Matrix Displacement Method for Concrete-Filled Steel Tube Arch Structures
Literature Overview and Theoretical Framework
This paper by Xiong Feng, Tong Qiang and Lai Xiling from Sichuan University and Southwest Jiaotong University presents a matrix displacement method for the structural analysis of concrete-filled steel tube (CFST) arch bridges. The work was published in the Journal of Southwest Jiaotong University in 2000, reflecting a period when CFST arch bridges were gaining rapid popularity in China due to their excellent structural efficiency and construction advantages.
The fundamental approach treats the CFST section as a composite material, developing a spatial finite element substructure analysis of the cross-section, then converting the spatial sub-element into a line element using the plane section assumption. The resulting stiffness matrix for the line element captures the composite behaviour of the steel tube and concrete core under combined axial, bending and torsional loading.
Technical Points and Mathematical Formulation
The key innovation is the two-stage analysis. In the first stage, a detailed finite element model of the cross-section is established, discretising the steel tube wall and the concrete core into appropriate elements. This allows accurate determination of the section properties, including the effects of the steel-concrete interface, the nonlinear material behaviour of the concrete, and the residual stresses in the steel tube.
In the second stage, the plane section assumption is invoked to condense the spatial sub-element into a line element with equivalent stiffness properties. This is a classic approach in composite structure analysis, but the authors apply it specifically to CFST arches, where the curvature of the arch axis introduces additional complexity.
The resulting element stiffness matrix can be expressed in the standard form:
| Stiffness Component | Expression | Physical Meaning |
|---|---|---|
| Axial stiffness | EA_eq / L | Combined axial rigidity of steel and concrete |
| Bending stiffness | EI_eq / L | Combined flexural rigidity |
| Torsional stiffness | GJ_eq / L | Combined torsional rigidity |
| Coupling terms | Various | Interaction between axial and bending due to arch curvature |
The equivalent section properties are determined by integrating the contributions of the steel tube and concrete core, weighted by their respective elastic moduli. For the elastic range, this is straightforward. For the nonlinear range, the analysis requires iterative updating of the concrete modulus based on the current stress state.
Engineering Practice Implications and Construction Lessons
In my experience supplying steel pipe for CFST arch bridges, the structural analysis method directly affects the fabrication requirements. The matrix displacement method described in this paper provides a rational basis for determining the required steel tube dimensions and wall thickness, which in turn dictates the pipe manufacturing route.
For a typical CFST arch bridge with a span of 100-200 m, the steel tubes are usually 600-1200 mm in diameter with wall thicknesses of 12-20 mm. These are commonly manufactured as spiral welded pipe or LSAW pipe, depending on the diameter and the required quality level. The composite action between the steel tube and the concrete core means that the steel tube must provide sufficient confinement to prevent concrete splitting, particularly in the arch springing region where the compressive forces are highest.
The plane section assumption is valid for most CFST arch applications, but it breaks down in regions of high shear or where local buckling of the steel tube occurs. In practice, this means that the analysis method must be supplemented by detailed local checks at the arch springing, the crown and any intermediate loading points.
One practical issue I have encountered is the effect of the steel-concrete interface on the composite action. In many CFST arches, the concrete is pumped into the tube from the springing, and the interface condition depends on the concrete mix, the pumping pressure and the surface condition of the tube interior. A smooth, clean tube surface provides a lower bond strength than a roughened surface, which can reduce the composite action and increase the risk of slip at the interface.
Comparison with Alternative Analysis Methods
The matrix displacement method offers several advantages over simpler approaches:
| Analysis Method | Advantages | Limitations |
|---|---|---|
| Matrix displacement (this paper) | Captures composite action, suitable for nonlinear extension | Requires detailed section modelling |
| Equivalent section method | Simple, widely used | Ignores interface slip and nonlinear behaviour |
| Finite element method | Most accurate, handles complex geometry | Computationally intensive, requires skilled analysts |
| Simplified arch theory | Quick for preliminary design | Limited to elastic range, ignores composite effects |
The matrix displacement method sits between the simplified approaches and the full finite element method, offering a good balance of accuracy and computational efficiency. It is particularly suitable for the parametric studies needed in preliminary design, where multiple span configurations and section sizes need to be evaluated.
Study Insights and Future Development
The authors note that the method can be extended to nonlinear analysis of CFST arches, which is essential for ultimate limit state design and seismic assessment. The nonlinear behaviour of CFST arches is dominated by the concrete cracking and crushing, the steel tube yielding, and the interaction between these two mechanisms. The matrix displacement method provides a framework for incorporating these effects through iterative updating of the material properties.
From a practical standpoint, this paper reinforces the importance of accurate structural analysis in the design of CFST arches. The composite action between the steel tube and the concrete core is the fundamental advantage of this structural form, and it must be properly accounted for in the analysis. Underestimating the composite action leads to conservative designs with unnecessary steel weight; overestimating it leads to unsafe designs with inadequate safety margins.
For our industry, the key takeaway is that the analysis method must match the fabrication reality. If the analysis assumes perfect composite action, then the fabrication must ensure that the interface between the steel tube and the concrete core is capable of transferring the required shear forces. This means proper surface preparation, adequate concrete compaction, and the use of internal stiffeners or shear connectors where the interface stresses are high. The matrix displacement method provides a rational basis for determining where these measures are needed, and it is a valuable tool for engineers involved in the design and construction of CFST arch bridges.
Zhuojin Pipe Fitting Co., Ltd