Steel Tube Concrete Construction Technology for Shanghai Shimao Deep Pit Hotel
1. Literature Overview and Project Context
The paper by Wei Ding, Chen Wenlong, Xie Gaohua, and colleagues from China Construction Eighth Engineering Division Corp., Ltd. and the University of Shanghai for Science and Technology, published in Construction Technology (2017, Vol. 46, No. 19), presents the steel tube concrete (CFST) construction technology used for the Shanghai Shimao Deep Pit Hotel. This project is remarkable for its unique architectural form: the building descends into an abandoned quarry, with the steel structure outer contour exhibiting both horizontal and vertical double curvature.
The steel tube columns in this project presented several significant challenges:
- The columns have a faceted (folded) profile in elevation with large inclination angles.
- The tube diameters are relatively small.
- The tubes contain many horizontal and vertical stiffening diaphragms of considerable size.
- Concrete must be delivered to extreme depths in a downward direction.
These challenges are not typical of standard CFST construction. In most high-rise buildings, concrete is pumped upward through the steel tube. Here, the concrete must be delivered downward, sometimes at steep angles, through a complex internal structure with multiple diaphragms. The risk of segregation, blockage, and incomplete filling is significantly higher.
2. Core Technical Challenges and Solutions
2.1 Concrete Delivery in a Downward Direction
The most critical technical challenge was delivering concrete downward through the steel tube columns. In conventional CFST construction, concrete is pumped from the bottom upward, using the pump pressure to overcome gravity and friction. In this project, the concrete must flow downward, which means:
- Gravity assists the flow, but also increases the risk of segregation.
- The concrete must have sufficient viscosity to prevent aggregate from separating from the mortar.
- The flow must be controlled to avoid free-fall, which can cause aggregate segregation and air entrapment.
The authors addressed this through careful mix design and controlled pouring. The concrete was designed with appropriate workability and viscosity to ensure cohesive flow without segregation. The pouring process was divided into stages, with each stage carefully controlled to maintain a continuous flow and avoid free-fall conditions.
2.2 Internal Stiffening Diaphragms
The presence of multiple horizontal and vertical stiffening diaphragms inside the steel tube created additional challenges:
- The diaphragms restrict the flow path, creating potential blockage points.
- Concrete must flow around and through the diaphragm openings.
- The space between the diaphragm and the tube wall can be difficult to fill completely.
The authors addressed this by:
- Carefully designing the diaphragm openings to allow adequate concrete flow.
- Using a concrete mix with high flowability and self-compacting characteristics.
- Employing vibration at critical locations to ensure complete filling.
- Using sample columns to verify the filling process before full-scale production.
2.3 Sample Column Testing
Before proceeding with full-scale construction, the team fabricated sample columns that replicated the actual geometry and internal structure. These sample columns were used to:
- Test the concrete mix design under actual conditions.
- Verify the pouring procedure and sequence.
- Identify potential blockage points and flow issues.
- Develop the quality control procedures for the actual construction.
This is exactly the right approach. In my experience, when you have a complex geometry with multiple internal obstructions, you cannot rely on theoretical calculations alone. You need to physically test the process to identify problems before they occur on the actual structure.
3. Quality Control and Verification Methods
3.1 Infrared Thermal Imaging for Compactness Verification
A particularly innovative aspect of this project was the use of infrared thermal imaging to verify the compactness of the concrete inside the steel tube. The principle is:
- Concrete generates heat during hydration (exothermic reaction).
- The heat distribution on the steel tube surface reflects the presence and distribution of concrete inside.
- Areas with incomplete filling or voids will show different thermal signatures compared to areas with dense, well-compacted concrete.
The infrared thermal imaging method allowed the construction team to:
- Detect voids and incomplete filling without destructive testing.
- Verify the effectiveness of the pouring and vibration process.
- Identify areas requiring remedial grouting.
- Document the quality of the completed CFST columns.
