ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Calculation of Ultimate Bearing Capacity of Concrete-Filled Steel Tube Arches and Analysis of Related Parameters

Literature Overview and Core Message

This 2004 paper by Deng Jihua and Shao Xudong from Changsha University of Science and Technology and Hunan University addresses a structural engineering problem: how to accurately calculate the ultimate bearing capacity of concrete-filled steel tube (CFST) arches. The authors propose a calculation method that accounts for material nonlinearity, using a fibre element model. The model assumes perfect bonding between the steel tube and the concrete core, and the confining effect of the steel tube on the core concrete is represented by a one-dimensional stress-strain relationship for the core concrete. The authors develop a nonlinear finite element program based on a sub-element approach, which allows for efficient re-meshing by changing the number of sub-elements within each element. The program is validated against model test results, and the effects of the confinement coefficient, the reinforcement ratio, and the concrete strength on the ultimate bearing capacity are analysed.

This paper is a valuable contribution to the field of structural engineering, and it has direct relevance to the steel pipe industry because it addresses the behaviour of steel tubes in composite structures. From my perspective, it is a reminder that the steel pipe is not just a conduit for fluids but also a structural element, and its behaviour in composite structures is a critical design consideration.

Technical Points and Standards Analysis

The paper's main contribution is the development of a calculation method for the ultimate bearing capacity of CFST arches that accounts for material nonlinearity. The key technical points are summarised below.

Fibre Element Model

The fibre element model divides the cross-section of the arch into a number of fibres, each of which is assumed to be in a uniaxial stress state. The stress-strain relationship for each fibre is defined by the material properties. For the steel tube, the stress-strain relationship is typically bilinear, with an elastic modulus and a yield strength. For the core concrete, the stress-strain relationship is more complex, as it accounts for the confining effect of the steel tube.

Confinement Effect

The confining effect of the steel tube on the core concrete is one of the most important aspects of CFST behaviour. When the concrete is subjected to axial compression, it tends to expand laterally. The steel tube resists this lateral expansion, which creates a confining pressure on the concrete. This confining pressure increases the strength and ductility of the concrete.

In the paper's model, the confining effect is represented by a one-dimensional stress-strain relationship for the core concrete. This relationship is calibrated to account for the increase in strength and ductility due to confinement. The authors use a relationship that is based on the work of previous researchers, but they modify it to account for the specific characteristics of the arch.

Sub-Element Approach

The paper introduces a sub-element approach to handle the nonlinear analysis. Each element is divided into a number of sub-elements, and the stiffness matrix of the element is assembled from the stiffness matrices of the sub-elements. This approach allows for efficient re-meshing by changing the number of sub-elements within each element. The authors note that this approach significantly reduces the order of the nonlinear equations, which makes the calculation more efficient.

Validation Against Model Tests

The authors validate their program against the results of model tests on two CFST arches. The calculated ultimate bearing capacities are in good agreement with the test results, which provides confidence in the accuracy of the method.

Parameter Analysis

The authors use the validated program to analyse the effects of three parameters on the ultimate bearing capacity of CFST arches:

  1. Confinement coefficient: The confinement coefficient is defined as the ratio of the yield strength of the steel tube to the compressive strength of the concrete, multiplied by the steel ratio. The analysis shows that the ultimate bearing capacity increases with the confinement coefficient, but the rate of increase diminishes at higher values.
  2. Reinforcement ratio: The reinforcement ratio is defined as the ratio of the cross-sectional area of the steel tube to the total cross-sectional area. The analysis shows that the ultimate bearing capacity increases with the reinforcement ratio, but the effect is less significant than that of the confinement coefficient.
  3. Concrete strength: The analysis shows that the ultimate bearing capacity increases with the concrete strength, but the effect is nonlinear. The increase is more significant at lower concrete strengths.

The results of the parameter analysis are summarised in the table below.

Parameter Effect on Ultimate Bearing Capacity Remarks
Confinement coefficient Increases with the coefficient Diminishing returns at higher values
Reinforcement ratio Increases with the ratio Less significant than confinement coefficient
Concrete strength Increases with the strength Nonlinear effect, more significant at lower strengths

Integration with Engineering Practice

The paper's findings have direct relevance to the design of CFST arches, which are commonly used in bridges and other large-span structures. The design of these structures requires an accurate prediction of the ultimate bearing capacity, which is a critical safety consideration.

The paper's method provides a practical tool for designers to calculate the ultimate bearing capacity of CFST arches. The sub-element approach is particularly useful because it allows for efficient re-meshing, which is important for parametric studies and optimisation.

In my experience, the design of CFST arches requires a careful consideration of the interaction between the steel tube and the concrete core. The confining effect is a critical factor, and it must be accurately represented in the analysis. The paper's approach, which uses a one-dimensional stress-strain relationship for the core concrete, is a practical way to account for this effect.

Study Insights and Reflections

The paper by Deng Jihua and Shao Xudong is a valuable contribution to the field of structural engineering. The authors have developed a practical method for calculating the ultimate bearing capacity of CFST arches that accounts for material nonlinearity. The method is validated against model tests, which provides confidence in its accuracy.

The key insight I take from this paper is that the behaviour of CFST structures is governed by the interaction between the steel tube and the concrete core. The confining effect is the most important factor, and it must be accurately represented in the analysis. The paper's approach, which uses a fibre element model and a sub-element technique, is a practical and efficient way to do this.

The paper also highlights the importance of parameter analysis. By studying the effects of the confinement coefficient, the reinforcement ratio, and the concrete strength, the authors provide valuable insights into the design of CFST arches. This information can be used to optimise the design and to ensure the safety of the structure.

Reference Value and Outlook

This paper is a valuable reference for structural engineers involved in the design of CFST arches and other composite structures. It provides a practical method for calculating the ultimate bearing capacity, and it offers insights into the effects of key parameters.

Looking forward, the field of CFST structures is evolving, and new materials and design methods are being developed. The paper's approach, which is based on a fibre element model, can be extended to account for other factors, such as the effect of creep and shrinkage of the concrete. The sub-element technique is also a useful tool for more complex analyses.

In conclusion, this paper is a valuable contribution to the field of structural engineering. It provides a practical method for calculating the ultimate bearing capacity of CFST arches, and it offers insights into the effects of key parameters. The paper is well-written and the results are well-supported by the validation against model tests. It is a useful reference for anyone involved in the design of CFST structures, and it will continue to be relevant as the field evolves.