ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Development of Steel Pipe Prestressed Cable Anti-Collision Movable Guardrail

Introduction and Safety Requirements

This paper, authored by Yan Shuming and Bai Shufeng from Beijing Zhongluan Traffic Technology Co., Ltd., published in the Journal of Traffic and Transportation Engineering in 2010, documents the development of a novel movable anti-collision guardrail using a combination of steel pipes and prestressed cables. The research was funded by the Zhongguancun Science Park Small Enterprise Innovation Support Fund and the Technology Innovation Fund for Small and Medium-sized Enterprises.

Movable guardrails are essential components of highway safety infrastructure, particularly in areas where traffic lanes need to be temporarily closed or diverted, such as at toll stations, accident sites, or construction zones. These guardrails must be able to withstand vehicle impacts while being movable enough to allow for flexible lane management.

The safety requirements for these guardrails are stringent, as they must protect both vehicle occupants and workers in the vicinity. The paper establishes the collision test conditions and safety evaluation criteria, which are critical for ensuring that the guardrail meets the required performance standards.

Structural Design and Finite Element Analysis

The guardrail design combines steel pipes with prestressed cables in a novel configuration. The steel pipes provide the primary structural resistance, while the prestressed cables provide additional energy absorption and maintain the guardrail's shape after impact.

Design Element Function
Steel pipes Primary structural resistance
Prestressed cables Energy absorption and shape retention
Connection details Load transfer between pipes and cables
Foundation/anchor Fixing the guardrail to the ground

The finite element model was developed using LS-DYNA explicit finite element analysis, which is the industry standard for simulating vehicle impacts. The model was carefully calibrated to represent the actual guardrail geometry, material properties, and boundary conditions.

The use of prestressed cables is an innovative approach that offers several advantages over conventional guardrails. The prestressing force allows the guardrail to maintain its shape after impact, reducing the need for repair or replacement. Additionally, the cables can be tensioned to different levels to optimize the energy absorption characteristics.

Full-Scale Collision Test Results

The paper reports the results of full-scale collision tests using real vehicles, which is the most reliable method for evaluating guardrail performance. The tests were conducted according to the established collision conditions, with both small and large vehicles impacting the guardrail at specified speeds and angles.

Test Parameter Small Vehicle Large Vehicle
Impact energy 160 kJ 160 kJ
Maximum dynamic displacement (test) 972 mm 1093 mm
Maximum dynamic displacement (simulation) 913 mm 1100 mm
Exit angle (test) 10.2° 0°
Exit angle (simulation) 9.1° 0°

The test results show that the guardrail achieves an impact energy of 160 kJ, which is a significant energy absorption capacity. The maximum dynamic displacements of 972 mm and 1093 mm for small and large vehicles, respectively, are within acceptable limits for guardrail performance.

The exit angles are particularly important for safety. A small exit angle of 10.2° for the small vehicle indicates that the vehicle is redirected with minimal deviation from its original path, which is desirable for preventing secondary collisions. The exit angle of 0° for the large vehicle suggests that the vehicle is stopped or redirected without significant lateral displacement.

The comparison between test and simulation results shows good agreement, with differences of approximately 6% for the small vehicle displacement and 0.6% for the large vehicle displacement. This validates the finite element model and provides confidence in the simulation results for additional scenarios.

Manufacturing and Installation Challenges

From a manufacturing perspective, the development of this guardrail presents several challenges that must be addressed to ensure consistent quality and performance.

Manufacturing Aspect Challenge Solution
Steel pipe fabrication Precise dimensions and weld quality Tight tolerances and NDT
Prestressed cable tensioning Consistent tensioning force Calibrated tensioning equipment
Connection details Reliable load transfer High-quality welds and bolts
Surface treatment Corrosion resistance Galvanizing or coating
Quality control Consistent performance Batch testing and inspection

The prestressed cables must be tensioned to a precise force to ensure that the guardrail performs as designed. Over-tensioning can cause excessive stiffness and reduced energy absorption, while under-tensioning can result in excessive deformation and potential failure.

The steel pipes used in the guardrail must be manufactured to high standards, with particular attention to the weld quality and dimensional accuracy. Any defects in the pipes, such as lack of fusion or wall thickness variations, can compromise the structural integrity of the guardrail.

Performance Evaluation and Conclusions

The full-scale collision tests demonstrate that the steel pipe prestressed cable guardrail meets the safety evaluation criteria, with an impact energy of 160 kJ and acceptable dynamic displacements. The vehicle exit angles are within acceptable limits, ensuring that vehicles are safely redirected after impact.

The finite element model provides a reliable tool for further optimization and evaluation of the guardrail design. The good agreement between simulation and test results suggests that the model can be used to explore additional impact scenarios, such as different vehicle types, speeds, and angles.

From a practical standpoint, the development of this guardrail represents a significant advancement in highway safety infrastructure. The combination of steel pipes and prestressed cables offers a robust and reliable solution that can withstand high-energy impacts while maintaining its shape and functionality.

In conclusion, this paper provides a comprehensive account of the development, testing, and evaluation of a novel steel pipe prestressed cable anti-collision movable guardrail. The results demonstrate that the guardrail meets the required safety standards and is suitable for deployment in highway applications. The finite element model provides a valuable tool for future optimization and adaptation to different impact scenarios.