ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Numerical Simulation of Temperature Stress in Steel Tube Concrete Tied-Arch Bridges

Literature Overview and Research Methodology

The paper by Xiong Hongxia and Liu Muyu addresses a specific but critical issue in the design of steel tube concrete tied-arch bridges: the temperature stress in the arch ribs. The authors use the general-purpose finite element software ANSYS to calculate the internal forces and stresses in the control sections of the arch ribs under temperature loads. The study then varies the rise-to-span ratio and the arch axis coefficient to compare the temperature stresses for different design parameters.

The research methodology is straightforward but effective. A finite element model of the tied-arch bridge is created, with the arch ribs, the tie members, and the deck all modeled. The temperature load is applied as a uniform temperature change, and the resulting internal forces and stresses are calculated. The control sections are the crown, the quarter-span, and the arch foot. The study then changes the rise-to-span ratio and the arch axis coefficient, and the analysis is repeated.

The core finding is that the rise-to-span ratio and the arch axis coefficient have a significant effect on the temperature stresses at the crown, but a relatively small effect on the stresses at the quarter-span and the arch foot. This is an important result, as it indicates that the design of the crown section is more sensitive to the geometric parameters than the other sections.

Effect of Rise-to-Span Ratio and Arch Axis Coefficient on Temperature Stress

The parametric study is the heart of the paper, and the results are presented in a clear and concise manner. Let me summarize the key findings in a table.

Design Parameter Effect on Crown Section Effect on Quarter-Span and Arch Foot
Rise-to-Span Ratio Significant effect on axial force and moment Small effect
Arch Axis Coefficient Significant effect on axial force and moment Small effect

The paper shows that as the rise-to-span ratio increases, the axial force in the crown section due to temperature change decreases, while the moment increases. This is because a higher rise-to-span ratio results in a flatter arch, which is more sensitive to temperature-induced bending. The arch axis coefficient, which defines the shape of the arch, also has a significant effect. A higher arch axis coefficient results in a more parabolic arch, which is more efficient in carrying axial loads but more sensitive to temperature-induced bending.

The practical implication is that the design of the crown section must carefully consider the temperature effects, and the geometric parameters should be selected to minimize these effects. The paper provides a useful tool for this optimization.

Practical Design Considerations and Construction Insights

The findings of this paper have several practical implications for the design and construction of steel tube concrete tied-arch bridges.

First, the design of the crown section is critical. The temperature-induced stresses at the crown can be significant, and they must be considered in the design. The paper shows that the rise-to-span ratio and the arch axis coefficient can be optimized to reduce these stresses. This requires a careful balance between the structural efficiency and the temperature performance.

Second, the construction sequence must be carefully planned to minimize the temperature effects. The closure temperature of the arch ribs should be selected to minimize the initial stress, and the construction should be scheduled to avoid extreme temperature conditions. The paper does not provide specific guidance on this, but the general principle is clear.

Third, the quality of the concrete filling is critical. The temperature behavior of the steel tube concrete section depends on the quality of the concrete core. If there are voids or segregation, the thermal conductivity and the stiffness of the section will be affected, leading to unpredictable temperature stresses. The concrete filling must be done with the utmost care, and the quality should be verified with non-destructive testing.

From a manufacturing perspective, the steel tube must be fabricated with precise dimensions to ensure that the concrete filling is uniform. The wall thickness and the diameter must be within the specified tolerance, and the weld seams must be sound. The temperature behavior of the section is sensitive to the geometry, so any deviation from the design will affect the temperature stresses.

In conclusion, this paper provides a valuable contribution to the design of steel tube concrete tied-arch bridges. It highlights the importance of temperature effects and shows how the geometric parameters can be optimized to reduce these effects. The practical implications are clear: the design of the crown section must carefully consider temperature stresses, the construction sequence must be planned to minimize temperature effects, and the quality of the concrete filling must be meticulously controlled. The paper is a useful reference for any engineer involved in the design or construction of these bridges.