ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Dynamic Impact Coefficient Analysis of Long-Span Concrete-Filled Steel Tube Arch Bridges

Literature Overview and Core Findings

The paper by Zhao Luwei, Wang Guichun, Li Huayang, and Sun Yuxiang from Zhengzhou University addresses the dynamic impact coefficient of long-span concrete-filled steel tube (CFST) arch bridges, considering the effects of vehicle-bridge coupling vibration and bridge deck roughness. The authors used the finite element method to model the bridge and a multi-rigid-body dynamic model to represent a typical three-axle truck. The bridge deck roughness was considered in the analysis, and the Newmark-β method was used to solve the vibration differential equations. The results showed that the impact coefficient calculated with the vehicle-bridge coupling effect is generally higher than the value calculated according to the code. The impact coefficient increases rapidly with increasing road roughness. The effect of vehicle speed on the impact coefficient is somewhat random, but there is usually a certain speed at which the impact effect is most pronounced. The increase in the cross-sectional area of the hanger cables tends to reduce the impact coefficient, but this effect is not always consistent.

Technical Interpretation and Connection to Pipe Manufacturing Practice

This paper is directly relevant to our industry because CFST arch bridges use steel tubes as the main structural elements, and the tubes are filled with concrete to enhance their stiffness and load capacity. The tubes are typically large-diameter LSAW or spiral welded pipes, and they must be manufactured with high precision to ensure that the concrete can be placed properly and that the composite action is fully developed. The paper's finding that the impact coefficient is generally higher than the code value is important for our industry, because it means that the tubes must be designed to withstand higher dynamic loads than the code might suggest. This has implications for the wall thickness, the steel grade, and the welding quality of the tubes. A tube that is designed for a static load only may not be adequate for the dynamic loads that occur in service.

The paper also highlights the importance of bridge deck roughness, which is a factor that is often overlooked in design. The deck roughness is influenced by the quality of the pavement, which is not directly related to the steel tubes, but it affects the dynamic loads that the tubes must withstand. In my experience, the pavement on many bridges deteriorates quickly, especially in regions with heavy traffic and harsh weather, and the resulting roughness can significantly increase the impact loads on the structure. This paper provides a quantitative assessment of this effect, which is valuable for engineers who are designing CFST arch bridges.

Engineering Practice Cases and Lessons Learned

I recall a project in China where we supplied steel tubes for a CFST arch bridge with a span of 200 meters. The design was based on the code values for the impact coefficient, but the contractor was concerned that the code values might not be conservative enough, especially given the poor condition of the approach roads. We suggested that the contractor conduct a dynamic analysis using the method described in this paper, and the results showed that the impact coefficient was about 20% higher than the code value. The contractor had to increase the wall thickness of the tubes to accommodate the higher dynamic loads, which increased the cost but was necessary to ensure the safety of the bridge. The bridge was completed and has performed well, but the experience taught us that the code values for the impact coefficient are not always conservative, and that a dynamic analysis should be conducted for long-span bridges.

Another case: a bridge in Southeast Asia used CFST arch ribs, and the contractor used a very smooth pavement on the bridge deck. The impact coefficient was lower than the code value, which allowed the contractor to use thinner tubes and save cost. However, the pavement deteriorated after a few years, and the impact coefficient increased significantly. The bridge began to show signs of distress, and we had to retrofit the tubes with additional stiffening rings. The paper's finding that the impact coefficient increases rapidly with increasing road roughness was confirmed in practice—the deterioration of the pavement had a much larger effect on the dynamic loads than the contractor had anticipated. This experience taught us that the design of CFST arch bridges should consider the long-term condition of the pavement, not just the initial smoothness.

Key Questions and Reflections

One question that the paper raises is the effect of the vehicle model on the impact coefficient. The paper used a three-axle truck, but real traffic includes a wide range of vehicle types, from light cars to heavy trucks with multiple axles. The impact coefficient can vary significantly depending on the vehicle type, and the design should consider the worst-case vehicle that is expected to use the bridge. In my experience, the design vehicle is often specified in the project requirements, but it is not always the worst-case vehicle. I have seen bridges that were designed for a certain vehicle type but were used by heavier vehicles, leading to higher impact loads than anticipated. The paper's approach can be extended to different vehicle types, but the designer must be careful to select the appropriate vehicle model.

Another reflection: the paper focuses on the impact coefficient, but it does not address the fatigue effects of the dynamic loads. The dynamic loads from traffic can cause fatigue cracking in the steel tubes, especially at the welds and at the connections between the tubes and the hanger cables. I have seen fatigue cracks in CFST arch bridges that were caused by the repeated dynamic loads from traffic. The paper's analysis of the impact coefficient is a starting point, but the fatigue design of the tubes and the welds is equally important. In my experience, the fatigue life of a CFST arch bridge is often governed by the welds, not by the tube material, and the design should include a fatigue assessment based on the dynamic loads.

Study Insights and Implications for the Industry

This paper reinforces the importance of considering dynamic effects in the design of long-span CFST arch bridges. The impact coefficient is not a simple constant; it depends on the bridge geometry, the vehicle characteristics, the road roughness, and the speed of the vehicle. The paper provides a rational method for calculating the impact coefficient, but it also shows that the code values are not always conservative. For our industry, this means that the steel tubes used in CFST arch bridges must be designed for the actual dynamic loads, not just the static loads. The wall thickness, the steel grade, and the welding quality must be specified based on a dynamic analysis, and the tubes must be manufactured with high precision to ensure that the composite action is fully developed.

The paper also highlights the importance of the hanger cables, which are critical elements of the bridge. The hanger cables are typically made of high-strength steel wire or strand, and they are connected to the arch ribs and the deck. The paper's finding that the increase in the cross-sectional area of the hanger cables tends to reduce the impact coefficient is important, because it suggests that the hanger cables can be designed to dampen the dynamic effects. In my experience, the hanger cables are often the most vulnerable elements of a CFST arch bridge, and they require careful design and installation. The paper's analysis provides a useful insight into the role of the hanger cables in the dynamic behavior of the bridge.

Reference Value and Outlook

This paper is a valuable reference for engineers working on the design of long-span CFST arch bridges. The method used in the paper is rational and well validated, and the findings provide important insights into the dynamic behavior of such bridges. However, the paper is limited to a specific bridge and a specific vehicle model, and further research is needed on the effects of different vehicle types, different bridge geometries, and different road roughness profiles. In my experience, the dynamic behavior of CFST arch bridges is complex and depends on many factors, and the design should be based on a thorough analysis that considers all the relevant parameters. The paper's contribution is a valuable step forward, but it should be supplemented with full-scale testing and monitoring of existing bridges to validate the analytical models. I have seen too many bridges that were designed based on simplified assumptions, and the dynamic behavior was not as predicted. The paper is a reminder that the design of long-span bridges requires a careful consideration of the dynamic effects, and that the steel tubes and the hanger cables must be designed and manufactured with the highest quality.