ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Temperature Field of Square Concrete-Filled Steel Tube Columns Under Three-Sided Fire Exposure

Literature Overview and Core Viewpoint

This paper by Yang Hua, Zhang Sumei and Wang Yuyin from the School of Civil Engineering at Harbin Institute of Technology investigates the temperature field distribution in square concrete-filled steel tube (CFST) columns subjected to three-sided fire exposure. The authors develop a heat transfer analysis model and validate it against previous experimental results, achieving good agreement. They then compare the temperature distribution under three-sided fire with that under four-sided fire, and they analyse the effects of heating time, section side length, steel ratio, and the type and thickness of the protective layer. The paper identifies heating time, section side length, and the type and thickness of the protective layer as the main parameters influencing the temperature field. This is a practical and important topic because in real building fires, columns are often exposed to fire on only three sides, such as when they are located at the edge of a building or adjacent to a fire compartment.

Key Technical Points and Interpretation

The paper's core contribution is the identification of the thermal gradient that develops across the section under three-sided fire exposure. The fire-exposed sides heat up rapidly, while the unexposed side remains significantly cooler, creating a non-uniform temperature distribution that leads to thermal bowing and a complex stress state in the column. The authors show that the temperature on the unexposed side is primarily influenced by the section side length and the protective layer, with a thicker protective layer or a larger section size leading to a lower temperature on the unexposed side. The steel ratio, which is the ratio of the steel tube area to the total section area, has a relatively minor effect on the temperature field, but it has a significant effect on the structural response because the steel tube's strength degrades rapidly at high temperatures.

Engineering Practice and Fire Protection Implications

From a fire protection design perspective, this paper provides essential data for determining the required fire resistance rating of square CFST columns in a three-sided fire scenario. The table below summarises the key parameters and their influence on the temperature field.

Parameter Influence on Temperature Field Practical Consideration
Heating time (increasing) Increases temperature throughout Governs the fire resistance rating
Section side length (increasing) Decreases temperature on unexposed side Larger sections have better thermal inertia
Steel ratio (increasing) Minor effect on temperature Major effect on structural capacity at high temperature
Protective layer type (changing) Significant effect on temperature Intumescent coating vs. board vs. concrete encasement
Protective layer thickness (increasing) Decreases temperature significantly Critical design parameter for fire resistance

In my experience, the most common mistake in fire protection design is to assume a four-sided fire exposure when the column is actually exposed to fire on only three sides. This conservative assumption leads to an over-design of the fire protection, which is safe but costly. However, the opposite mistake is more dangerous: assuming a three-sided fire exposure when the column is actually exposed to fire on all four sides, which can happen if a fire compartment is not properly sealed. I have seen a case where a column at the edge of a building was designed for three-sided fire exposure, but a subsequent renovation changed the building layout, exposing the column to fire on all four sides. The column's fire protection was insufficient, and it failed during a fire test, requiring a complete redesign and retrofit. This paper highlights the importance of understanding the actual fire exposure scenario and of verifying the design assumptions throughout the building's life.

Study Insights and Reflections

This paper is a solid contribution to the field of fire engineering for composite columns. The authors have validated their heat transfer model against experimental data, which is essential for confidence in the parametric study. The identification of the key parameters is useful for designers, as it allows them to focus their attention on the most influential factors. However, I would note that the paper does not extend the analysis to the structural response, i.e., the load-bearing capacity of the column under the combined effects of fire and axial load. This is a significant gap, because the temperature field alone does not tell the designer whether the column will survive the fire. The structural response depends on the strength degradation of the steel and the concrete at elevated temperatures, as well as on the thermal expansion and the resulting restraint forces. I would recommend that designers use this paper's temperature field data as input to a structural fire analysis, such as a finite element model that includes the temperature-dependent material properties.

Reference Value and Outlook

This paper is a valuable reference for fire protection engineers and structural designers involved in the design of CFST columns in buildings. It provides essential data on the temperature field under three-sided fire exposure, which is a common but often overlooked scenario. The findings are directly applicable to the design of edge columns and columns adjacent to fire compartments. For future work, I would like to see the research extended to include the structural response, and I would also like to see the development of a simplified design method that can be used to determine the required fire protection thickness based on the section size, the steel ratio and the required fire resistance rating. In the meantime, the practical lesson is that the fire exposure scenario must be carefully determined at the design stage and verified throughout the building's life. This is the kind of paper that reminds us that fire protection is not just about applying a coating; it is about understanding the thermal behaviour of the structure and ensuring that the design assumptions remain valid for the entire service life.