ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Numerical Simulation of Blast Resistance of FRP-Confined Concrete-Filled Steel Tube Columns

1. Literature Overview and Core Problem

This paper by Zhao Junhai, Dong Jing, Zhang Dongfang and Li Yingping, published in the Journal of Architecture and Civil Engineering, Vol.37, No.2, 2020, investigates the blast resistance of fibre-reinforced polymer (FRP)-confined concrete-filled steel tube (CFST) columns.

The authors establish a numerical model using LS-DYNA nonlinear finite element analysis, with the high-energy explosive material model and equation of state to apply the blast load, and a multi-material fluid-structure interaction method for the simulation. The model is validated against experimental data, and then used to study the dynamic response of FRP-CFST columns under blast loading.

The key findings are:

  1. FRP confinement effectively improves the blast resistance of CFST columns.
  2. The vulnerable parts of the column are the mid-height and the two ends.
  3. Increasing the number of FRP layers, increasing the steel tube yield strength, and increasing the concrete strength all improve the blast resistance.

From my perspective, this is a timely and important study. Blast-resistant design is becoming increasingly important for buildings in urban areas, and CFST columns are widely used in high-rise buildings. The addition of FRP confinement is a relatively new and innovative approach that can significantly enhance the blast resistance of these columns.

2. Technical Interpretation of the Numerical Simulation

2.1 Modelling Approach

The authors use LS-DYNA with a multi-material fluid-structure interaction method. This is a sophisticated approach that captures the interaction between the blast wave and the structure.

Modelling Component Method Used Key Parameters
Explosive material High-energy explosive material model Detonation velocity, Chapman-Jouget pressure
Air Equation of state Density, pressure, internal energy
Steel tube Plastic kinematic material model Yield strength, strain hardening, strain rate effects
Concrete Concrete damage material model Compressive strength, tensile strength, damage parameters
FRP Composite material model Fibre orientation, layer thickness, failure criteria
Fluid-structure interaction Multi-material ALE Coupling between air and structure

The use of a multi-material fluid-structure interaction method is important because it allows the blast wave to propagate through the air and interact with the structure. This is more realistic than simply applying a pressure-time history to the structure, as it captures the effects of wave reflection and diffraction.

2.2 Validation Against Experimental Data

The model is validated against experimental data, which gives confidence in its ability to predict the blast response of FRP-CFST columns. The validation includes:

Validation Metric Experimental Result Model Prediction Agreement
Peak displacement Measured Close to measured Good
Residual displacement Measured Slightly higher Acceptable
Failure mode Local buckling at mid-height Similar Good
Time to peak displacement Measured Close to measured Good

The validation is crucial because it establishes the credibility of the model. Without this step, the parametric study would be of questionable value.

2.3 Parametric Study Results

The parametric study varies the number of FRP layers, the steel tube yield strength, and the concrete strength, and observes the effect on the blast resistance of the column.

Parameter Varied Range Effect on Blast Resistance
Number of FRP layers 0–4 layers Significant improvement with each layer
Steel tube yield strength 235–420 MPa Moderate improvement
Concrete strength 30–60 MPa Moderate improvement

The results show that:

  1. FRP confinement is the most effective parameter for improving blast resistance. Each additional layer of FRP provides a significant improvement in the column's ability to resist blast loading.
  2. Increasing the steel tube yield strength provides a moderate improvement. This is because the steel tube's primary role is to provide confinement to the concrete core, and a higher yield strength allows the tube to resist higher hoop stresses.
  3. Increasing the concrete strength provides a moderate improvement. This is because the concrete core's primary role is to resist axial compression, and a higher strength allows the core to carry more load without crushing.

3. Engineering Practice Implications

3.1 Blast-Resistant Design Considerations

For a structural engineer designing a building with potential blast threats, this paper provides valuable guidance:

Design Parameter Recommended Value Rationale
FRP layers on CFST columns 2–4 layers Provides significant improvement in blast resistance
Steel tube yield strength 355 MPa or higher Provides adequate confinement to the concrete core
Concrete strength 40 MPa or higher Provides adequate axial load capacity
FRP wrap orientation 90° (hoop direction) Provides maximum confinement

The vulnerable parts of the column are the mid-height and the two ends. This is because:

  1. The mid-height is the point of maximum bending moment under lateral blast loading.
  2. The ends are the points of maximum shear and moment, and they are also the locations where the column connects to the beam or the foundation.

3.2 Steel Pipe Manufacturing and FRP Application Considerations

From the steel pipe manufacturing side, the blast resistance of a CFST column depends on the quality of the steel tube and the quality of the FRP application.

Parameter Manufacturing Consideration Effect on Blast Resistance
Steel tube wall thickness Adequate thickness to resist hoop stress Higher thickness improves blast resistance
Steel tube weld quality Sound welds to avoid premature failure Weld defects reduce blast resistance
Steel tube surface preparation Proper surface preparation for FRP bonding Poor surface preparation reduces