ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Seismic Fragility of a Special-Shaped CFST Arch Bridge under Transverse Excitation: Practical Lessons

Overview of the Study

This paper presents a seismic fragility analysis of a special-shaped concrete-filled steel tube (CFST) arch bridge under transverse earthquake excitation. The authors used MIDAS/Civil to build a nonlinear finite element model of the bridge and performed incremental dynamic analysis (IDA) to generate fragility curves for the main components: piers, arch ribs, and bearings. They used curvature ductility ratio for the piers and arch ribs, and displacement ductility ratio for the bearings, as damage indices. They then constructed system-level fragility curves using first-order and second-order bounds estimation methods.

For those of us in the steel pipe business, an arch bridge is one of the most demanding applications for our product. The arch ribs are typically large-diameter steel tubes, either seamless or welded, filled with concrete. The special-shaped arch in this study adds another layer of complexity because the geometry is not a simple circular or parabolic arch, which means the stress distribution is more complex and the seismic response is harder to predict.

IDA and Fragility Curve Methodology

The incremental dynamic analysis (IDA) approach is a well-established method for seismic assessment. It involves scaling a ground motion record to increasing intensity levels and analyzing the structure's response at each level. The fragility curve then plots the probability of exceeding a given damage state against the seismic intensity measure.

The choice of damage indices is critical. Curvature ductility ratio is a good measure for flexural members like piers and arch ribs because it directly relates to the plastic rotation capacity. Displacement ductility ratio for bearings is appropriate because bearings are typically designed to accommodate relative displacement between the superstructure and substructure.

The bounds estimation method is used to combine component fragilities into a system fragility. The first-order bound assumes that the components fail independently, which gives a lower bound on the system failure probability. The second-order bound accounts for the correlation between component failures, giving a narrower range. This is a practical approach because it avoids the need for a full system-level analysis, which would be computationally expensive.

Key Findings and Their Engineering Significance

The study's main findings are summarized in the table below.

Component Vulnerability under Transverse Seismic Loading Remarks
Bearings Most vulnerable Damage occurs at relatively low seismic intensity
Piers Second most vulnerable Damage occurs at moderate seismic intensity
Arch ribs Least vulnerable Show good robustness; damage only at high intensity

The finding that bearings are the most vulnerable components is consistent with my experience. Bearings are often the weak link in a bridge's seismic system because they are designed to accommodate thermal movements and small seismic displacements, but they may not have sufficient displacement capacity for large earthquakes. When the bearing displacement exceeds its capacity, it can unseat or fracture, leading to a loss of support for the superstructure.

The arch ribs showing good robustness is also encouraging. The CFST arch rib, being a large-diameter steel tube filled with concrete, has high strength and stiffness. The steel tube provides confinement to the concrete, and the concrete provides internal support to prevent local buckling of the steel tube. This composite action gives the arch rib excellent ductility and energy dissipation capacity.

The finding that the most vulnerable region of the arch rib is at the arch foot is important. The arch foot is where the rib meets the foundation or the pier, and it is subjected to the highest bending moments and shear forces. The paper recommends strengthening this region with additional detailing, which is a practical and cost-effective measure.

Practical Implications for Arch Bridge Construction

For those of us who supply steel pipe for arch bridges, this study has several practical implications.

  1. Arch rib pipe quality: The arch rib is the most critical member, and the pipe used for it must have excellent mechanical properties. We typically specify high-strength steel with good toughness at the design temperature. The weld quality between pipe segments is also critical, especially at the arch foot where the stress is highest.
  2. Arch foot detailing: The paper's recommendation to strengthen the arch foot region is something we should support. This can be done by increasing the wall thickness of the pipe in that region, adding stiffening rings, or providing additional confinement to the concrete. In our shop, we have fabricated arch ribs with thickened sections at the foot, which requires careful welding and heat treatment to avoid distortion.
  3. Bearings: Since bearings are the most vulnerable components, they should be designed with adequate displacement capacity. This may mean using larger bearings or providing a seismic isolation system. The bearing connection to the arch rib and the pier must also be designed to resist the forces transmitted during an earthquake.
  4. Nonlinear modeling: The study used a nonlinear finite element model, which is essential for capturing the inelastic behavior of the structure. For a CFST arch, the nonlinearity comes from the concrete cracking and crushing, the steel yielding, and the bond-slip between the steel and concrete. Getting these material models right is crucial for a reliable fragility analysis.

My Reflections and Lessons Learned

This paper is a good example of how seismic fragility analysis can guide design decisions. The key takeaway is that the arch rib, despite being the main structural element, is not necessarily the most vulnerable. The bearings and piers are more likely to be damaged in an earthquake, and they should be the focus of the seismic design effort.

One lesson I have learned from working on arch bridges is that the connection between the arch rib and the foundation is often the most difficult part to build. The geometry is complex, the welding is challenging, and the quality control is demanding. A failure at this connection could be catastrophic, so it deserves special attention.

Another practical point: the study used a specific ground motion set and a specific bridge configuration. The results may not be directly applicable to other bridges with different geometries or in different seismic zones. However, the methodology is transferable, and the findings about the relative vulnerability of components are likely to hold for similar bridge types.

Conclusion

This study provides a valuable framework for assessing the seismic vulnerability of special-shaped CFST arch bridges. The key finding that bearings and piers are more vulnerable than arch ribs is a reminder that the design effort should not be concentrated solely on the main structural members. The arch rib, being a robust CFST member, can withstand significant seismic loading, but the connections and supports need careful attention. For those of us in the steel pipe industry, this study underscores the importance of producing high-quality pipe for arch ribs and ensuring that the connections are properly detailed and fabricated. The next time I see an arch bridge under construction, I will look at the arch foot and the bearings with a new appreciation for their critical role in the bridge's seismic performance.