ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Microstructural Evolution of 10CrMo910 Steel Pipe After 300,000 Hours of Simulated Service

Overview of the Literature

This paper by Wang Zhiwu, Song Tao, Yang Xiaolu and Sun Zhe from the School of Power and Mechanical Engineering at Wuhan University presents a microstructural analysis of 10CrMo910 steel pipe after 300,000 hours (3 × 10⁵ h) of simulated service. Using optical microscopy, scanning electron microscopy, transmission electron microscopy and electron probe microanalysis, the authors found that: (1) the long strip-shaped M₃C carbides in the bainite split into short rod-shaped carbides; (2) granular retained austenite precipitates in the ferrite; (3) the fine needle-shaped Mo₂C carbides gradually transform into granular carbides; (4) after 300,000 hours of simulated service, Cr and Mo diffuse to the grain boundaries, and the Cr and Mo in solid solution in the bainite and blocky ferrite diffuse to the carbides, resulting in a decrease in the Cr and Mo content in the bainite and ferrite matrix.

Technical Interpretation and Metallurgical Insight

This is a topic that is directly relevant to the power generation industry, where 10CrMo910 steel is widely used for high-temperature steam piping. Let me explain the metallurgical mechanisms.

The Material

10CrMo910 is a 2.25Cr-1Mo steel, which is a standard material for high-temperature service in power plants. It is typically used for main steam piping and headers in boilers operating at temperatures up to 560 °C. The material is supplied in the normalized and tempered condition, with a bainitic microstructure.

The Microstructural Evolution

The microstructural evolution of 10CrMo910 steel during service is a complex process that involves several mechanisms:

  1. Carbide coarsening — the M₃C carbides in the bainite coarsen and change morphology from long strips to short rods. This is a diffusion-controlled process that is driven by the reduction in interfacial energy.
  2. Mo₂C precipitation and coarsening — the fine needle-shaped Mo₂C carbides gradually transform into granular carbides. Mo₂C is a secondary hardening phase that provides creep strength, and its coarsening results in a loss of creep strength.
  3. Cr and Mo diffusion — Cr and Mo diffuse from the matrix to the grain boundaries and to the carbides. This results in a depletion of Cr and Mo in the matrix, which reduces the solid solution strengthening and the corrosion resistance.

The Significance of the Changes

The microstructural changes observed in this study are significant because they directly affect the mechanical properties of the material:

  1. The coarsening of the carbides reduces the creep strength. The carbides act as obstacles to dislocation motion, and their coarsening reduces their effectiveness.
  2. The depletion of Cr and Mo in the matrix reduces the solid solution strengthening. This results in a reduction in the yield strength and the creep strength.
  3. The depletion of Cr in the matrix reduces the corrosion resistance. Cr is the primary element that provides oxidation and corrosion resistance.

Practical Experience and Plant Perspective

I have been involved in the supply of 10CrMo910 steel pipe for power plant applications, and I have seen the challenges that arise in practice. Let me share some observations.

The Importance of Creep Life Assessment

The microstructural evolution of 10CrMo910 steel is the basis for creep life assessment. The standard method for assessing the remaining life of a component is to measure the carbide coarsening and the depletion of Cr and Mo in the matrix. This is typically done using metallographic replication, which is a non-destructive technique that can be performed in situ.

The Limitations of Creep Life Assessment

The creep life assessment methods are based on the assumption that the microstructural evolution is uniform throughout the component. In practice, the microstructural evolution is not uniform — it is faster at the hottest locations and slower at the cooler locations. This means that the creep life assessment must be based on the most critical location.

The Challenges of Inspection

The inspection of high-temperature piping is challenging because the piping is often insulated and the access is difficult. The metallographic replication technique requires the removal of the insulation and the preparation of the surface, which is time-consuming and expensive.

Key Questions and Reflections

What Is the Relationship Between Microstructural Evolution and Creep Life?

The microstructural evolution of 10CrMo910 steel is directly related to the creep life. The coarsening of the carbides and the depletion of Cr and Mo in the matrix are both indicators of the accumulated creep damage. However, the exact relationship is complex and depends on the temperature and the stress.

What Is the Significance of the Retained Austenite?

The authors found that granular retained austenite precipitates in the ferrite. This is a significant finding because retained austenite is not typically expected in a normalized and tempered material. The retained austenite could be a result of the simulated service conditions, or it could be a result of the original heat treatment.

What Are the Implications for Remaining Life Assessment?

The findings of this study have implications for the remaining life assessment of 10CrMo910 steel components. The microstructural changes observed are consistent with the expected evolution during service, and they provide a basis for the development of more accurate remaining life assessment methods.

Study Insights and Implications for Practice

This paper provides valuable experimental data on the microstructural evolution of 10CrMo910 steel after long-term service. For engineers working in the power generation industry, the key takeaways are:

  1. The microstructural evolution of 10CrMo910 steel is a diffusion-controlled process. The coarsening of the carbides and the depletion of Cr and Mo in the matrix are both driven by diffusion.
  2. The coarsening of the carbides reduces the creep strength. This is the primary mechanism of creep damage in 10CrMo910 steel.
  3. The depletion of Cr and Mo in the matrix reduces the solid solution strengthening and the corrosion resistance. This is a secondary mechanism of degradation.
  4. The microstructural changes can be used as indicators of accumulated creep damage. The measurement of carbide coarsening and matrix depletion can be used for remaining life assessment.

Reference Value and Outlook

This paper is a valuable contribution to the field of materials degradation in power plant components. The experimental data provides a basis for the development of more accurate remaining life assessment methods for 10CrMo910 steel components.

For the steel pipe industry, this paper is a reminder that the long-term performance of high-temperature piping is determined by the microstructural stability of the material. The manufacturing process must be controlled to ensure that the material has the optimal microstructure for the intended service conditions. The heat treatment, the chemical composition and the manufacturing process all contribute to the microstructural stability of the material.

The findings of this study are particularly relevant for the assessment of remaining life of 10CrMo910 steel components that have been in service for extended periods. As power plants continue to operate beyond their original design life, the accurate assessment of remaining life becomes increasingly important.