ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Lateral Impact Behaviour of Hollow Box Concrete-Filled Steel Tube Composite Columns: Test Data and Finite Element Insights

Why This Paper Matters to the Pipe and Construction Industry

The work by Jia Zhilu and Wang Rui from Taiyuan University of Technology addresses a structural configuration that is increasingly common in modern high-rise and industrial construction: the hollow box concrete-filled steel tube (CFST) composite column, where a reinforced concrete outer shell is combined with an inner concrete-filled steel tube. This is not a classic pipe product in the sense of line pipe or process piping, but it is a direct application of steel pipe as a structural element, and as someone who has supplied structural pipe to countless building and bridge projects, I can tell you that the mechanical behaviour of these composite columns under dynamic loading is a subject that deserves far more attention than it gets. The paper focuses on lateral impact, which is the loading scenario that occurs in vehicle collisions, blast events, and seismic actions, and it combines physical testing with finite element analysis to give us a comprehensive picture of the dynamic response.

The authors used a drop hammer test machine of their own design, which is a significant point in itself. Drop hammer testing is the standard approach for studying impact behaviour, but the design and instrumentation of the test rig are critical to obtaining reliable data. The paper reports on the effects of boundary conditions, impact height, and axial compression ratio on the impact force time history and mid-span displacement, and it uses ANSYS/LS-DYNA to build a finite element model that captures the energy distribution among the components. This is a well-structured experimental and numerical study that provides both qualitative insights and quantitative data for engineers designing these columns.

Test Setup and Key Findings

The test specimens were hollow box CFST composite columns, which consist of a reinforced concrete box section with a steel tube embedded in the concrete, and the steel tube is filled with concrete. The drop hammer was released from different heights to generate different impact energies, and the axial compression ratio was varied to simulate different levels of service load. The boundary conditions were varied between simply supported and fixed-fixed, which is an important parameter because real columns are rarely perfectly pinned or perfectly fixed, and the actual boundary condition has a profound effect on the dynamic response.

The most interesting finding from the experimental work is the evolution of the impact force time history with increasing impact height. At lower impact heights, the force time history is two-stage, which typically corresponds to an initial peak as the hammer contacts the specimen, followed by a plateau as the specimen deforms and the inertia effects dominate. At higher impact heights, the force time history becomes three-stage, with a distinct second peak or plateau that the authors attribute to the increasing contribution of the inner steel tube concrete. This is a crucial observation because it tells us that the inner steel tube concrete does not become fully engaged until the impact energy is high enough to cause significant deformation of the outer reinforced concrete section. In other words, the composite action is energy-dependent, and the design must account for the fact that the inner tube may not contribute much under low-energy impacts but becomes a major load-bearing element under high-energy impacts.

The effect of boundary conditions is also significant. The authors found that the fixed-fixed condition provides better deformation resistance than the simply supported condition, which is intuitive but important to quantify. In a fixed-fixed column, the bending moment distribution is different, and the ends can develop plastic hinges that absorb energy, whereas in a simply supported column, the ends are free to rotate and the entire deformation is concentrated in the mid-span region. This means that the fixed-fixed condition not only reduces the maximum displacement but also distributes the damage more evenly, which is beneficial for post-impact repair and residual capacity.

The axial compression ratio was found to have an insignificant effect on the dynamic response, which is a somewhat surprising result. In static loading, the axial load has a major effect on the capacity and failure mode of CFST columns, but under impact loading, the axial load may actually be beneficial because it increases the confinement of the concrete and prevents premature cracking. The fact that the authors found no significant effect suggests that the impact energy dominates over the axial load in this test configuration, and that the axial load is not a primary design parameter for impact resistance in the range tested. This is a useful insight for design engineers, but I would caution against extrapolating it to very high axial loads, where the column may be close to its static capacity and the impact could trigger a sudden failure.

Finite Element Analysis and Energy Distribution

The finite element model using ANSYS/LS-DYNA is a critical component of this study because it allows the authors to examine the energy distribution among the components, which is difficult to measure experimentally. The model was validated against the experimental results, and then used to analyze the internal energy of the outer reinforced concrete, the inner steel tube, and the concrete inside the tube. The key finding is that at higher impact energies, the inner steel tube concrete absorbs up to one-third of the total energy, which confirms that the inner tube is a significant energy absorber and cannot be ignored in design.

