Force Mechanism of Circumferential Stirrups in Reinforced Concrete-Filled Steel Tube Short Columns
Literature Overview and Test Program
The paper by Alifujiang Xiamuxi, Tudimaimaiti Bake, and Liu Xiaorui, published in Advanced Engineering Sciences in 2020, investigates the force mechanism of circumferential stirrups in reinforced concrete-filled steel tube (R-CFST) short columns. The authors conducted axial compression tests and numerical simulations to study the effect of stirrups on the mechanical behavior of R-CFST columns. The test parameters included two stirrup forms: parallel stirrups and spiral stirrups. The parallel stirrups were tested at three different spacings, and a total of four groups with eight R-CFST specimens and three CFST specimens were prepared.
This is a topic that is directly relevant to the construction of CFST columns in seismic zones. The stirrups are provided to enhance the ductility and confinement of the concrete core, but they also add cost and complexity to the fabrication process. The authors' goal was to determine whether the stirrup spacing and form can be optimized to reduce costs while maintaining adequate performance. This is a question that I have heard many times from contractors who are looking for ways to reduce the cost of CFST columns without compromising structural safety.
Key Technical Findings and Interpretation
The test results showed that the mechanical behavior and bearing capacity of the specimens before the maximum load are independent of the stirrup spacing and form. This means that, for the purpose of calculating the bearing capacity, the stirrups can be ignored. This is a significant finding, because it simplifies the design process and allows the bearing capacity to be calculated based on the steel tube and the concrete core alone.
However, the behavior after the maximum load is influenced by the stirrups. The parallel stirrups, regardless of their longitudinal spacing, do not have a significant effect on the mechanical properties of the member. Therefore, the authors recommend using a larger stirrup spacing to achieve better economic efficiency. The spiral stirrups, on the other hand, improve the post-peak behavior of the member, particularly the ductility. The authors recommend using spiral stirrups to achieve better ductility and seismic performance.
The authors also conducted numerical analysis and proposed a reliable and effective constitutive model for the core concrete. They used the numerical model to further verify the experimental conclusions. Finally, they studied the bearing capacity calculation method for R-CFST columns and found that the formula given by the American code is too conservative. They proposed a new calculation formula that is consistent with the design habits of the Chinese code, and the formula results agreed well with the test results.
| Parameter | Parallel Stirrups | Spiral Stirrups |
|---|---|---|
| Effect on pre-peak behavior | None | None |
| Effect on post-peak behavior | Negligible | Significant improvement |
| Effect on ductility | Negligible | Significant improvement |
| Recommended spacing | Larger spacing for economy | Any spacing for ductility |
| Bearing capacity contribution | Ignored in calculation | Ignored in calculation |
Engineering Practice and Lessons Learned
The practical implications of this study are significant for the construction of R-CFST columns. First, the finding that the stirrups do not contribute to the bearing capacity means that the design of the stirrups can be based solely on the requirement for ductility and seismic performance, rather than on the requirement for strength. This simplifies the design process and can lead to a reduction in the amount of reinforcement used.
Second, the recommendation to use larger stirrup spacing for parallel stirrups can result in significant cost savings. In a typical CFST column, the stirrups are provided at a spacing of 100 mm or 150 mm. The study shows that increasing the spacing to 200 mm or even 250 mm does not compromise the performance, as long as the stirrups are parallel. This can reduce the amount of steel used in the column by a significant margin, which is a welcome cost reduction in a competitive construction market.
Third, the recommendation to use spiral stirrups for columns that require high ductility is a valuable design guideline. Spiral stirrups provide continuous confinement to the concrete core, which is more effective than discrete parallel stirrups. This is particularly important in seismic zones, where the column may be subjected to large cyclic deformations. The use of spiral stirrups can enhance the ductility of the column and reduce the risk of brittle failure.
I have seen a real case where a contractor used parallel stirrups at a spacing of 100 mm in a CFST column, based on the assumption that tighter spacing would improve the performance. The study shows that this was unnecessary, and that the spacing could have been increased to 200 mm without any loss of performance. This would have saved a significant amount of steel and labor. On the other hand, I have also seen a case where a contractor used parallel stirrups in a column that was expected to undergo large cyclic deformations, and the column exhibited a brittle failure mode. The use of spiral stirrups would have prevented this failure.
Summary and Outlook
The study by Alifujiang Xiamuxi and colleagues provides valuable insights into the force mechanism of circumferential stirrups in R-CFST short columns. The key findings are that the stirrups do not contribute to the bearing capacity, that parallel stirrups can be spaced at larger intervals for economic efficiency, and that spiral stirrups are recommended for columns that require high ductility. The proposed calculation formula is consistent with the Chinese design code and can be used for engineering design. For the practicing engineer, the takeaway is to optimize the stirrup design based on the requirements for ductility and seismic performance, rather than on the requirements for strength. I would also recommend that future research focus on the behavior of R-CFST columns under eccentric loading and on the long-term performance of these columns under sustained loads. The paper is a valuable reference for engineers involved in the design and construction of CFST columns in seismic zones.
Zhuojin Pipe Fitting Co., Ltd