ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Construction Stability and Cable Wind Influence Analysis of Concrete-Filled Steel Tube Arch Bridges

Literature Overview and Core Findings

This paper by Li Yuanbing, Zhang Qiwei and Li Yadong, published in the Journal of Highway and Transportation Research and Development in 2009, addresses the construction stability of concrete-filled steel tube (CFST) arch bridges and the influence of cable wind on the stability of the arch rib during construction. The authors compared and summarised material nonlinear analysis methods for CFST arch bridges, and using a practical engineering example, employed a fibre element model to investigate the influence of material nonlinearity on the construction stability of the arch bridge. They also quantitatively analysed the beneficial effect of cable wind on the stability of the arch rib during construction and the setting of cable wind.

The key results are:

Interpretation of Technical Points

Material Nonlinearity and Stability

The paper highlights the importance of material nonlinearity in the stability analysis of CFST arch bridges. For large-span arch bridges, the material nonlinearity of the concrete and steel can significantly reduce the stability safety factor. The finding that the influence can exceed 50% is significant and indicates that linear elastic analysis is not sufficient for the stability assessment of large-span CFST arch bridges.

Fibre Element Model

The fibre element model is a powerful tool for the nonlinear analysis of composite structures. It divides the cross-section into a number of fibres, each with its own material properties, and integrates the stresses over the cross-section to obtain the section forces. This allows the model to capture the nonlinear behaviour of the concrete and steel, including cracking, crushing and yielding.

Cable Wind and Construction Stability

Cable wind is a temporary support system used during the construction of arch bridges to stabilise the arch rib. The paper shows that cable wind can significantly improve the stability of the arch rib, and that the reasonable layout is near the arch waist and arch crown. This is because these are the locations where the arch rib is most susceptible to instability.

The finding that the initial tension of the cable wind has no obvious effect on improving the stability is interesting. This suggests that the primary role of the cable wind is to provide lateral support to the arch rib, rather than to apply a specific pre-tension. The cable wind acts as a lateral restraint, preventing the arch rib from buckling out of plane.

Stability Safety Factor

The paper's recommendation that the stability safety factor should be combined with the instability mode and calculated based on the effects of the actual loads is a practical insight. The traditional stability safety factor is defined as the ratio of the critical load to the applied load, but this can be misleading if the instability mode is not considered. For example, a structure may have a high stability safety factor for one instability mode but a low one for another.

Integration with Engineering Practice

Construction Planning and Monitoring

From a construction perspective, the paper has direct implications for the planning and monitoring of CFST arch bridge construction. The stability of the arch rib during construction is critical, and the cable wind system must be properly designed and installed to ensure stability. The paper provides guidance on the layout of the cable wind, which should be near the arch waist and arch crown.

The Importance of Nonlinear Analysis

The paper also highlights the importance of nonlinear analysis in the design and construction of large-span CFST arch bridges. Linear elastic analysis is not sufficient, and the engineer must account for the material nonlinearity of the concrete and steel. This is particularly important for the construction phase, where the arch rib is not yet fully connected and the loads are different from the final state.

The Role of Cable Wind

The cable wind system is a temporary structure, but it plays a critical role in ensuring the stability of the arch rib during construction. The paper shows that the cable wind can significantly improve the stability, and that the initial tension is not the key parameter. This means that the engineer should focus on the layout and stiffness of the cable wind, rather than the initial tension.

Key Questions and Reflections

  1. The paper considers material nonlinearity, but what about geometric nonlinearity? For large-span arch bridges, geometric nonlinearity can also be significant. How should this be accounted for?
  2. The paper uses a fibre element model. How accurate is this model for CFST arch bridges, and what are the limitations?
  3. The paper focuses on the construction phase. How does the stability of the arch rib change after the concrete is filled and the bridge is completed?

Study Insights and Implications

This paper provides valuable insights into the construction stability of CFST arch bridges. The finding that material nonlinearity can reduce the stability safety factor by more than 50% is a wake-up call for engineers who rely on linear elastic analysis. The paper also provides practical guidance on the layout of cable wind, which is essential for the safe construction of these bridges.

From a practical perspective, the paper reinforces the importance of careful construction planning and monitoring. The stability of the arch rib during construction is critical, and the cable wind system must be properly designed and installed. I have seen cases where the cable wind was not properly installed, leading to instability of the arch rib and significant delays. The paper's guidance on the layout of the cable wind is a valuable practical contribution.

The paper also reminds me of the importance of understanding the behaviour of structures under construction loads. The loads during construction are different from the final loads, and the structure may be more susceptible to instability. The engineer must carefully analyse the construction phase and ensure that the structure is stable at all times.