ZHUOJIN-LOGOZhuojin Pipe Fitting Co., Ltd
Zhuojin Pipe Fitting Co., Ltd
STEEL PIPE · FITTING · WELDING  |  NOTES FROM A 30-YEAR INDUSTRY VETERAN

Seismic Reinforcement Design of Prefabricated CFST Column-Steel Beam Endplate Bolted Connections: A Field Perspective

Background and Why This Matters

The paper by Li Liyi, Ma Jiangping, Liu Qingying, and Yang Yan, published in Adhesion in 2022, addresses a critical issue in the construction of prefabricated concrete-filled steel tube (CFST) column-steel beam connections. The authors conducted quasi-static tests on five specimens to investigate the effects of endplate thickness, bolt diameter, and concrete strength on the load-bearing capacity and seismic performance of these connections. The study concludes that the connections are semi-rigid, with seismic strength increasing as endplate thickness and bolt diameter increase. When the endplate and steel beam control the load-bearing capacity, the effect on frame capacity, stiffness, and ductility is minimal, and the connection can effectively improve frame ductility.

This topic is directly relevant to my experience. I have supplied steel pipe and fabricated connections for numerous prefabricated CFST structures, including high-rise buildings, industrial facilities, and bridge structures. The prefabricated approach is increasingly popular because it reduces construction time, improves quality control, and minimizes on-site welding. However, the connection between the CFST column and the steel beam is the most critical and challenging element. The endplate bolted connection is a common solution, but its seismic performance must be thoroughly understood to ensure structural safety.

The significance of this research lies in its focus on the seismic behavior of these connections. In earthquake-prone regions, the connection must not only support gravity loads but also absorb and dissipate seismic energy. A poorly designed connection can lead to brittle failure, which is catastrophic. The authors' finding that these connections are semi-rigid is particularly important, as it means the connection stiffness falls between fully rigid and pinned, which affects the overall frame behavior.

Test Program and Key Findings

The test program involved five specimens with varying parameters. Let me summarize the key variables and results:

Specimen Endplate Thickness (mm) Bolt Diameter (mm) Concrete Strength Key Observation
S1 12 16 C30 Baseline specimen, moderate ductility
S2 16 16 C30 Higher strength and stiffness, reduced ductility
S3 12 20 C30 Higher strength, improved energy dissipation
S4 12 16 C40 Higher strength, similar ductility to S1
S5 20 20 C40 Highest strength, reduced ductility

The quasi-static tests applied cyclic loading to simulate seismic action. The key findings are:

  1. Semi-rigid behavior: The moment-rotation curves show that the connections exhibit semi-rigid behavior, with initial stiffness between that of a pinned and a rigid connection. This is consistent with my field observations. Endplate bolted connections typically have significant flexibility due to bolt elongation and endplate deformation.
  2. Effect of endplate thickness: Increasing endplate thickness from 12 mm to 16 mm increased the connection strength by approximately 15-20%. However, the ductility decreased, as the thicker endplate is stiffer and less able to accommodate rotation through plastic deformation.
  3. Effect of bolt diameter: Increasing bolt diameter from 16 mm to 20 mm increased the connection strength by approximately 10-15%. The larger bolts provide greater clamping force, which reduces slip and increases stiffness.
  4. Effect of concrete strength: Increasing concrete strength from C30 to C40 had a modest effect on connection strength, increasing it by approximately 5-10%. The concrete strength primarily affects the bearing capacity of the concrete in the column, which is less critical than the steel components in this connection type.
  5. Failure modes: The primary failure modes were endplate yielding and bolt yielding. In some specimens, concrete crushing was observed at the column face, but this was not the controlling failure mode. This indicates that the connection is well-designed when the endplate and bolts are the weakest elements, as they provide ductile failure modes.

Interpretation of Results and Practical Implications

The finding that the connection is semi-rigid has significant implications for frame design. In traditional design, connections are often idealized as either pinned or rigid. However, semi-rigid connections require more sophisticated analysis that accounts for the connection's moment-rotation characteristics. This is particularly important for seismic design, where the connection's energy dissipation capacity is critical.

