ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Damage Modes of Long-Span CFST Arch Bridges under Near-Fault Earthquakes

Overview and Core Concept

The seismic performance of long-span bridges is a topic of critical importance, and the paper by Zhang Ling and Xu Lueqin focuses on a specific and particularly challenging scenario: near-fault earthquakes. These earthquakes are characterized by strong velocity pulses and high-frequency content that can impose severe demands on structures. The authors investigate the damage modes of a three-span flying-swallow CFST arch bridge, which is a common type in China. The bridge consists of a main arch made of concrete-filled steel tubes, flanked by reinforced concrete side arches. The study uses nonlinear time-history analysis with nine near-fault ground motion records, and it evaluates the damage based on the first damage time of key components, using PMM yield surfaces and PM curves.

This paper is a valuable reference for anyone involved in the design or assessment of CFST arch bridges. The findings are clear and actionable. The most vulnerable components are the side arch springing, followed by the quarter-span sections of the side arches and the diagonal braces of the K-shaped wind bracing, and then the main arch springing and the sections where the main arch cross-section changes. The tie bars and hangers are generally safe with a good margin of strength.

Key Findings and Damage Mechanisms

The authors identify two critical issues. First, the velocity pulse in near-fault earthquakes is a major cause of structural damage. This is a well-known phenomenon, but the paper provides specific evidence for CFST arch bridges. The pulse can induce large displacement demands that are not captured by standard response spectra. Second, the K-shaped wind bracing is a weak point. The diagonal braces can experience both compressive and tensile damage, depending on the direction of the seismic loading. This is a critical finding because the wind bracing is often considered a secondary structural element, but in this case, it plays a significant role in the overall seismic response.

The damage modes are primarily in-plane bending for both the side arches and the main arch. This is consistent with the behavior of arch bridges under lateral seismic loading, where the out-of-plane stiffness is typically higher than the in-plane stiffness. The authors also note that the side arches are more vulnerable than the main arch, which is an important observation for retrofit strategies.

Practical Implications for Design and Construction

From my perspective as an engineer who has seen bridges built and inspected, these findings have direct implications for design practice. The identification of the K-shaped wind bracing as a weak point is particularly important. In many bridges, the wind bracing is designed for static wind loads, and the seismic demands may be underestimated. I have seen cases where the diagonal braces were under-designed, leading to buckling or fracture during an earthquake. The paper's recommendation to pay special attention to these elements is well-founded.

The authors also emphasize the importance of considering the first damage time. In a seismic event, the sequence of damage matters. If a secondary element fails first, it can change the load path and lead to a progressive collapse. The paper's approach of tracking the first damage time is a practical way to identify the most critical elements and prioritize retrofitting efforts.

Conclusions and Recommendations

This paper is an excellent example of applied research that directly informs engineering practice. The findings on the vulnerability of the side arch springing and the K-shaped wind bracing are particularly valuable. For designers, the key takeaway is that the seismic design of CFST arch bridges must not focus solely on the main arch. The secondary elements, especially the wind bracing, must be carefully checked and detailed to ensure they can withstand the demands of near-fault earthquakes. For bridge owners and maintenance engineers, the paper provides a clear list of the most vulnerable locations, which can be used to prioritize inspection and retrofitting. I recommend that the design community adopt the PMM yield surface approach for the assessment of these bridges, as it provides a more accurate representation of the biaxial bending and axial load interaction than simpler methods. This is a solid piece of research that will help make our bridges safer.