This is a practical and non-destructive approach that has significant potential for wider application in CFST construction. Traditional verification methods include:
| Method | Advantages | Limitations |
|---|---|---|
| Ultrasonic testing | Quantitative, detects voids | Requires access to both sides, difficult in complex geometry |
| Radiographic testing | Visual, detects voids | Radiation safety concerns, expensive |
| Impact echo | Detects voids and delamination | Requires surface access, interpretation requires expertise |
| Infrared thermal imaging | Non-contact, fast, full-field | Requires thermal contrast, affected by ambient conditions |
| Core sampling | Direct verification | Destructive, expensive, limited coverage |
The infrared thermal imaging method is particularly attractive because it provides full-field coverage and can be performed quickly without disrupting construction. However, it requires careful attention to:
- Ambient temperature and wind conditions.
- The time after concrete placement (heat generation peaks at 24–72 hours).
- The thermal properties of the steel tube and concrete.
- The presence of internal stiffeners, which can create thermal shadows.
3.2 Quality Control Procedures
The authors emphasized the importance of detailed quality control procedures, including:
- Pre-pour inspection of the steel tube to verify cleanliness and absence of debris.
- Verification of concrete mix properties at the batching plant and at the point of placement.
- Continuous monitoring of the pouring process to ensure uninterrupted flow.
- Post-pour verification using infrared thermal imaging.
- Documentation of all quality control activities for traceability.
4. Engineering Practice Cases and Lessons Learned
4.1 Real-World Application
The Shanghai Shimao Deep Pit Hotel is a landmark project that pushed the boundaries of CFST construction. The successful completion of the steel tube concrete columns demonstrates that:
- Complex geometry and internal structure can be managed with careful planning and testing.
- Downward concrete delivery is feasible with appropriate mix design and pouring control.
- Infrared thermal imaging is an effective non-destructive verification method.
4.2 Key Lessons for the Construction Site
- Test before you build. The sample column approach is essential for complex CFST structures. Do not skip this step, no matter how confident you are in the design.
- Control the concrete mix, not just the pouring. The concrete must be designed for the specific conditions of the project. A mix that works for upward pumping may not work for downward delivery.
- Verify, verify, verify. Do not rely on visual inspection alone. Use non-destructive methods like infrared thermal imaging to verify the actual condition of the concrete inside the steel tube.
- Plan for contingencies. Even with the best planning, problems can occur. Have a contingency plan for remedial grouting and void filling.
4.3 Common Defects and Countermeasures
| Defect | Cause | Countermeasure |
|---|---|---|
| Voids at the top of the column | Concrete shrinkage, inadequate pouring | Use micro-expansion concrete, post-pour grouting |
| Segregation | Free-fall of concrete, excessive vibration | Control pour height, use cohesive mix design |
| Incomplete filling around diaphragms | Restricted flow path, inadequate vibration | Design diaphragm openings for flow, use self-compacting concrete |
| Blockage | Aggregate bridging, insufficient flowability | Use smaller aggregate, increase flowability, use pumping aids |
| Cold joints | Interrupted pouring | Ensure continuous supply, use appropriate pour sequence |
5. Study Insights and Implications
This paper provides valuable practical guidance for CFST construction in challenging conditions. The key insights are:
- The combination of careful mix design, controlled pouring, and non-destructive verification is essential for successful CFST construction.
- Infrared thermal imaging is a powerful tool for verifying concrete compactness, but it requires careful application and interpretation.
- The sample column approach is an effective way to validate construction procedures before full-scale application.
- Downward concrete delivery is feasible with appropriate mix design and pouring control, but requires more attention to segregation and flow control than upward pumping.
For engineers working on similar projects, the lessons are clear:
- Invest time in mix design and testing before construction.
- Use sample columns to validate procedures.
- Implement rigorous quality control with non-destructive verification.
- Plan for contingencies and remedial measures.
6. Reference Value and Outlook
The technology described in this paper has direct application to other CFST structures with complex geometry, including:
- Curved and inclined columns in architectural structures.
- Large-diameter CFST columns in high-rise buildings.
- CFST structures in underground and deep foundation applications.
The use of infrared thermal imaging for quality verification is an emerging technology with significant potential. Future developments may include:
- Automated thermal imaging systems with real-time analysis.
- Integration with other non-destructive testing methods.
- Development of quantitative criteria for void detection based on thermal signatures.
The Shanghai Shimao Deep Pit Hotel project demonstrates that with careful planning, testing, and quality control, even the most challenging CFST construction can be completed successfully. This paper is a valuable reference for engineers facing similar challenges in their own projects.
Zhuojin Pipe Fitting Co., Ltd