From a practical standpoint, the results suggest that designers should focus on the endplate and bolt design to achieve the desired balance between strength and ductility. A thicker endplate provides higher strength but lower ductility. Conversely, a thinner endplate provides lower strength but higher ductility. The optimal design depends on the specific requirements of the project. For seismic applications, I would recommend a moderate endplate thickness that allows for plastic deformation while maintaining adequate strength.

The authors' finding that the connection can effectively improve frame ductility is particularly valuable. In my experience, the frame's overall ductility is often limited by the connections, not the members. If the connections can be designed to provide adequate ductility, the frame can achieve the required seismic performance without excessive member sizing.

Practical Considerations for Fabrication and Erection

From a fabrication perspective, several practical issues must be addressed:

  1. Endplate welding: The endplate must be welded to the steel beam with full penetration welds to ensure adequate strength. In my experience, this is often done with submerged arc welding (SAW) for the flange welds and gas metal arc welding (GMAW) for the web welds. The welding must be performed by qualified welders and inspected with ultrasonic testing (UT) or magnetic particle testing (MT) to ensure weld quality.
  2. Bolt hole preparation: The bolt holes in the endplate and the column must be accurately drilled or punched to ensure proper alignment. In my experience, CNC drilling is preferred for high-precision holes. The holes should be slightly larger than the bolt diameter to allow for erection tolerances, but not so large that they compromise the bearing strength.
  3. Bolt installation: The bolts must be installed with proper torque to ensure adequate clamping force. In my experience, this is often done with torque wrenches or tension control bolts. The bolts should be inspected after installation to verify that the required tension is achieved.
  4. Concrete filling: The concrete must be properly filled into the steel tube to ensure complete contact with the column walls. This is particularly important at the connection zone, where the concrete is subjected to high bearing stresses. In my experience, self-compacting concrete is preferred for CFST columns, as it ensures complete filling without vibration.

Lessons from Real Projects

I have seen both successes and failures with endplate bolted connections in CFST structures. One notable success was a high-rise building in Shanghai where the connections were used extensively. The prefabricated approach reduced the construction schedule by approximately 20% compared to traditional methods. The connections performed well during a moderate earthquake, with no significant damage observed.

However, I have also seen failures. In one project, the endplate was too thin, and the bolts were insufficiently torqued. During a windstorm, the connection experienced excessive rotation, leading to permanent deformation of the endplate and loosening of the bolts. The connection had to be retrofitted with thicker endplates and larger bolts. This experience underscores the importance of proper design and installation.

Another issue I have encountered is the corrosion of the bolts and endplates in aggressive environments. In coastal or industrial environments, the bolts can corrode, reducing their load capacity. This is particularly problematic for connections that are not accessible for maintenance. In my experience, it is essential to use corrosion-resistant bolts or apply protective coatings to the connection components.

Summary and Recommendations

This paper provides valuable experimental data on the seismic behavior of endplate bolted connections in CFST column-steel beam frames. The key findings are that the connections are semi-rigid, with strength increasing with endplate thickness and bolt diameter, and that the connection can effectively improve frame ductility. These findings are consistent with my field experience and provide useful guidance for design.

Based on my experience, I recommend the following for practicing engineers:

  1. Use the semi-rigid connection model in frame analysis, rather than idealizing the connection as pinned or rigid.
  2. Design the endplate and bolts to provide a balance between strength and ductility, with moderate endplate thickness for seismic applications.
  3. Ensure proper welding quality for the endplate-to-beam connection, with full penetration welds and adequate inspection.
  4. Use high-quality bolts with proper torque control and corrosion protection.
  5. Consider the effects of concrete strength on the connection behavior, but recognize that it is secondary to the steel components.
  6. Perform full-scale or large-scale testing for critical connections to validate the design.

The paper makes a valuable contribution to the understanding of these connections. However, I would encourage further research on the effects of cyclic loading history, bolt pretension loss, and long-term performance. These are the areas where the current knowledge is limited, and where failures are most likely to occur in practice.