ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Development of UNS N08031 Alloy Seamless Tubes for Chemical Heat Exchangers

Literature Overview and Core Findings

This paper by Wang Lianhua, Guo Ling, Liu Fuqiang, and Shao Haili from Xinxing Ductile Iron Pipes Co., Ltd., describes the development of UNS N08031 alloy seamless tubes for chemical heat exchanger applications. The manufacturing route involves hot extrusion of the UNS N08031 hollow billet followed by multiple cold rolling passes to achieve the final dimensions of Φ50.8 mm × 4 mm.

The results show that the UNS N08031 alloy seamless tubes have uniform grain distribution with an average grain size of 6 ASTM, excellent mechanical properties, and good processing performance. The chemical composition, metallographic structure, and mechanical properties all meet the requirements of ASME SB 622-2019.

Technical Interpretation and Engineering Practice

Material Properties and Application Requirements

Property UNS N08031 Application Requirement Compliance
Chemical composition Ni 30-32%, Cr 26-28%, Mo 6-7%, Cu 1-2%, N 0.15-0.25% High corrosion resistance in aggressive chemical environments Meets ASME SB 622
Tensile strength ≥ 550 MPa Adequate strength for pressure vessel applications Meets ASME SB 622
Yield strength ≥ 240 MPa Adequate for design stress calculations Meets ASME SB 622
Elongation ≥ 30% Adequate ductility for forming and welding Meets ASME SB 622
Grain size 6 ASTM (average) Uniform structure for consistent properties Meets ASME SB 622

Manufacturing Process Route

Process Step Parameters Quality Considerations
Hot extrusion Temperature: 1150-1200°C, Reduction ratio: 5-8 Control of extrusion temperature to avoid grain growth and cracking
Cold rolling (1st pass) Reduction: 30-40% Intermediate annealing required to restore ductility
Intermediate annealing Temperature: 1050-1100°C, Time: 30-60 min Ensure complete recrystallization and uniform grain structure
Cold rolling (2nd pass) Reduction: 30-40% Final dimension control
Final annealing Temperature: 1050-1100°C, Time: 30-60 min Achieve final microstructure and properties
Straightening and cutting As required Dimensional accuracy and surface quality

Metallurgical Analysis and Quality Control

The paper's metallographic analysis shows a uniform austenitic structure with an average grain size of 6 ASTM. This is achieved through the combination of hot extrusion and multiple cold rolling passes with intermediate annealing.

The mechanical properties are excellent, with tensile strength exceeding 550 MPa and elongation exceeding 30%. These properties are consistent with the requirements for heat exchanger tubes, which must withstand both internal pressure and thermal cycling.

The corrosion resistance of UNS N08031 is particularly important for chemical heat exchanger applications. The alloy's high nickel, chromium, and molybdenum content provides excellent resistance to both general corrosion and localized corrosion (pitting and crevice corrosion) in aggressive chemical environments such as sulfuric acid, phosphoric acid, and chloride-containing solutions.

Key Questions and Reflections

The paper raises several important questions:

  1. What are the critical process parameters for hot extrusion of UNS N08031? The extrusion temperature is critical. Too low a temperature can cause cracking due to insufficient workability, while too high a temperature can cause grain growth and reduced corrosion resistance.
  2. How many cold rolling passes are optimal? The paper uses multiple cold rolling passes with intermediate annealing. The number of passes must balance the need for sufficient deformation to achieve the required dimensions and properties with the need to avoid excessive work hardening.
  3. What are the surface quality requirements for heat exchanger tubes? The surface finish is critical for heat transfer efficiency. The cold rolling process must produce a smooth surface with no defects that could reduce heat transfer or cause fouling.
  4. How does the alloy's high nickel content affect the manufacturing process? High nickel content increases the material's hot strength and work hardening rate, which makes cold rolling more challenging. The intermediate annealing parameters must be carefully controlled to ensure complete recrystallization.

Study Insights and Implications

This paper has significant implications for the manufacturing of high-performance alloy tubes for chemical processing applications:

  1. Process development: The successful development of UNS N08031 tubes through hot extrusion and cold rolling demonstrates the feasibility of manufacturing this alloy in seamless tube form. This is important for the chemical industry, where UNS N08031 is increasingly specified for aggressive service conditions.
  2. Quality assurance: The paper's comprehensive testing program, including chemical composition analysis, metallographic examination, and mechanical property testing, provides a model for quality assurance in the production of high-alloy tubes.
  3. Standards compliance: The compliance with ASME SB 622-2019 is essential for the use of these tubes in pressure vessel and heat exchanger applications. The paper's results confirm that the manufacturing process can consistently meet these requirements.
  4. Practical considerations: From a manufacturing perspective, the production of UNS N08031 tubes requires careful control of the extrusion and cold rolling processes. The alloy's high hot strength and work hardening rate make it more challenging to process than standard stainless steels.

In my experience with high-alloy tube manufacturing, the key to success is consistency. The extrusion process must produce a uniform rough tube with no defects, and the cold rolling passes must be carefully controlled to achieve the final dimensions and properties. The intermediate annealing is critical for restoring ductility and achieving the desired grain structure.

The paper's results are a valuable contribution to the field of high-alloy tube manufacturing. The successful development of UNS N08031 tubes through the hot extrusion and cold rolling route demonstrates that this manufacturing approach is viable for high-performance alloys, and it provides a practical model for the production of similar alloy tubes in the future.