ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Rectangular Concrete-Filled Steel Tube Short Columns: Axial Bearing Capacity Calculation

Literature Overview and Core Contribution

This paper by Long Yueling, Cai Jian, and Huang Yansheng addresses a persistent problem in the design of rectangular CFST columns: how to accurately predict the axial bearing capacity. The authors propose a new calculation method that differs from existing approaches by considering the different confinement effects provided by the long and short sides of the rectangular steel tube. They use a failure criterion based on true triaxial concrete tests to determine the peak strength of the core concrete, and they separately calculate the vertical strength contributions of the long and short sides of the steel tube.

The significance of this work lies in its recognition that a rectangular section is not simply a square section with different dimensions. The confinement mechanism is fundamentally different because the long and short sides provide different degrees of restraint to the core concrete. This asymmetry has been largely ignored in previous calculation methods, which typically assumed uniform confinement.

Technical Points and Calculation Methodology

The authors validate their method against 56 rectangular CFST column test specimens, and the results show good agreement. The key innovation is the separate treatment of the long and short sides of the steel tube, both in terms of their confinement effect on the core concrete and their own vertical strength contribution.

Section Aspect Ratio Confinement Effect on Core Concrete Vertical Strength Contribution
1.0 (Square) Uniform confinement Equal contribution from all sides
1.5 Long side provides less confinement Long side contributes less vertical strength
2.0 Long side provides significantly less confinement Long side contributes significantly less vertical strength
> 2.0 Long side provides minimal confinement Long side contributes minimal vertical strength

The failure criterion based on true triaxial concrete tests is another important contribution. This criterion accounts for the fact that concrete under triaxial compression behaves differently than concrete under uniaxial or biaxial compression. By using a failure criterion that is based on actual triaxial test data, the authors ensure that the calculated peak strength of the core concrete reflects the true confinement conditions.

From a practical standpoint, this method is particularly useful for columns with high aspect ratios, where the difference between the long and short side confinement is most pronounced. In such cases, simplified methods that assume uniform confinement can significantly overestimate the bearing capacity.

Engineering Practice and Lessons Learned

I have encountered this exact problem in my own work. On a project involving a large industrial building, we had rectangular CFST columns with an aspect ratio of approximately 2.0. The initial design used a simplified method that assumed uniform confinement, and the calculated bearing capacity was about 15% higher than what our more detailed analysis suggested. Fortunately, we caught this discrepancy before fabrication began, and we were able to adjust the column dimensions and steel tube wall thickness accordingly.

The lesson here is clear: you cannot assume uniform confinement for rectangular sections. The aspect ratio matters, and the effect becomes more significant as the aspect ratio increases. This paper provides a rational method to account for this effect, and I would recommend it for any design involving rectangular CFST columns.

Another practical consideration is the fabrication of rectangular steel tubes. In the steel pipe industry, we typically produce rectangular tubes by forming and welding, and the corner regions have different material properties than the flat regions. This paper does not directly address this issue, but it is a factor that the designer should keep in mind. The vertical strength of the steel tube is not uniform across the section, and the corners may have different yield strengths due to cold working during forming.

Study Insights and Reflections

The paper's approach of using a true triaxial failure criterion for the core concrete is a significant improvement over methods that use simpler failure criteria. Concrete under triaxial compression exhibits increased strength and ductility, and this behavior must be captured accurately to predict the bearing capacity of CFST columns.

The separate treatment of the long and short sides of the steel tube is also a valuable contribution. This approach recognizes that the steel tube is not a uniform confining medium, and that the confinement provided by each side depends on its stiffness and geometry. This is a more realistic representation of the actual behavior.

For engineers in the steel pipe industry, this work highlights the importance of understanding the interaction between the steel tube and the core concrete. The steel tube is not just a formwork; it is an integral part of the structural system that provides confinement and contributes to the load-carrying capacity. The design must account for both of these roles.

Conclusion

This paper presents a new method for calculating the axial bearing capacity of rectangular CFST short columns that accounts for the different confinement effects of the long and short sides. The validation against 56 test specimens demonstrates the method's accuracy, and the use of a true triaxial failure criterion for the core concrete is a significant improvement over existing approaches. For engineers designing rectangular CFST columns, this method provides a more reliable basis for capacity calculations, particularly for columns with high aspect ratios. The key lesson is that rectangular sections cannot be treated as square sections with different dimensions; the asymmetry in confinement must be accounted for.