ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Elastic and Elastic-Plastic Buckling Analysis of Concrete-Filled Steel Tube

Literature Overview and Research Context

This paper by Guo Lanhui and Zhang Sumei from Harbin Institute of Technology, in collaboration with Kim Wha-Jung from Kyungpook National University, investigates the elastic and elastic-plastic buckling behavior of square steel tubes filled with concrete. The study uses the finite strip method to analyze the critical buckling stress of the steel plate under uniform compression and stress gradient conditions, considering the effect of residual stresses.

The buckling behavior of concrete-filled steel tubes (CFST) is a fundamental issue in the design of these composite structures. The steel tube provides lateral confinement to the concrete core, but the steel plate itself can buckle locally if the width-to-thickness ratio is too high. Understanding the critical buckling stress is essential for determining the local buckling capacity and the overall performance of the CFST column.

Elastic Buckling Analysis and Critical Width-to-Thickness Ratio

The study reveals a critical finding regarding the effect of concrete filling on the buckling behavior of the steel plate. When the relative width-to-thickness ratio is below 30, the concrete filling does not improve the buckling capacity of the steel tube. However, when the width-to-thickness ratio exceeds 30, the concrete filling provides increasing improvement, with the maximum enhancement reaching 2.58 times the capacity of the empty steel tube.

Relative Width-to-Thickness Ratio Effect of Concrete Filling Maximum Capacity Enhancement
< 30 No significant improvement -
> 30 Increasing improvement 2.58 times empty tube capacity

This finding has significant implications for the design of CFST columns. For sections with low width-to-thickness ratios, the steel plate is relatively thick compared to the width, and the local buckling is not a critical issue. The concrete filling provides minimal benefit for preventing local buckling. However, for sections with high width-to-thickness ratios, the steel plate is relatively thin, and local buckling is a significant concern. The concrete filling effectively prevents the inward buckling of the steel plate, significantly improving the buckling capacity.

The critical width-to-thickness ratio of 30 is an important design parameter. Below this value, the steel plate is sufficiently thick to resist local buckling without the support of the concrete core. Above this value, the concrete core provides essential support to prevent local buckling. This is consistent with the general design philosophy for CFST columns, where the width-to-thickness ratio is limited to ensure that local buckling does not occur before the full plastic capacity is reached.

Effect of Stress Gradient and Residual Stresses

The study also investigates the effect of stress gradient on the critical buckling stress. When the steel plate is subjected to a stress gradient (e.g., due to bending), the critical buckling stress is higher than under uniform compression. This is because the stress gradient creates a stabilizing effect, with the higher stress regions being supported by the lower stress regions.

The effect of residual stresses is also examined. The study finds that residual stresses reduce the critical buckling stress in both the elastic and elastic-plastic regions. The higher the residual stress, the lower the critical buckling stress. This is a significant finding because residual stresses are present in all steel tubes due to the manufacturing process.

Residual Stress Level Effect on Critical Buckling Stress
Low Minimal reduction
Medium Moderate reduction
High Significant reduction

The residual stresses in steel tubes are typically introduced during the forming and welding processes. For welded tubes, the residual stresses can be significant, especially in the heat-affected zone. For seamless tubes, the residual stresses are generally lower but can still be present due to the manufacturing process.

Practical Implications for Manufacturing and Design

The findings of this study have direct implications for the manufacturing and design of CFST columns. From a manufacturing perspective, the control of residual stresses is important for ensuring the predicted buckling capacity is achieved. The residual stresses in welded tubes can be reduced through post-weld heat treatment or stress-relieving processes. However, these processes add cost and time to the manufacturing cycle.

The critical width-to-thickness ratio of 30 provides a practical design guideline. For square steel tubes with width-to-thickness ratios below 30, the concrete filling provides minimal benefit for preventing local buckling. This means that the steel tube can be designed based on its own buckling capacity, without relying on the concrete core for support. For width-to-thickness ratios above 30, the concrete core provides significant support, and the design can take advantage of this enhancement.

In my experience with CFST columns, the width-to-thickness ratio is a critical design parameter. For typical structural applications, the width-to-thickness ratio is usually in the range of 20-40. The findings of this study suggest that for ratios below 30, the concrete filling does not significantly improve the local buckling capacity, which means that the steel tube should be designed to resist local buckling on its own. For ratios above 30, the concrete filling provides significant enhancement, and the design can be optimized accordingly.

Reflections and Engineering Practice

The study provides a solid theoretical foundation for understanding the buckling behavior of concrete-filled square steel tubes. The finite strip method is an efficient and accurate approach for this type of analysis. The findings regarding the critical width-to-thickness ratio and the effect of residual stresses are particularly valuable.

From a practical perspective, the control of residual stresses in the manufacturing process is essential for achieving the predicted buckling capacity. The residual stresses in welded tubes can be significant, and the effect on buckling capacity should be considered in the design. The use of stress-relieving processes can reduce the residual stresses, but these processes add cost and time.

The finding that the concrete filling provides significant enhancement for width-to-thickness ratios above 30 is important for design optimization. This means that for thin-walled steel tubes, the concrete core provides essential support to prevent local buckling. The design can take advantage of this enhancement, allowing for more slender steel tubes and reduced material costs.

However, I would caution that the study is based on the finite strip method, which is a simplified analysis approach. The actual behavior of CFST columns may be more complex, especially under combined loading and in the presence of imperfections. The findings should be verified through experimental testing and more detailed finite element analysis.

The effect of residual stresses on the critical buckling stress is a significant consideration for design. In practice, the residual stresses in welded tubes can be reduced through post-weld heat treatment, but this is not always feasible or economical. The design should account for the presence of residual stresses, and the critical buckling stress should be determined conservatively.

In conclusion, this paper provides valuable insights into the elastic and elastic-plastic buckling behavior of concrete-filled square steel tubes. The critical width-to-thickness ratio of 30 and the effect of residual stresses are important design parameters. The findings are directly applicable to the design and manufacturing of CFST columns, and they provide a solid foundation for further research and development.