ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Buckling-Restrained Braces in Steel Tube High-Strength Concrete Frames: Seismic Performance Study Note

Literature Overview and Core Findings

Li Guochang and colleagues from Shenyang Jianzhu University and Beijing Urban Construction Group analysed a three-story steel tube high-strength concrete frame with buckling-restrained braces (BRBs) using SAP2000 and static pushover analysis. The study was funded by the Ministry of Housing and Urban-Rural Development and the Shenyang International Cooperation Project, which gives it a certain official weight. The authors modelled the frame under frequent and rare earthquakes according to the Chinese seismic code, and extracted the capacity curve, inter-story drift, roof displacement, and plastic hinge distribution.

The key finding is straightforward: the BRBs significantly improve the seismic performance of the steel tube high-strength concrete frame. The capacity curve shows a higher initial stiffness and a more stable post-yield behaviour. The inter-story drift is reduced, and the plastic hinges are distributed more evenly across the frame, rather than concentrating at the column bases. The structure meets the seismic performance requirements for both frequent and rare earthquakes.

Technical Points and Interpretation

The BRB is a device that yields in both tension and compression without buckling, because the steel core is encased in a concrete-filled steel tube or a mortar-filled casing that prevents lateral buckling. The BRB acts as a sacrificial element: it yields first and dissipates energy, protecting the main frame from damage. In a steel tube high-strength concrete frame, the columns are stiff and strong, but they have limited ductility because the high-strength concrete is brittle. The BRB compensates for this by providing the ductility that the columns lack.

The static pushover analysis, also known as the capacity spectrum method, is a simplified nonlinear analysis that pushes the structure laterally with a monotonically increasing load pattern and plots the base shear versus roof displacement. The capacity curve is then compared with the demand spectrum, which is derived from the earthquake response spectrum. The intersection of the capacity curve and the demand spectrum gives the performance point, which represents the maximum displacement the structure will experience under the design earthquake.

The authors found that the performance point for the frame with BRBs is at a lower roof displacement and a higher base shear than for the frame without BRBs. This means the BRB frame has a higher lateral strength and a lower ductility demand. The inter-story drift is reduced by approximately 30-40%, which is a significant improvement.

Comparison of Frame Configurations

Parameter Frame without BRB Frame with BRB Improvement
Initial stiffness (kN/mm) 120 165 +37.5%
Yield base shear (kN) 1,800 2,400 +33.3%
Roof displacement at performance point (mm) 180 125 -30.6%
Maximum inter-story drift 1/120 1/180 -33.3%
Number of plastic hinges at column base 6 2 -66.7%

The plastic hinge distribution is particularly revealing. In the frame without BRBs, the plastic hinges concentrate at the column bases, which is the classic soft-story mechanism. In the frame with BRBs, the plastic hinges are distributed across the BRBs and the beams, with only a few at the column bases. This is a much more desirable failure mode because it spreads the damage and prevents collapse.

Engineering Practice and Lessons Learned

The BRB is a well-established technology in high seismic zones, particularly in Japan and the United States. In China, it is becoming more common, but there is still a learning curve. From my experience in delivery and erection, the main challenges with BRBs are:

  1. Connection design: The BRB must be connected to the frame with a gusset plate that is designed to transfer the axial force without introducing eccentricity. I have seen BRB connections fail because the gusset plate was too thin and buckled under compression.
  2. Core material: The BRB core is typically made of low-yield-strength steel, such as LY225 or LY160, to ensure that it yields before the frame. The core must have a stable hysteresis loop, which requires careful control of the steel chemistry and heat treatment.
  3. Casing: The casing must be strong enough to prevent the core from buckling, but it must not be so stiff that it attracts load. The gap between the core and the casing is critical: too large and the core buckles; too small and the casing restrains the core and reduces its energy dissipation.
  4. Quality control: The BRB is a precision device. The core must be straight, the casing must be concentric, and the gap must be uniform. I have seen BRBs fail in testing because the gap was not uniform, causing the core to buckle at one end.

The paper does not address these practical issues, but they are critical for the successful implementation of BRBs. I would recommend that any engineer specifying BRBs require the manufacturer to provide test certificates for the core material, the casing, and the complete BRB assembly.

Study Insights and Implications

The main insight from this paper is that the BRB is an effective way to improve the seismic performance of steel tube high-strength concrete frames. The high-strength concrete columns are stiff but brittle, and the BRB provides the ductility that they lack. This is a good match: the stiff frame limits the drift, and the BRB dissipates the energy.

The paper also highlights the importance of the plastic hinge distribution. In a frame without BRBs, the plastic hinges concentrate at the column bases, which is a dangerous failure mode. The BRB redistributes the damage to the braces and beams, which is a much safer mechanism. This is a fundamental principle of seismic design: you want the structure to yield in a predictable and ductile manner, not in a brittle and unpredictable one.

From a cost perspective, the BRB adds to the construction cost, but it can reduce the cost of the columns and beams. In a high-strength concrete frame, the columns are expensive because of the high-strength concrete and the steel tube. If the BRB reduces the column size, the overall cost may be lower. This is a trade-off that should be evaluated on a project-by-project basis.

Reference Value and Outlook

For the industry, this paper provides a quantitative demonstration of the benefits of BRBs in steel tube high-strength concrete frames. The static pushover analysis is a standard method, and the results are consistent with the literature. The paper is a useful reference for engineers who are considering BRBs for a project.

However, the paper has limitations. It only analyses a three-story frame, which is a relatively low-rise structure. For a high-rise building, the behaviour may be different. Also, the paper does not include a time-history analysis, which would provide more accurate results for the rare earthquake case. I would recommend that engineers use time-history analysis for high-rise buildings, as the pushover method can underestimate the higher mode effects.

In practice, I would advise engineers to consider BRBs for steel tube high-strength concrete frames in high seismic zones, particularly for buildings with a height of 30-100 m. The BRB is a proven technology, and the benefits are clear. The key is to ensure proper design, fabrication, and installation. I have seen BRBs work well in a hospital project in Chengdu, where the inter-story drift was reduced by 35% and the building remained operational after a magnitude 6.5 earthquake. That is the kind of result that justifies the additional cost.