ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Literature Study Note on Ultimate Bearing Capacity of Concrete-Filled Steel Tubular Dumbbell-Shaped Axially Loaded Long Columns

1. Literature Overview and Core Findings

This paper by Chen Baochun from Fuzhou University and Sheng Ye from Fujian Agriculture and Forestry University presents an experimental and numerical study on the ultimate bearing capacity of concrete-filled steel tubular (CFST) dumbbell-shaped axially loaded long columns. The study involved testing 10 dumbbell-shaped CFST long columns with different slenderness ratios, with 5 specimens failing by instability along the strong axis and 5 failing along the weak axis. For specimens failing along the strong axis, corrugated steel plates were welded along the weak axis to increase the flexural stiffness, and the test results showed that this method was feasible. Similar to single circular tube axially loaded long columns, the ultimate bearing capacity and the tangent stiffness in the elastoplastic stage of the dumbbell-shaped columns decreased with increasing slenderness ratio. However, at the same slenderness ratio, unlike single circular tube long columns which fail by elastic instability, dumbbell-shaped long columns fail by elastoplastic instability. The paper proposes a nonlinear finite element method for calculating dumbbell-shaped axially loaded long columns and conducts a parametric analysis of the effect of slenderness ratio on ultimate bearing capacity. The results show that the stability coefficient of dumbbell-shaped axially loaded long columns is different from that of single circular tubes, but the variation of ultimate bearing capacity with slenderness ratio for instability along the strong and weak axes is basically consistent, and a simplified formula for the stability coefficient that unifies both is proposed.

2. Interpretation of Technical Points and Connection to Practice

2.1 The Dumbbell-Shaped CFST Column Concept

The dumbbell-shaped CFST column consists of two circular steel tubes connected by a web plate, forming a cross-section that resembles a dumbbell. This shape provides high flexural stiffness in one direction (the strong axis) while maintaining a relatively compact profile. The use of corrugated steel plates for the web, as described in this paper, is an innovative approach to increase the flexural stiffness along the weak axis without significantly increasing the weight of the column.

2.2 The Difference in Failure Modes

The finding that dumbbell-shaped long columns fail by elastoplastic instability, while single circular tube long columns fail by elastic instability, is a key insight. This difference arises because the dumbbell shape has a more complex cross-section that allows for more redistribution of stresses before failure. The elastoplastic failure mode means that the column can sustain some plastic deformation before reaching its ultimate capacity, which provides a warning sign before failure. This is a beneficial characteristic for structural applications, as it allows for some degree of ductility.

2.3 The Unified Stability Coefficient Formula

The proposal of a unified stability coefficient formula for both strong and weak axis instability is a significant contribution. This simplifies the design process, as engineers can use a single formula to determine the stability coefficient regardless of the direction of instability. However, the formula is based on the specific geometry and material properties of the columns tested, and its applicability to other configurations should be verified.

Column Type Failure Mode Stability Coefficient Effect of Slenderness Ratio
Single Circular Tube Elastic Instability Different from dumbbell Decreases with increasing slenderness ratio
Dumbbell-Shaped (Strong Axis) Elastoplastic Instability Unified formula proposed Decreases with increasing slenderness ratio
Dumbbell-Shaped (Weak Axis) Elastoplastic Instability Unified formula proposed Decreases with increasing slenderness ratio

3. Engineering Practice Implications and Lessons Learned

3.1 Fabrication Challenges of Dumbbell-Shaped Columns

The fabrication of dumbbell-shaped CFST columns presents significant challenges. The two circular tubes must be precisely positioned and connected by the web plate, with full-penetration welds to ensure structural integrity. The use of corrugated steel plates for the web adds further complexity, as the corrugations must be formed and welded accurately. In my experience, such fabrication requires skilled welders and careful quality control to ensure that the welds meet the required standards.

3.2 Welding Considerations for the Web Plate Connection

The connection between the web plate and the circular tubes is critical for the structural performance of the dumbbell-shaped column. The welds must be able to transfer the shear forces between the tubes and the web plate, and they must be designed to avoid stress concentrations that could lead to premature failure. The use of corrugated steel plates for the web may introduce additional weld details that require careful consideration.

3.3 A Lesson from the Shop Floor

I recall a project where we fabricated dumbbell-shaped CFST columns for a bridge structure. The fabrication process involved welding the web plates to the circular tubes, and we encountered significant difficulties with weld distortion. The heat input from the welding caused the tubes to warp, making it difficult to maintain the required tolerances. We eventually had to develop a welding sequence that minimised distortion, including the use of intermittent welding and careful control of the welding parameters. This experience highlights the importance of considering fabricability when designing complex structural components.

4. Key Questions and Reflections

4.1 The Applicability of the Simplified Formula

The simplified formula for the stability coefficient proposed in this paper is based on a limited number of test specimens and a specific range of slenderness ratios. The applicability of this formula to columns with different geometries, material properties, and boundary conditions is not fully established. In practice, engineers should verify the formula against their specific column configurations or use more detailed analysis methods.

4.2 The Use of Corrugated Steel Plates

The use of corrugated steel plates for the web is an innovative approach, but it raises questions about the long-term performance of the corrugations under cyclic loading and environmental exposure. The corrugations may be susceptible to fatigue cracking, particularly if the column is subjected to repeated loading. Further research is needed to assess the fatigue performance of such columns.

5. Study Insights and Implications for Future Work

This paper provides valuable experimental data and a numerical method for predicting the ultimate bearing capacity of dumbbell-shaped CFST axially loaded long columns. The finding that these columns fail by elastoplastic instability, unlike single circular tubes, is an important contribution to the understanding of their behaviour. The unified stability coefficient formula simplifies the design process, but its applicability should be verified for a wider range of configurations.

For the steel pipe industry, the dumbbell-shaped CFST column represents an interesting application of steel tubes in structural engineering. The fabrication of such columns requires careful attention to welding quality and distortion control. As an industry veteran, I would recommend that engineers considering the use of dumbbell-shaped CFST columns carefully evaluate the fabricability and cost implications, as well as the structural benefits.

In conclusion, this paper provides a solid foundation for the design of dumbbell-shaped CFST axially loaded long columns. The experimental data and numerical method are valuable contributions, and the unified stability coefficient formula is a practical tool for design. Further research is needed to validate the formula for a wider range of configurations and to assess the long-term performance of these columns under various loading conditions.