ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Acoustic Characteristics of a Marine Confluence Three-Way Control Valve Based on Acoustic-Fluid-Solid Coupling

Literature Overview and Core Question

The paper by Zhou Xu, Zhou Aimin, Shi Hongqi, Zhang Xuedong and Li Shuxun, published in Noise and Vibration Control in 2024, investigates the acoustic characteristics of a confluence three-way control valve used in marine applications. The valve is a PN50 DN250 three-way control valve, which is used to control the flow of fluid in a ship's piping system. The authors use acoustic-fluid-solid coupling theory to analyse the noise generated by the valve, including the sound pressure spectrum and the sound directivity. They first conduct a steady-state flow analysis using the k-ε turbulence model, then use large eddy simulation (LES) for unsteady flow analysis, and finally export the time-domain pressure fluctuations as noise excitation sources for the acoustic analysis. The numerical simulation results are validated by comparison with experimental measurements, which show a difference of only 1.85 dB(A) in the sound pressure level. The authors then simulate the valve's noise at 80 percent and 60 percent opening, obtaining sound pressure levels of 51.18 dB(A) and 54.13 dB(A), respectively, which meet the requirements for marine use.

Technical Interpretation of the Acoustic-Fluid-Solid Coupling Method

The acoustic-fluid-solid coupling method is a sophisticated approach that accounts for the interaction between the fluid flow, the structural vibration, and the acoustic field. In a control valve, the fluid flow generates turbulence, which produces pressure fluctuations. These pressure fluctuations act on the valve body and the internal components, causing them to vibrate. The vibration of the structure, in turn, radiates noise into the surrounding fluid or air. The coupling between these three physical phenomena is complex, and it cannot be captured by a simple acoustic analysis that ignores the fluid flow or the structural dynamics. The authors use a multi-step approach: first, they solve the steady-state flow field using the k-ε model; then, they use the converged flow field as the initial condition for a large eddy simulation, which resolves the large-scale turbulent structures and captures the time-dependent pressure fluctuations; finally, they use the pressure fluctuations on the fluid-solid interface as the excitation for the acoustic analysis. This approach is computationally intensive, but it provides a realistic prediction of the valve's noise.

Engineering Practice and Lessons Learned

For marine applications, noise is a critical concern. Ships have strict noise limits to ensure the comfort of the crew and to avoid interfering with sensitive equipment such as sonar and communication systems. A control valve that generates excessive noise can cause these systems to malfunction, and it can also lead to fatigue failure of the valve components due to vibration. The paper's finding that the valve's noise meets the requirements at both 80 percent and 60 percent opening is important, but it also highlights the need to consider the full range of operating conditions. In practice, a valve may operate at any opening from 0 to 100 percent, and the noise level can vary significantly. The authors only simulated two opening positions, but a more comprehensive analysis would include several positions across the operating range. The paper also demonstrates the importance of validation. The difference of 1.85 dB(A) between the simulation and the measurement is within the typical accuracy of such methods, which gives confidence in the simulation results. However, it is important to note that the validation was conducted at a specific test condition, and the accuracy at other conditions may vary.

Key Insights and Practical Implications

The paper provides a valuable methodology for predicting the noise of control valves, which can be used in the design phase to avoid noise problems. The acoustic-fluid-solid coupling method is more accurate than simpler methods, such as empirical correlations or single-physics acoustic analysis, and it can capture the effects of the valve geometry and the operating conditions. For the pipe fitting industry, the methodology is relevant because control valves are often integrated with pipe fittings, and the noise generated by the valve can propagate through the piping system. The paper also highlights the importance of considering the interaction between the valve and the surrounding piping. The acoustic characteristics of the valve are not only a function of the valve itself but also of the piping system, including the pipe diameter, the wall thickness, and the supports. In a ship, the piping system is complex, and the noise can be transmitted through the structure and the fluid, making the analysis more challenging.

Reference Value and Outlook

This paper is a valuable reference for anyone involved in the design of marine piping systems and control valves. The acoustic-fluid-solid coupling method is a state-of-the-art approach that provides realistic predictions of valve noise, and it can be used to optimise the valve design to meet noise requirements. For the industry, the outlook is towards more comprehensive acoustic analysis that considers the entire piping system, including the valve, the pipes, and the supports. The methodology shown in this paper can be extended to other components, such as tees and elbows, which also generate noise due to flow separation and turbulence. I would recommend that engineers involved in marine piping design study this paper and consider using the acoustic-fluid-solid coupling method for noise prediction. It is a powerful tool that can help avoid costly noise problems in the design phase.