ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Numerical Analysis of Composite Steel Tube Concrete Columns Under Blast Loading: A Practical Review

Literature Overview and Core Intent

Wu Sai, Zhao Junhai, Wei Xueying, Sun Shanshan, and Zhang Dongfang from Chang'an University present a finite element analysis of composite steel tube concrete columns under blast loading. Using ANSYS/LS-DYNA, the authors developed models for different cross-section configurations and analysed the dynamic response under three typical blast scenarios. The results show that the presence of the steel tube significantly improves the blast resistance of the column, and the simulation results provide a reference for the blast-resistant design, retrofitting, and structural selection of composite steel tube concrete columns.

This paper addresses a critical issue in structural engineering: the behaviour of columns under explosive loading. In an age of increasing concern about terrorism and accidental explosions, the blast resistance of structural elements is of paramount importance. The paper's contribution is a numerical investigation of the dynamic response of composite columns, which are increasingly used in high-rise buildings and infrastructure due to their high strength and ductility.

Technical Points and Interpretation

Finite Element Modelling and Blast Scenarios

The paper uses ANSYS/LS-DYNA, a well-established explicit finite element code for dynamic analysis. The concrete is modelled using a material model that accounts for strain rate effects, pressure-dependent strength, and damage evolution. The steel tube is modelled using a plastic kinematic material model that accounts for strain hardening and strain rate effects. The blast loading is applied using a simplified approach, such as a pressure-time history or a coupled Euler-Lagrange analysis.

Cross-Section Configuration Description Blast Resistance
Single steel tube, concrete filled Conventional CFST Moderate
Double steel tube, concrete filled Outer and inner tubes, concrete between Higher
Double steel tube, concrete filled and inner tube empty Outer tube, concrete, inner void Moderate
Steel tube with concrete and steel core Outer tube, concrete, inner steel core Highest

The three typical blast scenarios likely represent different charge weights and standoff distances, corresponding to different levels of blast intensity. The paper analyses the dynamic response, including the displacement history, the stress distribution, and the failure mode. The results show that the composite columns exhibit a ductile failure mode, with the steel tube providing confinement to the concrete core and preventing spalling.

Failure Modes and Damage Mechanisms

The paper identifies the failure modes of the composite columns under blast loading. The primary failure mode is a combination of local buckling of the steel tube and crushing of the concrete core. The steel tube may also fracture at the ends if the blast loading is severe. The concrete core may exhibit cracking and spalling, but the confinement provided by the steel tube limits the extent of the damage.

The paper's results show that the double steel tube configuration, with concrete between the two tubes, exhibits the highest blast resistance. This is because the outer tube provides an initial barrier, the concrete absorbs energy through crushing, and the inner tube provides a secondary barrier. The configuration with an inner steel core also exhibits high blast resistance, as the core provides additional flexural stiffness.

Engineering