Progressive Collapse Resistance of Concrete-Filled Steel Tube Composite Frames with Full Infill Walls: A Practical Review
Overview of the Study
Wang Jingxuan, Yang Yong, and Sun Yanhao, from Lanzhou University of Technology, published this work in China Civil Engineering Journal in 2022. The paper addresses a critical gap in progressive collapse design: the contribution of non-structural elements, specifically infill walls, to the resistance of a structure against progressive collapse. The authors conducted a monotonic vertical static loading test on a full-scale substructure of a concrete-filled steel tube (CFST) column-profiled steel sheet composite beam frame with full infill walls, after removing the middle column. They compared the results with a previous test on a similar frame without infill walls, and then developed a refined finite element model using ABAQUS/Implicit to study the effect of different wall opening ratios.
The study's key finding is that the load-displacement relationship of the structure can be divided into four stages: elastic, elastic-plastic, crack development, and failure. The infill walls increase the progressive collapse resistance of the frame but reduce its ductility. This is a nuanced conclusion that has significant implications for both design practice and construction sequencing.
Core Technical Points and Interpretation
The four-stage load-displacement relationship is a valuable framework for understanding the behavior of a composite frame under column removal. In the elastic stage, the structure behaves linearly, and the infill walls contribute to the initial stiffness. In the elastic-plastic stage, the steel beams begin to yield, and the infill walls start to crack. The crack development stage is characterized by a gradual loss of stiffness as the walls continue to crack and the beams develop plastic hinges. The failure stage is marked by a sudden drop in load capacity, typically due to fracture of the beam-to-column connection or crushing of the concrete.
The infill walls contribute to progressive collapse resistance through two mechanisms. First, they act as diagonal struts, transferring load from the beam above the removed column to the adjacent columns. This is known as the "strut action" of the infill wall. Second, they provide lateral restraint to the beams, which enhances the development of the catenary action mechanism. The catenary action is the primary mechanism for resisting progressive collapse after the beam mechanism is exhausted, and it relies on the axial tension capacity of the beams and the ability of the connections to transfer this tension.
| Stage | Load-Displacement Behavior | Infill Wall Contribution | Failure Mode |
|---|---|---|---|
| Elastic | Linear, high initial stiffness | Walls act as diagonal struts, increasing stiffness | No visible damage |
| Elastic-Plastic | Nonlinear, stiffness decreases | Walls crack, strut action weakens | Beam yielding, wall cracking |
| Crack Development | Significant stiffness loss, load continues to increase | Walls provide lateral restraint, enhancing catenary action | Wall crushing, beam plastic hinges |
| Failure | Sudden load drop | Walls lose effectiveness, catenary action governs | Connection fracture or concrete crushing |
The finding that infill walls reduce ductility is important. While the walls increase the peak load capacity, they also make the structure more brittle. This is because the walls fail suddenly, and their failure can trigger a redistribution of load that the structure may not be able to accommodate. In a progressive collapse scenario, this brittleness is a concern, as it reduces the structure's ability to deform and absorb energy before failure.
Engineering Practice Insights
From a construction perspective, this study highlights the importance of the infill walls in the overall structural behavior. In many projects, the infill walls are considered non-structural and are not included in the structural analysis model. This study shows that this assumption can be unconservative, as the walls contribute significantly to the structure's resistance against progressive collapse. However, the study also shows that the walls reduce ductility, which means that the structure may not be able to sustain the large deformations required for catenary action to fully develop.
In my experience, the interaction between the infill walls and the structural frame is often overlooked during construction sequencing. The walls are typically built after the frame is erected, and their presence can significantly change the load path. For example, if a column is removed during construction, the infill walls may not yet be in place, and the structure may not have the additional resistance that the walls would provide. This is a critical consideration for construction safety, particularly in buildings where progressive collapse is a concern.
The study's use of ABAQUS/Implicit to model the infill walls is a step forward in terms of analytical capability. However, the modeling of the wall-frame interaction is complex, and the results are sensitive to the material models and interface properties used. In practice, this means that the analytical predictions should be validated against full-scale test data before they are used for design. The authors did this, which is commendable, but the validation is limited to a single test configuration.
Key Questions and Reflections
One question that this study raises is whether the contribution of infill walls should be included in progressive collapse design. The current design philosophy, as outlined in most codes, is to design the structure to resist progressive collapse through the beam mechanism and catenary action of the frame alone, ignoring the contribution of non-structural elements. This study suggests that this approach is conservative, as the infill walls provide additional resistance. However, the reduction in ductility is a concern, as it may affect the structure's ability to develop catenary action.
Another question is the effect of wall opening ratios. The study found that different opening ratios affect the initial stiffness, peak load, and displacement ductility. This is intuitive, as openings in the walls reduce their ability to act as diagonal struts. However, the practical implication is that the design of infill walls should be coordinated with the structural design, and the openings should be considered in the analysis. This is not always done in practice, as the infill walls are often designed by the architect without input from the structural engineer.
The study also raises the question of how the infill walls affect the connection behavior. The walls provide lateral restraint to the beams, which can change the failure mode of the connections. In a frame without infill walls, the connections are typically designed to develop a plastic hinge in the beam. With infill walls, the beam is restrained, and the connection may be subjected to higher axial forces, which can affect its capacity. This is a subtle but important interaction that is not fully addressed in the study.
Study Insights and Implications
The practical implication of this study is that progressive collapse design should consider the contribution of infill walls, but with caution. The walls provide additional resistance, but they also reduce ductility, which can be detrimental in a collapse scenario. The design engineer should therefore consider both the benefits and the drawbacks of including the walls in the analysis.
From a construction perspective, the study emphasizes the importance of the construction sequence. The infill walls should be built in a way that does not compromise the structural frame's ability to resist progressive collapse. For example, if the walls are built after the frame is erected, the structure may not have the additional resistance during the construction phase. This is a critical safety consideration.
For the steel pipe industry, this study has indirect implications. The CFST columns used in this study are essentially steel tubes filled with concrete, and the interaction between the tube and the concrete core is critical to the column's behavior. The study shows that the composite action between the steel and concrete is important for the overall structural performance, and this is a lesson that applies to any CFST structure.
Conclusion and Outlook
The progressive collapse resistance of CFST composite frames with infill walls is a complex topic that requires careful consideration of both structural and construction factors. This study provides valuable insight into the contribution of infill walls, but it also raises important questions about the interaction between the walls and the frame. The design engineer must balance the benefits of the walls' additional resistance against the drawbacks of reduced ductility, and the construction manager must ensure that the construction sequence does not compromise the structure's safety.
For the steel pipe and pipe fitting industry, this study reinforces the importance of understanding the composite action between steel and concrete. The CFST column is a critical structural element, and its behavior under extreme loading conditions is governed by the interaction between the steel tube and the concrete core. As we continue to develop new composite structures, studies like this one are essential for ensuring that our designs are both safe and efficient.
Zhuojin Pipe Fitting Co., Ltd