ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Honeycomb Steel Tube Confined Concrete Targets Under Multi-Hit Projectile Impact: A Shop Floor Perspective

Literature Overview and Core Findings

This study by Song Dianyi and colleagues from the National University of Defense Technology addresses a critical question in protective structures: how does confining concrete within a honeycomb arrangement of steel tubes improve resistance to multiple projectile impacts? The work compares honeycomb steel tube confined concrete targets (STCC) against semi-infinite concrete targets under repeated 12.7 mm armor-piercing projectile strikes.

The core findings are significant for anyone involved in protective infrastructure design. The honeycomb steel tube arrangement confines the concrete damage to the impacted cell, preventing the typical brittle spalling and cratering that propagates through unconfined concrete. The measured penetration depth (DOP) reduction of approximately 18% after four hits and the dramatic 78% reduction in crater volume and 55% reduction in crater depth after six hits demonstrate the superior multi-hit performance of the confined system.

Technical Interpretation and Key Parameters

From my decades in the steel pipe industry, the manufacturing and fabrication aspects of this honeycomb configuration are what truly interest me. The honeycomb cells are formed from standard steel tubes, likely in the 100-200 mm diameter range, welded together to form a cellular matrix. The key manufacturing considerations include:

Parameter Typical Range Engineering Significance
Tube diameter 100-200 mm Determines cell size and confinement efficiency
Tube wall thickness 3-8 mm Critical for resisting radial expansion from concrete
Weld quality between tubes Full penetration required Ensures honeycomb acts as a monolithic structure
Concrete fill High-strength, self-compacting Must fully fill cells without voids
Tube spacing Zero gap (welded face-to-face) Maximizes confinement effect

The weld between adjacent tubes is the most critical manufacturing aspect. In my experience, these welds must be full penetration to ensure the honeycomb acts as a unified structure. Any lack of fusion or porosity in these welds creates a weak link where the confinement effect is lost, and the concrete can spall through the gap between tubes. For a 12.7 mm armor-piercing projectile impacting at velocities likely exceeding 800 m/s, even small defects can initiate catastrophic failure.

Engineering Practice and Site Considerations

The damage modes observed in this study—funnel crater, penetration tunnel, and lateral cracking—are consistent with what I have seen in other confined concrete systems. However, the honeycomb arrangement offers a unique advantage: the confinement is localized, meaning damage to one cell does not propagate to adjacent cells. This is analogous to how ship hulls are compartmentalized to limit flooding.

From a delivery and site installation perspective, there are several practical considerations:

  1. Module fabrication: Honeycomb STCC targets are best fabricated as modular panels in the shop, where welding quality can be controlled and inspected. Field welding of the honeycomb matrix is difficult and prone to defects.
  2. Concrete placement: Self-compacting concrete is essential for filling the honeycomb cells. Vibration must be carefully controlled to avoid damaging the tube welds. In my experience, a 100 mm diameter cell requires careful placement to avoid voids, which would create stress concentrations under impact.
  3. Quality control: The welds between tubes should be inspected using ultrasonic testing (UT) or radiography (RT) to ensure full penetration. The concrete fill should be verified using ultrasonic pulse velocity testing to detect voids.

Key Questions and Reflections

This study raises an important question for protective structure design: what is the optimal cell size for a given threat? The honeycomb configuration in this study likely uses cells of 100-200 mm diameter, which is effective for 12.7 mm projectiles. However, for larger threats such as artillery shells or shaped charges, larger cells may be required, which would reduce the confinement efficiency.

From a manufacturing standpoint, I would ask: what is the cost-effectiveness of this system compared to a solid steel plate or a reinforced concrete wall? The honeycomb STCC offers superior multi-hit performance, but the fabrication cost is significantly higher due to the extensive welding required. In my experience, the decision to use such a system depends on the threat level and the criticality of the structure.

Study Insights and Implications

The key insight from this study is that confinement is the most effective way to improve concrete's impact resistance. The honeycomb arrangement provides a practical way to achieve this confinement in a modular, prefabricated form. For fellow engineers, I would emphasize the following takeaways:

From my years on the shop floor, I have learned that the best designs are those that can be reliably manufactured and installed. The honeycomb STCC system meets this criterion, provided that the manufacturing and quality control procedures are rigorously followed. This study provides valuable data that supports the wider adoption of this technology.