ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Mechanical Performance of Bolted Connections Between Prefabricated Concrete-Filled Steel Tube Composite Columns and PEC Beams

Literature Overview and Research Context

This paper by Wang Jingfeng, Wang Hanlan, Guo Lei, and Guo Xiang, published in Progress in Steel Building Structures (Vol. 24, No. 7, 2022), investigates the mechanical performance of bolted connections between prefabricated concrete-filled steel tube (CFST) composite columns and partially encased concrete (PEC) beams. The research employs ABAQUS finite element analysis to model the connection behavior, validated against experimental data from horizontal low-cycle reversed loading tests.

The motivation for this work stems from the growing trend toward prefabricated construction, where components are manufactured off-site and assembled on-site. The bolted connection approach offers several advantages over traditional welded connections, including faster assembly, better quality control, and easier disassembly for maintenance or retrofitting.

Numerical Modeling and Validation

The finite element model developed in this study carefully considers the material constitutive relationships and the complex contact interactions at the connection interface. The validation against experimental data is critical, as it establishes the reliability of the numerical model for subsequent parametric studies.

The failure modes and skeleton curves obtained from the numerical analysis show good agreement with the experimental results, confirming that the model captures the essential behavior of the connection. This validation step is often overlooked in numerical studies but is essential for ensuring that the parametric study results are meaningful.

Parametric Study Results and Key Findings

The parametric study considers the effects of geometric parameters, material parameters, and loading parameters on the mechanical performance of the connection. The key findings are as follows.

Parameters Affecting Flexural Bearing Capacity

The analysis identifies five parameters that significantly influence the flexural bearing capacity of the connection: column steel strength, column concrete strength, axial compression ratio, bolt diameter, and column section steel ratio. This is an important finding because it provides design engineers with a clear list of parameters to consider when optimizing the connection design.

Parameters Affecting Initial Stiffness

The initial stiffness of the connection is primarily influenced by the column concrete strength, axial compression ratio, and column section steel ratio. This suggests that the concrete in the column plays a more significant role in determining the initial stiffness than the steel components.

Failure Modes and Skeleton Curves

The failure modes observed in the analysis are consistent with those expected for bolted connections in composite structures. The skeleton curves exhibit the typical three-stage behavior: elastic, elastoplastic, and failure. The bolted connection provides good ductility and energy dissipation capacity, which is essential for seismic applications.

Practical Implications for Prefabricated Construction

From my experience in the steel pipe and structural steel industry, the shift toward prefabricated construction has been one of the most significant changes in recent decades. This research addresses a critical aspect of that shift: the connection between prefabricated components.

Advantages of Bolted Connections

Bolted connections offer several practical advantages over welded connections in prefabricated construction. First, they allow for faster assembly on-site, which reduces construction time and labor costs. Second, they provide better quality control because the bolts can be inspected and tightened to specified torque values. Third, they allow for disassembly and reassembly, which is important for temporary structures or for structures that may need to be modified in the future.

Tolerance and Fit-Up Considerations

One of the challenges with bolted connections in prefabricated construction is the tolerance and fit-up between components. In practice, I have seen numerous cases where the bolt holes do not align properly, requiring reaming or other corrective measures. The design must account for manufacturing tolerances and provide adequate clearance in the bolt holes to ensure that the connection can be assembled without difficulty.

Quality Control of Bolted Connections

The quality control of bolted connections is critical to their performance. The bolts must be properly tightened to the specified torque, and the connection must be inspected for proper fit-up. In high-strength bolted connections, the tension in the bolt is critical to the friction-based load transfer mechanism. If the bolts are not properly tensioned, the connection may slip under load, leading to premature failure.

Lessons Learned and Engineering Insights

The finding that the column steel strength, concrete strength, axial compression ratio, bolt diameter, and column section steel ratio significantly influence the flexural bearing capacity provides a clear framework for design optimization. In practice, this means that the design engineer should consider these parameters holistically when designing the connection.

The initial stiffness is primarily influenced by the concrete strength and axial compression ratio, which suggests that the concrete in the column provides the primary stiffness contribution. This is an important insight because it highlights the role of concrete in the connection behavior, which is sometimes overlooked in favor of the steel components.

For construction practice, the key takeaway is that bolted connections between prefabricated CFST columns and PEC beams can provide excellent mechanical performance, but the design must carefully consider the parameters identified in this study. The connection must be detailed to ensure proper load transfer, and the quality control of the bolted connection must be rigorous.

Summary and Outlook

This research provides a comprehensive numerical study of bolted connections between prefabricated concrete-filled steel tube composite columns and PEC beams, validated against experimental data. The parametric study identifies the key parameters that influence the flexural bearing capacity and initial stiffness of the connection. The findings provide a scientific basis for the analysis and design of such connections in prefabricated construction. For practicing engineers, the key insight is that bolted connections offer a viable alternative to welded connections in prefabricated construction, but the design must account for the identified parameters and the importance of quality control in bolt installation. The research also highlights the need for careful consideration of tolerances and fit-up in prefabricated construction. Future research should investigate the long-term behavior of these connections under fatigue loading and the effects of corrosion on the bolted connection performance.