Seismic Fragility Analysis of Buried Steel Pipes in Liquefied Sites
Literature Overview and Core Concept
Liang Zetian, Zheng Shansuo, Liu Xiaohang, Wu Xingxia, and Yang Feng published this paper in the Journal of Tianjin University (Science and Technology) in 2023. The work is funded by the National Key R&D Program and the National Natural Science Foundation, reflecting its significance in the field of earthquake engineering.
The paper addresses a critical problem for buried steel pipelines: seismic vulnerability in liquefied soil. When an earthquake strikes a site with liquefiable soil, the ground loses its bearing capacity, and the buried pipe can float upward due to buoyancy forces. This can cause severe damage, including buckling, rupture, and loss of service.
The authors use the Matasović nonlinear constitutive model combined with the Byrne-modified Martin pore pressure increment model to describe soil behavior. They develop a UMAT (User Material subroutine) for the ABAQUS finite element platform to model liquefiable sand, and they validate this model against shaking table test results. They then create a pipe-soil contact model and perform incremental dynamic analysis to establish demand models for different liquefaction zone lengths and burial depths.
Technical Approach and Modeling Methodology
The paper's technical approach is rigorous and well-structured. The authors recognize that the traditional approach to buried pipe seismic analysis, which treats the soil as a linear elastic medium, is inadequate for liquefied sites. The soil must be modeled with its nonlinear, pore pressure-dependent behavior.
The Matasović model is a well-established constitutive model for cyclic loading of soils. It captures the accumulation of plastic strain and the development of pore pressure under cyclic loading. The Byrne modification to the Martin model provides a practical way to compute pore pressure increments based on cyclic shear strain amplitude.
The UMAT implementation in ABAQUS is a significant technical achievement. It allows the soil to be modeled with its actual nonlinear behavior, including liquefaction, within a standard finite element analysis. The validation against shaking table test results is crucial, as it demonstrates that the model captures the essential physics.
The pipe-soil contact model is another key element. The authors use a combination of solid contact elements and equivalent soil springs to represent the interaction between the pipe and the surrounding soil. This allows the analysis to capture both the local contact behavior and the global response of the pipe.
Seismic Fragility Analysis and Key Findings
The seismic fragility analysis is performed for three different liquefaction zone lengths and three different burial depths. The fragility curves relate the probability of exceeding a given damage state to the earthquake ground motion intensity.
The key findings are clear and important:
| Condition | Effect on Fragility |
|---|---|
| Longer liquefaction zone | Higher probability of exceeding each damage state at the same ground motion intensity |
| Deeper burial | Higher probability of exceeding each damage state at the same ground motion intensity |
The first finding is intuitive. A longer liquefaction zone means more of the pipe is subjected to buoyancy forces and lateral spreading, increasing the demand on the pipe. The second finding is less intuitive but equally important. Deeper burial means the pipe is in a more confined condition, but it also means the pipe is subjected to larger soil displacements and larger buoyancy forces when liquefaction occurs.
The paper establishes an analytical fragility model that relates the pipe damage index to the ground motion intensity. This is a valuable contribution because it allows engineers to perform probabilistic seismic risk assessment for buried pipelines in liquefied sites without running full finite element analyses for every scenario.
Engineering Practice and Implications for Pipeline Design
This paper has direct implications for the design and assessment of buried pipelines in seismic zones. The fragility curves provide a quantitative basis for risk assessment, which is essential for pipeline route selection, design optimization, and emergency planning.
In my experience with pipeline projects, the seismic design of buried pipes is often treated as an afterthought. The pipe is designed for internal pressure, external loads, and corrosion, but the seismic response is sometimes handled with simplified methods that do not capture the complex behavior of liquefied soil.
This paper demonstrates that the seismic response of a buried pipe in a liquefied site is not a simple matter. The buoyancy forces, the soil displacements, and the pipe-soil interaction all contribute to the demand on the pipe. Ignoring these effects can lead to under-designed pipes that fail during an earthquake.
The paper's finding that deeper burial increases fragility is particularly important. In some design codes, deeper burial is assumed to provide more protection. This paper shows that in liquefied sites, the opposite is true. This is a counterintuitive finding that should be incorporated into design practice.
Key Questions and Reflections
The paper raises several questions that are relevant to engineering practice. One question is whether the fragility curves developed for specific soil conditions can be generalized to other sites. The soil properties, the liquefaction potential, and the ground motion characteristics all vary from site to site. The paper's approach can be replicated for specific sites, but the fragility curves themselves are site-specific.
Another question is the treatment of pipe joints. The paper models the pipe as a continuous structure, but real pipelines have joints that may be more vulnerable than the pipe body. The fragility of joints is a separate issue that requires its own analysis.
A third question is the effect of pipe contents. A pipe that is full of gas has a different response than a pipe that is full of liquid. The buoyancy forces are different, and the internal pressure affects the pipe's stiffness and buckling behavior.
Study Insights and Implications for the Industry
This paper is a significant contribution to the field of seismic risk assessment for buried pipelines. It demonstrates that a rigorous approach, combining advanced soil constitutive models with finite element analysis, can produce practical fragility curves for engineering use.
For the industry, the implication is that seismic design of buried pipelines in liquefied sites requires more than a simplified check. The pipe must be analyzed for the combined effects of buoyancy, soil displacement, and pipe-soil interaction. The paper provides a methodology for doing this, and the fragility curves provide a quantitative basis for risk-based design.
The paper also highlights the importance of considering the liquefaction zone length and burial depth as key design parameters. These are not just geometric details; they have a first-order effect on the pipe's seismic vulnerability.
Conclusion
Liang Zetian and colleagues' 2023 paper on seismic fragility analysis of buried steel pipes in liquefied sites is a rigorous and practical contribution to the field. The authors develop a sophisticated numerical model that captures the nonlinear behavior of liquefiable soil, validate it against experimental data, and use it to perform incremental dynamic analysis for a range of conditions. The resulting fragility curves provide a quantitative basis for seismic risk assessment of buried pipelines. The finding that deeper burial increases fragility in liquefied sites is counterintuitive and important for design practice. For the engineer, this paper is a reminder that seismic design of buried pipelines requires a thorough understanding of soil behavior and pipe-soil interaction. For the industry, it is a call to move beyond simplified seismic checks and embrace rigorous, risk-based approaches. The paper's methodology can be replicated for specific sites, and its findings should inform pipeline route selection and design optimization in seismic zones. The veteran's advice is to treat the soil as a dynamic, nonlinear medium, not as a static load, and to always consider the possibility of liquefaction when designing buried pipelines in seismic areas.
Zhuojin Pipe Fitting Co., Ltd