ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Construction Control of a 202m Span CFST Tied-Arch Bridge

What the Paper Really Says

Pan Shengshan and his colleagues from Dalian University of Technology have documented the construction control of the Dandong Moon Island Bridge, a 202-meter span through-tied arch bridge. The bridge is notable for its narrow width-to-span ratio of 1/22.44, which makes it a very slender and flexible structure. The arch ribs are a single-plane truss of X-shape, and the tie is provided by steel strands tensioned within the bridge deck. The paper focuses on the calculation methods used for construction control and the key issues that arose during construction, leading to a proposed construction scheme.

Core Findings and Their Engineering Significance

The paper highlights the importance of a well-planned construction sequence for a CFST arch bridge. The key issues are the erection of the arch ribs, the casting of the concrete in the steel tubes, and the tensioning of the tie strands. The authors emphasize that the construction control must account for the geometric nonlinearity of the slender arch, the temperature effects, and the time-dependent behavior of the concrete. The narrow width-to-span ratio makes the bridge prone to lateral instability, which is a major concern during construction. The proposed scheme involves a careful sequence of erecting the arch, pumping the concrete, and tensioning the ties in stages to ensure the internal forces and the geometry remain within acceptable limits.

Construction Stage Key Control Parameter Typical Issue Mitigation Strategy
Arch rib erection Lateral displacement, member stress Wind-induced vibration, instability Temporary lateral bracing, monitoring of displacement
Concrete pumping Pumping pressure, tube stress Blockage, excessive tube expansion Controlled pumping rate, pressure monitoring, vibration
Tie tensioning Strand force, deck elevation Uneven tensioning, deck cracking Staged tensioning, simultaneous jacking, monitoring
Final adjustment Arch geometry, deck profile Temperature-induced variation Adjustment at dawn, temperature compensation

Plant Floor and Site Reality

This is a project that I would love to have been involved in. The construction of a 202-meter CFST arch bridge is a major undertaking, and the construction control is critical to the success of the project. The steel tubes for the arch ribs are typically fabricated in segments, which are then welded together on site. The welding of the field joints is a critical quality issue. I have seen cases where the field welds were not properly inspected, leading to defects that were only discovered during the concrete pumping, when the tube is subjected to high internal pressure. The concrete pumping process is also a critical step. The concrete must be of a high fluidity to ensure it fills the entire tube, but it must also have a low shrinkage to avoid debonding from the steel. The paper does not go into detail on the concrete mix design, but this is a key factor in the success of the project.

Standards and Judgment

The paper does not reference specific design codes, but the construction control is typically governed by the requirements of the relevant bridge design code, such as JTG D62 in China or AASHTO in the United States. The key judgment call is the allowable tolerance for the arch geometry and the internal forces. For a slender arch, the tolerance must be tighter than for a conventional bridge. The paper proposes a construction scheme that includes a monitoring system to track the displacement and stress at key points. In practice, I would recommend a comprehensive monitoring plan that includes strain gauges on the steel tubes, displacement transducers on the arch, and temperature sensors. The data from these sensors should be used to update the construction control model in real-time.

Key Questions and Reflections

The paper is a case study, and it provides valuable insights into the construction control of a specific bridge. However, it does not provide a general framework that can be applied to other bridges. Each bridge has its own unique characteristics, and the construction control plan must be tailored to the specific geometry, loading, and site conditions. The paper also does not discuss the potential for instability during construction in detail. For a narrow bridge, the lateral stability of the arch is a major concern, and the construction sequence must be designed to minimize the risk. The use of temporary lateral bracing is essential, but the design of this bracing is not covered in the paper.

Lessons and Outlook

This study is a valuable reference for engineers involved in the construction of CFST arch bridges. The key takeaway is that construction control is not just about monitoring, but about a well-planned sequence of operations that accounts for the nonlinear behavior of the structure. The paper's proposed scheme is a good starting point, but it should be adapted to the specific conditions of each project. For the plant and site engineer, the main lesson is that the quality of the steel tube fabrication and the field welding is paramount. The concrete pumping process must be carefully controlled to avoid damage to the steel tube. The next step for the research community should be to develop a standardized approach to construction control that can be used for a range of bridge types. This would be a significant contribution to the field.