This energy distribution analysis is where the paper provides the most value for practical engineering. If the inner tube absorbs one-third of the energy, then the outer reinforced concrete and the steel tube itself are absorbing the remaining two-thirds, and the distribution depends on the impact energy. At low energies, the outer section absorbs most of the energy because it is the first to deform and it has the largest stiffness. At high energies, the outer section may crack and spall, transferring load to the inner tube, which then deforms plastically and absorbs energy through plastic work. This sequential engagement is exactly what the three-stage force time history indicates, and it has important implications for the design of the inner tube and its connection to the outer section.

The finite element model also allows the authors to examine the local damage mechanisms, such as concrete cracking, steel tube yielding, and the interaction between the inner tube and the surrounding concrete. This is where the model can reveal failure modes that are not visible in the experimental tests, such as local buckling of the inner tube or shear failure of the concrete between the tube and the outer section. The authors do not go into great detail on these local mechanisms, but the energy distribution data provides a strong indication of where the damage is occurring.

What the Data Means for Structural Design

From a design perspective, this paper provides several practical takeaways. First, the three-stage force time history means that the design impact force cannot be based on a simple single-peak model. The initial peak is the maximum force, but the subsequent plateau or second peak represents a sustained load that may last longer and cause more damage. Design codes that use a single equivalent static force may underestimate the damage potential of high-energy impacts. Second, the energy absorption by the inner tube concrete should be explicitly accounted for in the design. If the design ignores the inner tube, the column will be over-conservative for low-energy impacts but potentially under-designed for high-energy impacts, which is the wrong direction. Third, the boundary condition is a major design variable, and the designer must have a clear understanding of the actual boundary conditions in the structure. A column that is assumed to be simply supported but is actually fixed will behave differently, and the difference is significant.

The axial compression ratio result is also worth discussing. The authors found no significant effect, but this is likely because the test range was limited. In practice, the axial load on a column in a real structure is determined by the gravity loads and the live loads, and it can be quite high. At high axial loads, the column may be closer to its static capacity, and the impact could cause a sudden loss of capacity. I would recommend that designers treat the axial load as a secondary but not negligible parameter, and that they verify the column capacity under combined axial and impact loading using a more sophisticated analysis if the axial load is high.

Engineering Practice Reflections

Let me share some observations from the field. I have supplied structural pipe for composite columns in several high-rise projects, and I can tell you that the quality of the steel tube is critical for the performance described in this paper. The tube must be manufactured to tight dimensional tolerances, because the concrete fill must be uniform and the tube must not have any local imperfections that could initiate buckling. The weld seam of the tube is a particular concern. In a welded tube, the weld seam is a region of different microstructure and potentially higher hardness, and under impact loading, the weld seam may be a preferential site for crack initiation. I have seen cases where the weld seam of an ERW tube failed under dynamic loading because the weld had a hard HAZ and the toughness was lower than the base metal.

The connection between the inner tube and the outer reinforced concrete section is another critical detail. The paper does not discuss this in detail, but in practice, the inner tube must be anchored to the outer section to ensure composite action. If the tube is not anchored, it can slip relative to the concrete, and the energy absorption will be reduced. Common anchoring methods include shear studs, welded plates, or simply extending the tube through the outer section and anchoring it to the adjacent members. The choice of anchoring method depends on the construction sequence and the load magnitude, but it must be designed to transfer the shear forces that develop during impact.

The construction sequence is also important. In a hollow box CFST composite column, the outer reinforced concrete is typically cast first, and then the inner tube is placed and filled with concrete. This means that the inner tube must be installed after the outer concrete has cured, which can be a logistical challenge on a congested site. Alternatively, the inner tube can be placed first and the outer concrete cast around it, but then the tube must be supported during the concrete pour to prevent it from moving. In either case, the quality of the concrete fill in the tube is critical. The concrete must be self-compacting or adequately vibrated to ensure that there are no voids, because a void in the concrete fill will reduce the energy absorption and create a stress concentration.

Summary and Reflection

This paper is a valuable contribution to the understanding of hollow box CFST composite columns under lateral impact. The combination of experimental testing and finite element analysis provides a comprehensive picture of the dynamic response, and the energy distribution analysis is particularly insightful. The key takeaways for design engineers are that the inner tube concrete becomes fully engaged only at higher impact energies, the boundary condition has a significant effect on the response, and the axial compression ratio has a limited effect in the range tested. For those of us in the pipe supply industry, this paper reinforces the importance of tube quality, weld integrity, and connection design in structural applications. The next step in this research should be to study the effect of the tube diameter-to-thickness ratio on the energy absorption, and to develop design equations that relate the impact energy to the required tube dimensions and concrete strength. That would allow designers to specify the inner tube based on the impact load, rather than relying on empirical rules. This is the kind of research that makes structures safer, and I commend the authors for their thorough and practical approach.