ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Calculation Temperature Values for Dumbbell-Shaped CFST Arches: A Practical Review and Regional Recommendations

Literature Overview and Research Context

The paper by Huang Fuyun, Chen Baochun, and Ke Tingxian from Fuzhou University investigates the calculation temperature values for dumbbell-shaped concrete-filled steel tube (CFST) arches. Using a finite element method validated against field measurements from an actual bridge, the authors analysed the closure temperature, effective temperature, and average temperature internal forces for a dumbbell-shaped rib arch. They found that the closure temperature should be based on the average air temperature 28 days after concrete pouring and the dumbbell chord tube diameter. They also provided recommended maximum and minimum effective temperatures for different regions in Fujian Province and discussed the provisions of the JTG D60-2004 code.

This topic is of direct relevance to my work in steel pipe manufacturing for arch bridges. The dumbbell-shaped CFST arch, with two parallel chord tubes connected by webs, is a common configuration for long-span arch bridges. The temperature effects on such structures are significant because the steel tube and concrete core have different thermal expansion coefficients, and the composite action between them creates complex internal stress distributions.

From my experience supplying steel pipe for CFST arch bridges, temperature effects are often underestimated. The closure temperature—the temperature at which the arch is closed and the structural system becomes statically determinate—is critical for determining the initial stress state. If the closure temperature is incorrectly specified, the arch may develop excessive tensile or compressive stresses during service.

Core Technical Points and Temperature Analysis

The paper's key contribution is the identification of factors that influence the calculation closure temperature and effective temperature for dumbbell-shaped CFST arches.

Temperature Parameter Key Influencing Factors Recommended Approach
Closure Temperature Average air temperature 28 days after concrete pouring; dumbbell chord tube diameter Use 28-day average temperature plus correction for tube diameter
Maximum Effective Temperature Local maximum air temperature Use local maximum air temperature
Minimum Effective Temperature Local minimum daily average temperature Use local minimum daily average temperature
Average Temperature Internal Forces Temperature differential between steel and concrete; restraint conditions Calculate based on effective temperature range

The paper's finding that the closure temperature should consider the 28-day average air temperature is significant. This is because the concrete core reaches a significant portion of its final strength and stiffness within 28 days, and the composite action between steel and concrete develops during this period. If the closure temperature is based on the temperature at the time of closure, it may not account for the temperature changes that occur during the first 28 days as the concrete cures.

The effect of dumbbell chord tube diameter on closure temperature is also important. Larger diameter tubes have more concrete, which generates more heat during hydration, leading to higher internal temperatures. This heat can cause the steel tube to expand, affecting the closure temperature.

The paper provides recommended maximum and minimum effective temperatures for different regions in Fujian Province. These recommendations are based on local climate data and are useful for design. However, they may not be directly applicable to other regions with different climates.

Integration with Engineering Practice and Design Code Implications

The paper's discussion of the JTG D60-2004 code provisions is particularly relevant for Chinese bridge design practice. The code provides temperature values that may not be appropriate for all regions and all bridge types. The paper suggests that the code's provisions should be revised to account for regional climate variations and the specific characteristics of CFST arches.

From a manufacturing standpoint, the temperature effects on CFST arches have implications for the steel pipe specification. The steel tube must be able to withstand the temperature-induced stresses without yielding or buckling. This may require higher strength steel or thicker walls in regions with large temperature variations.

The paper's findings also have implications for the construction process. The closure temperature should be carefully controlled during construction. If the closure is performed at a temperature that is significantly different from the recommended value, the arch may develop excessive stresses. In my experience, the closure temperature is often specified in the construction documents, but it is not always strictly followed, leading to potential problems.

Key Questions and Reflections

The paper raises an important question: should the closure temperature be based on the ambient air temperature or the temperature of the steel tube itself? The steel tube temperature may differ from the ambient temperature due to solar radiation and other effects. The paper's approach of using the average air temperature 28 days after concrete pouring is a simplification, but it may not capture the actual steel temperature.

Another question concerns the effective temperature range. The paper recommends using the local maximum and minimum air temperatures, but the actual temperature of the structure may be higher or lower due to solar radiation and other effects. The effective temperature should account for these effects, but the paper does not provide a detailed method for doing so.

The paper's focus on Fujian Province is appropriate for the specific case study, but the findings may not be directly applicable to other regions. The recommended temperature values should be validated for other regions before being used in design.

Study Insights and Implications

This paper provides valuable insight into the temperature effects on dumbbell-shaped CFST arches. The identification of factors influencing closure temperature and effective temperature is useful for design, and the recommended temperature values for Fujian Province are directly applicable to bridges in that region.

For engineers in the steel pipe industry, the key takeaway is that temperature effects are critical for CFST arch design and must be carefully considered. The closure temperature should be specified based on the 28-day average air temperature and the tube diameter, and the effective temperature range should be based on local climate data.

The paper also highlights the need for revision of the JTG D60-2004 code provisions. The current code does not adequately account for regional climate variations or the specific characteristics of CFST arches. The industry should work toward updating the code to reflect the latest research findings.

Reference Value and Outlook

For engineers designing CFST arch bridges, this paper is a valuable reference for determining calculation temperature values. The recommended approach for closure temperature and effective temperature can be used directly in design, and the discussion of the code provisions highlights areas for improvement.

Looking forward, the industry should conduct more research on temperature effects in CFST arches, particularly on the actual temperature distribution within the steel tube and concrete core. The paper uses a finite element method validated against field measurements, but more field data would improve the accuracy of the recommendations.

In summary, this paper makes a significant contribution to the understanding of temperature effects in dumbbell-shaped CFST arches. The findings provide practical guidance for design and construction, and the discussion of code provisions highlights the need for revision. As someone who has supplied steel pipe for numerous CFST arch bridges, I see this paper as a valuable reference for ensuring the safety and serviceability of these structures under temperature variations. The lessons learned are directly applicable to bridge design and construction practice.