ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Model Test Study of Steel Pipe Pile Foundations Using Array Displacement Meters

Literature Overview and Study Context

This paper by Zhang Yanfei, Gao Jiancai, Zhang Wei, Du Yong, and Bai Xiaohong from Taiyuan University of Technology, published in Journal of North University of China (Natural Science Edition) (2017, Vol. 38, No. 4, pp. 452-457), presents a model test study of steel pipe pile foundations using array displacement meters (SAA). The study considers three lateral load application angles and three length-to-diameter ratios to investigate the bearing characteristics of the pile foundation model under lateral loads. The SAA is used to monitor the real-time displacement of the pile.

This is a topic that is directly relevant to the use of steel pipe in foundation engineering. Steel pipe piles are widely used in construction, particularly for deep foundations in soft soils. The performance of these piles under lateral loads is critical, and the use of advanced monitoring techniques such as SAA can provide valuable insights into the behaviour of the piles.

Key Technical Findings and Pile Behaviour

SAA Monitoring and Displacement Measurement

The authors demonstrate that the SAA can effectively monitor and record the real-time displacement of the pile. The SAA is a continuous sensor that contains accelerometers, allowing for the measurement of displacement and rotation along the length of the pile. This is a significant advantage over traditional measurement methods, which typically only measure displacement at the pile head.

Measurement Method Advantages Disadvantages
Dial gauge Simple, low cost Only measures at discrete points
LVDT High accuracy Requires fixed reference
Inclinometer Measures rotation Limited to boreholes
SAA Continuous displacement and rotation Higher cost, requires careful installation

The table above compares the SAA with traditional measurement methods. The SAA provides a continuous profile of displacement and rotation along the pile, which is a major advantage for understanding the behaviour of the pile under lateral loads.

Effect of Length-to-Diameter Ratio and Load Angle

The authors report that the length-to-diameter ratio has a significant effect on the ultimate bearing capacity of the pile. As the length-to-diameter ratio increases, the ultimate bearing capacity increases. This is consistent with the expected behaviour of laterally loaded piles, where longer piles have more soil resistance.

The load application angle also has a significant effect. The authors found that the closer the load direction is to horizontal, the higher the ultimate bearing capacity. This is an interesting finding, as it suggests that the pile is more resistant to horizontal loads than to inclined loads. This may be due to the distribution of soil resistance along the pile.

Integration with Steel Pipe Manufacturing and Construction Practice

Steel Pipe Requirements for Pile Foundations

The steel pipe used for pile foundations is typically a seamless or welded pipe made from structural steel. The pipe must have sufficient wall thickness to resist the driving stresses and the service loads. The requirements for the pipe are similar to those for other structural applications, but there are some specific considerations.

Parameter Requirement for Pile Pipes
Diameter 300-1000 mm or more