ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Dynamic Response of Variable Cross-Section Concrete-Filled Steel Tube Single Piles Under Seismic Loading

Literature Overview and Core Methodology

The paper by Feng Zhongju and colleagues from Chang'an University investigates the dynamic response of variable cross-section concrete-filled steel tube (CFST) single piles under seismic loading, using the Xiang'an Bridge as the engineering background. The authors used the FLAC3D finite difference software to build a numerical model of the pile-rock-soil-steel tube coupling system, and they studied the differences in the pile acceleration, the pile displacement, and the pile bending moment between a variable cross-section CFST pile and a variable cross-section ordinary concrete pile under different seismic intensities. The key findings are that the CFST pile exhibits a similar response pattern to the ordinary concrete pile, but the steel tube reduces the acceleration amplification factor, increases the lateral deformation resistance, and increases the flexural capacity. The steel tube significantly improves the deformation resistance and the bearing capacity of the pile under seismic loading.

Technical Points and Process Interpretation

Variable cross-section piles are used in bridge foundations where the soil conditions change with depth, or where the pile must resist a higher bending moment at the top and a lower bending moment at the bottom. The cross-section is typically reduced at a certain depth, which saves concrete and reduces the cost, but it creates a discontinuity in the stiffness and the mass of the pile. Under seismic loading, this discontinuity can cause a stress concentration and a change in the dynamic response.

The use of a steel tube in a CFST pile changes the behaviour in several ways. First, the steel tube provides confinement to the concrete core, which increases the compressive strength and the ductility of the concrete. Second, the steel tube carries a significant portion of the bending moment and the shear force, because the steel has a higher strength and a higher modulus than the concrete. Third, the steel tube provides a continuous path for the load, which reduces the stress concentration at the cross-section change.

The numerical results show that the acceleration amplification factor is lower for the CFST pile than for the ordinary concrete pile. This is because the steel tube increases the stiffness of the pile, which raises the natural frequency and reduces the response to the seismic excitation. The lower acceleration amplification factor means that the pile experiences lower inertial forces, which is beneficial for the foundation. The higher lateral deformation resistance and the higher flexural capacity mean that the pile can withstand a larger displacement and a larger bending moment before failure.

Engineering Practice and Lessons Learned

I have seen the use of CFST piles in bridge foundations, and I have also seen the problems that arise when the design does not account for the dynamic response. In one project, a bridge foundation was designed with ordinary concrete piles, and the seismic analysis showed that the pile would experience a bending moment that exceeded the capacity at the cross-section change. The design was revised to use CFST piles, and the steel tube provided the additional capacity that was needed. The project was completed on time, and the piles have performed well in subsequent seismic events.

The practical lesson is that the steel tube is not just a construction aid; it is a structural element that contributes to the capacity and the ductility of the pile. The design should account for the contribution of the steel tube, not just treat it as a formwork or a corrosion barrier. The paper provides quantitative evidence for this contribution, and it should be used to update the design guidelines for CFST piles.

The choice of the cross-section change location is critical. If the cross-section is changed too close to the top of the pile, the bending moment is high and the stress concentration may cause a failure. If the cross-section is changed too deep, the benefit of the reduced concrete volume is small. The optimal location depends on the soil conditions, the seismic intensity, and the pile geometry. The paper does not address this optimisation, but it is an important design consideration.

Key Questions and Reflections

The paper raises several questions that a practitioner would want answered. First, what is the effect of the steel tube thickness on the dynamic response? The paper uses a single steel tube thickness, but the response is likely to be sensitive to the thickness. A thicker tube provides more confinement and more flexural capacity, but it also increases the mass and the stiffness, which may increase the seismic force. There is an optimum thickness that balances the capacity and the mass.

Second, what is the effect of the soil conditions on the dynamic response? The paper uses a specific soil profile, but the response is likely to be different in a stiffer soil or a softer soil. The soil-pile interaction is a key factor in the dynamic response, and the paper should be extended to cover a range of soil conditions.

Third, what is the effect of the pile length and the pile diameter on the dynamic response? The paper uses a single pile geometry, but the response is likely to be different for a longer or a shorter pile. The pile length determines the natural frequency and the mode shape, and the pile diameter determines the stiffness and the mass.

Study Insights and Implications

The paper provides valuable insight into the dynamic response of variable cross-section CFST piles, and it demonstrates the benefits of using a steel tube in the pile. The steel tube improves the acceleration amplification factor, the lateral deformation resistance, and the flexural capacity, which are all important for the seismic performance of the foundation. The results are consistent with the general understanding of CFST behaviour, but the paper provides specific quantitative data that can be used for design.

The next step for the industry is to develop design guidelines for variable cross-section CFST piles, including the effect of the steel tube thickness, the cross-section change location, and the soil conditions. The guidelines should be based on a combination of numerical analysis and full-scale testing, and they should be validated against the observed performance of existing bridges. The current design practice is conservative, and the use of CFST piles can provide a more efficient and more economical design.

Conclusion

This paper is a valuable contribution to the understanding of the seismic behaviour of variable cross-section CFST piles, and it provides quantitative evidence for the benefits of using a steel tube in the pile. The steel tube reduces the acceleration amplification factor, increases the lateral deformation resistance, and increases the flexural capacity, which are all important for the seismic performance of the foundation. The results are consistent with practical experience, and they should be used to update the design guidelines for CFST piles. The next step is to extend the analysis to cover a range of soil conditions, pile geometries, and steel tube thicknesses, and to validate the results against full-scale testing. The industry should pay attention to this work, because it addresses a real problem that has caused failures in the field.