview and Core Findings

The paper by Wu Wenjie, Wang Yuanfeng, and Ma Yishuo from Beijing Jiaotong University addresses a question that has troubled bridge engineers for decades: how does creep in the concrete core affect the long-term behavior of concrete-filled steel tube (CFST) arch bridges, and does the analysis method matter enough to change the design? The authors used the B3 model for concrete creep, the age-adjusted effective modulus method for structural creep analysis, and a finite element model that incorporates geometric nonlinearity through the co-rotational method. They also simulated the staged construction process using birth-death element techniques. The numerical analysis was applied to a large-span mid-supported CFST arch bridge. The key finding is that when geometric nonlinearity and construction sequence are considered together with creep, the arch rib deflection and steel tube stress change by less than 10%, but the concrete core stress can change by as much as 50%. The authors conclude that for large-span CFST arch bridges, the coupling effect of geometric nonlinearity and construction process with creep must be considered.

Interpretation of Technical Points

From my years on the plant floor and on delivery sites, I read this paper with particular interest because it touches on a fundamental issue that is often underestimated: the steel tube and the concrete core do not behave as one material, and the interface between them is where the real engineering decisions are made. The B3 model is a sophisticated creep model that accounts for the composition of the concrete, its curing history, and the ambient humidity. The age-adjusted effective modulus method is a practical way to handle the time-dependent stiffness of concrete in a structural analysis. The co-rotational method is a technique for handling large displacements in a finite element framework, which is essential for slender arch structures. The birth-death element technique allows the analyst to activate elements as they are constructed, which simulates the real sequence of erecting the steel tube, welding it, and then pumping concrete into it. The 50% change in concrete stress is a significant number. In practice, this means that if you design a CFST arch bridge using a simple elastic analysis that ignores creep and construction sequence, you might underestimate the concrete stress by a factor of two, which could lead to cracking or even crushing of the concrete core over the life of the bridge. The steel tube stress change of less than 10% is reassuring, but it does not mean the steel is not affected—it means the steel is less sensitive to the creep coupling because the steel tube carries a smaller portion of the long-term load in a well-designed CFST section.

Integration with Engineering Practice

In my experience with CFST arch bridges, the construction sequence is often the most critical factor in determining the final stress state. The typical sequence is to erect the steel tube arch first, then pump concrete into the tube from the base to the crown, and finally install the deck and the hangers. The concrete pumping process is a delicate operation because the concrete must be able to flow through the entire tube without segregation, and the pumping pressure must be controlled to avoid bursting the tube. The paper's finding that the construction process affects the concrete stress by up to 50% highlights the need for careful monitoring during concrete pumping. If the concrete is pumped too fast, the tube can bulge or even burst at the base, which is a catastrophic failure. If the concrete is pumped too slowly, the concrete may set before it reaches the crown, leaving a void that will later cause stress concentration and corrosion. The geometric nonlinearity is also important because a large-span arch is a slender structure that can deflect significantly under load, and this deflection changes the internal force distribution. The co-rotational method captures this effect, and the paper shows that it matters for the concrete stress even if it does not matter much for the steel stress. This is a subtle but important distinction: the steel tube is stiff and strong, so it does not see a large change in stress, but the concrete core is softer and more brittle, so it is more sensitive to the nonlinear behavior of the structure.

Key Questions and Reflections

One question that this paper raises in my mind is whether the B3 model is appropriate for all types of concrete used in CFST bridges. The B3 model was developed for ordinary Portland cement concrete, but many CFST bridges use high-performance concrete with admixtures, fly ash, or silica fume. These materials have different creep behavior, and the B3 model may not capture their time-dependent deformation accurately. In my experience, the creep of high-performance concrete can be significantly lower than that of ordinary concrete, but the difference depends on the mix design and the curing conditions. Another question is whether the 50% change in concrete stress is a design concern or merely an analysis concern. If the design code requires a certain safety factor for the concrete, then a 50% increase in stress might be acceptable if the design was conservative. However, if the design was optimized to the limit, then the 50% increase could push the concrete into the nonlinear range, leading to cracking and a reduction in the composite action between the steel and the concrete. The paper does not provide a direct answer to this question, but it does provide a clear warning that the analysis method matters.

Study Insights and Implications

The practical implication of this paper for the steel pipe industry is that the steel tube in a CFST arch bridge is not just a formwork for the concrete—it is a structural member that must be designed with the same care as any other steel structure. The tube must have sufficient wall thickness to resist the pumping pressure, the welding must be of high quality to avoid leaks, and the steel must have the right mechanical properties to work in composite with the concrete. In my experience, the most common problem with CFST bridges is not the steel tube itself but the interface between the steel and the concrete. If the concrete shrinks away from the steel tube, the composite action is lost, and the steel tube must carry the entire load alone, which can lead to premature buckling. The paper's emphasis on the coupling between creep, geometric nonlinearity, and construction sequence is a reminder that the interface behavior is time-dependent and must be analyzed with care. For the pipe manufacturer, this means that the quality of the steel tube, including its dimensional accuracy, surface condition, and weld quality, is critical to the long-term performance of the bridge. A tube with a poor weld or a rough surface may not bond well with the concrete, and this can lead to a loss of composite action over time. In conclusion, this paper is a valuable contribution to the understanding of CFST arch bridge behavior, and it provides a clear message to engineers: the analysis method matters, and the construction sequence matters, and both must be considered together with creep to get a realistic picture of the long-term performance of the bridge. The steel pipe industry should take note of this finding and ensure that the tubes supplied for CFST bridges are manufactured to the highest standards, because the tube is the backbone of the composite structure and its quality determines the safety and durability of the bridge.